High-Strength Titanium-Based Alloy for Low-Temperature Superplastic Forming
Source abstract
Abstract
Reducing the deformation temperature is an important research task for superplastic forming of Ti-based alloys. This study demonstrates that the additions of Fe and B significantly improve microstructural homogeneity and superplastic performance, increase the post-forming mechanical strength, and reduce the superplastic deformation temperature of a Ti-Al-Mo-V alloy. The designed alloy exhibits an excellent superplastic deformation behavior with elongation of 590 to 1050 pct at 675 °C to 775 °C with a constant strain rate in a range of 5 × 10−4 to 5 × 10−3 s−1, and a high room temperature yield strength of 1020 MPa, a UTS of 1080 MPa, and elongation-to-failure of about 6 pct both after annealing and after superplastic deformation with a strain of 0.69 at 775 °C. The microstructure and the strain-induced changes in the size and shape of grains are discussed. The modification of the β-phase morphology leads to an increase in the curvature of interphase boundaries in the modified alloy. Advanced superplasticity and improved mechanical properties make the studied alloy a very attractive material for complex parts in numerous advanced applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. H.S. Yang, G. Gurewitz, and A.K. Mukherjee: Mater. Trans. JIM. (1991) 32:465-472. Doi:10.2320/matertrans1989.32.465.10.2320/matertrans1989.32.465 ↗
2. A.H. Chokshi, A.K. Mukherjee, and T.G. Langdon: Mater. Sci. Eng. R, 1993, vol. 10, pp. 237–74.10.1016/0927-796X(93)90009-R ↗
3. I.I. Novikov and V.K. Portnoj: Superplastizität von Legierungen, 1985.10.1007/978-3-7091-9521-5 ↗
4. N. Ridley: Superplast. Form. Adv. Met. Mater. Methods Appl., 2011, pp. 3–33.
5. Z. Shaoqing and Z. Linruo: J. Alloys Compd. (1995) 218(2): 233-236. doi:10.1016/0925-8388(94)01384-5.10.1016/0925-8388(94)01384-5 ↗
6. X. Li, N. Chen, H. Wu, J. Chen, and F. Qu: Int. J. Hydrogen Energy, 2018, vol. 43, pp. 12455–9.10.1016/j.ijhydene.2018.04.138 ↗
7. T.G. Langdon: J. Mater. Sci., 2009, 44, 4758-476210.1007/s10853-009-3780-5 ↗
8. S.L. Semiatin: Metall. Mater. Trans. A (2020) https://doi.org/10.1007/s11661-020-05625-3.10.1007/s11661-020-05625-3 ↗
9. J.J. Blandin: Materwiss. Werksttech., 2014, vol. 45, pp. 793–8.10.1002/mawe.201400283 ↗
10. H.Z. Niu, F.T. Kong, Y.Y. Chen, and C.J. Zhang: J. Alloys Compd. (2012) 543, 19-25 doi:10.1016/j.jallcom.2012.07.127.10.1016/j.jallcom.2012.07.127 ↗
11. A.O. Mosleh, A. V. Mikhaylovskaya, A.D. Kotov, J.S. Kwame, and S.A. Aksenov: Materials (2019). Doi:10.3390/ma12111756.10.3390/ma12111756 ↗
12. X. Xu, G. Wang, and C. Xia: Mater. Des. (2012) 36, 136-140. doi:10.1016/j.matdes.2011.09.048.10.1016/j.matdes.2011.09.048 ↗
13. S. V. Zherebtsov, E.A. Kudryavtsev, G.A. Salishchev, B.B. Straumal, and S.L. Semiatin: Acta Mater., 2016, vol. 121, pp. 152–63.10.1016/j.actamat.2016.09.003 ↗
14. J.J. Blandin: Mater. Sci. Forum, 2016, vol. 838–839, pp. 13–22.10.4028/www.scientific.net/MSF.838-839.13 ↗
15. R.S. Mishra, V. V. Stolyarov, C. Echer, R.Z. Valiev, and A.K. Mukherjee: Mater. Sci. Eng. A, 2001, vol. 298, pp. 44–50.10.1016/S0921-5093(00)01338-1 ↗
16. C.H. Park, B. Lee, S.L. Semiatin, and C.S. Lee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5203–11.10.1016/j.msea.2010.04.082 ↗
17. W. Zhang, H. Ding, P.H.R. Pereira, Y. Huang, and T.G. Langdon: Mater. Sci. Eng. A, 2018, vol. 732, pp. 398–405.10.1016/j.msea.2018.07.010 ↗
18. M. Kawasaki and T.G. Langdon: Acta Phys. Pol. A, 2015, vol. 128, pp. 470–8.10.12693/APhysPolA.128.470 ↗
19. T. Lee, D.S. Shih, Y. Lee, and C.S. Lee: Metals (Basel)., 2015, vol. 5, pp. 777–89.10.3390/met5020777 ↗
20. M. Kawasaki and T.G. Langdon: Rev. Adv. Mater. Sci., 2018, vol. 54, pp. 46–55.10.1515/rams-2018-0019 ↗
21. Y.G. Ko, C.S. Lee, D.H. Shin, and S.L. Semiatin: Metall. Mater. Trans. A. https://doi.org/10.1007/s11661-006-0008-z.10.1007/s11661-006-0008-z ↗
22. C.H. Park, Y.G. Ko, J.W. Park, and C.S. Lee: Mater. Sci. Eng. A. (2008) 96(1-2), 150-158. Doi:10.1016/j.msea.2008.05.001.10.1016/j.msea.2008.05.001 ↗
23. M.A. Murzinova, G.A. Salishchev, and D.D. Afonichev: Phys. Met. Metallogr., 2007, vol. 104, pp. 195–202.10.1134/S0031918X07080133 ↗
24. E. Alabort, D. Barba, M.R. Shagiev, M.A. Murzinova, R.M. Galeyev, O.R. Valiakhmetov, A.F. Aletdinov, and R.C. Reed: Acta Mater., 2019, vol. 178, pp. 275–87.10.1016/j.actamat.2019.07.026 ↗
25. C. Ouchi, K. Minakawa, K. Takahashi, A. Ogawa, and M. Ishikawa: NKK Tech. Rev., 1992, pp. 61–67.
26. M.L. Meier, D.R. Lesuer, and A.K. Mukherjee: Mater. Sci. Eng. A (1992) 154(2), 165-173. Doi:10.1016/0921-5093(92)90342-x.10.1016/0921-5093(92)90342-x ↗
27. J. Koike, Y. Shimoyama, H. Fujii, and K. Maruyama: Scr. Mater. (1998) 39(8), 1009-1014. https://doi.org/10.1016/s1359-6462(98)00286-3.10.1016/s1359-6462(98)00286-3 ↗
28. D. Klimenko, M. Ozerov, S. Suresh, N. Stepanov, M. Tikhonovsky, G. Salishchev, and S. Zherebtsov: in Defect and Diffusion Forum, 2018.
29. J. Shen, Y. Sun, Y. Ning, H. Yu, Z. Yao, and L. Hu: Mater. Charact., 2019, vol. 153, pp. 304–17.10.1016/j.matchar.2019.05.014 ↗
30. V.Y. Zadorozhnyy, A. Inoue, and D. V. Louzguine-Luzgin: Mater. Sci. Eng. A, 2012, vol. 551, pp. 82–6.10.1016/j.msea.2012.04.097 ↗
31. B.A. Kolachev, V.N. Moiseev, D.V. Ryndenkov, F.S. Mamonova, and E.N. Egorov: Met. Sci. Heat Treat., 2006, vol. 48, pp. 240–3.10.1007/s11041-006-0077-z ↗
32. D.V. Louzguine-Luzgin: Mater. Trans., 2018, vol. 59, pp. 1537–44.10.2320/matertrans.M2018114 ↗
33. V. Sinha, R. Srinivasan, S. Tamirisakandala, and D.B. Miracle: Mater. Sci. Eng. A, 2012, vol. 539, pp. 7–12.10.1016/j.msea.2011.12.058 ↗
34. S. Roy and S. Suwas: Mater. Sci. Eng. A (2013) 574, 205-217. https://doi.org/10.1016/j.msea.2013.03.013.10.1016/j.msea.2013.03.013 ↗
35. V.M. Imayev, R.A. Gaisin, and R.M. Imayev: Mater. Sci. Eng. A, 2015, vol. 641, pp. 71–83.10.1016/j.msea.2015.06.033 ↗
36. S. Tamirisakandala, B. V. Vedam, and R.B. Bhat: J. Mater. Eng. Perform., 2003, vol. 12, pp. 661–73.10.1361/105994903322692466 ↗
37. R. Srinivasan, M.D. Bennett, S. Tamirisakandala, D.B. Miracle, K.O. Yu, and F. Sun: J. Mater. Eng. Perform., 2009, vol. 18, pp. 390–8.10.1007/s11665-008-9307-4 ↗
38. R. Srinivasan, D. Miracle, and S. Tamirisakandala: Mater. Sci. Eng. A, 2008, vol. 487, pp. 541–51.10.1016/j.msea.2007.10.053 ↗
39. S. Roy, A. Sarkar, and S. Suwas: Mater. Sci. Eng. A, 2010, vol. 528, pp. 449–58.10.1016/j.msea.2010.09.026 ↗
40. S. Roy and S. Suwas: Mater. Des. (2014) 58, 52-64. https://doi.org/10.1016/j.matdes.2014.01.033.10.1016/j.matdes.2014.01.033 ↗
41. R. Chen, Y. Yu, S.X. Hui, and W.J. Ye: in Materials Science Forum, 2016.
42. V.Y. Zadorozhnyy, I. V. Shchetinin, N. V. Chirikov, and D. V. Louzguine-Luzgin: Mater. Sci. Eng. A, 2014, vol. 614, pp. 238–42.10.1016/j.msea.2014.07.017 ↗
43. V.K. Chandravanshi, R. Sarkar, S. V. Kamat, and T.K. Nandy: J. Alloys Compd., 2011, vol. 509, pp. 5506–14.10.1016/j.jallcom.2011.02.114 ↗
44. S. Roy, S. Suwas, S. Tamirisakandala, D.B. Miracle, and R. Srinivasan: Acta Mater. (2011) 59(14), 5494-5510. https://doi.org/10.1016/j.actamat.2011.05.023.10.1016/j.actamat.2011.05.023 ↗
45. A.D. Kotov, A. V. Mikhailovskaya, A.O. Mosleh, T.P. Pourcelot, A.S. Prosviryakov, and V.K. Portnoi: Phys. Met. Metallogr., 2019, vol. 120, pp. 60–8.10.1134/S0031918X18100083 ↗
46. A.O. Mosleh, A. V. Mikhaylovskaya, A.D. Kotov, M. Sitkina, P. Mestre-Rinn, and J.S. Kwame: Mater. Res. Express, (2019) 6, 096584. https://doi.org/10.1088/2053-1591/ab31f9.10.1088/2053-1591/ab31f9 ↗
47. A.O. Mosleh, P. Mestre-Rinn, A.M. Khalil, A.D. Kotov, and A. V. Mikhaylovskaya: Mater. Res. Express (2019) 7, 016504. https://doi.org/10.1088/2053-1591/ab59b5.10.1088/2053-1591/ab59b5 ↗
48. A.O. Mosleh, A.D. Kotov, S. V. Medvedeva, and A. V. Mikhaylovskaya: Solid State Phenom., 2020, vol. 306 SSP, pp. 43–52.10.4028/www.scientific.net/SSP.306.43 ↗
49. D. Klimenko, M. Ozerov, S. Suresh, N. Stepanov, M.A. Tikhonovsky, G. Salishchev, and S. Zherebtsov: Defect Diffus. Forum, 2018, vol. 385, pp. 144–9.10.4028/www.scientific.net/DDF.385.144 ↗
50. C.L. Chen and M.J. Tan: Mater. Sci. Eng. A, 2002, vol. 338, pp. 243–52.10.1016/S0921-5093(02)00083-7 ↗
51. J.J. Blandin, B. Hong, A. Varloteaux, M. Suery, and G. L’Esperance: Acta Mater., 1996, vol. 44, pp. 2317–26.10.1016/1359-6454(95)00340-1 ↗
52. T.G. Langdon: J. Mater. Sci. (2006) 41:597-60910.1007/s10853-006-6476-0 ↗
53. R. Boissière, J.J. Blandin, and L. Salvo: J. Eng. Mater. Technol. Trans. ASME, 2008, vol. 130, pp. 0210141–6.10.1115/1.2884335 ↗
54. H. Matsumoto, V. Velay, and A. Chiba: Mater. Des. (2015). 66, 611-617.. https://doi.org/10.1016/j.matdes.2014.05.045.10.1016/j.matdes.2014.05.045 ↗
55. S.W. Kim, J.H. Kim, Y.H. Song, J.K. Hong, Y.T. Hyun, and J.T. Yeom: Mater. Sci. Eng. A (2013) 559, 96-100. https://doi.org/10.1016/j.msea.2012.08.039.10.1016/j.msea.2012.08.039 ↗
56. X. Li, N. Chen, J. Chen, Q. Mei, L. Wan, C. Jia, and H. Liu: Mater. Sci. Eng. A, 2017, vol. 704, pp. 386–90.10.1016/j.msea.2017.08.009 ↗
57. M.F. Ashby and R.A. Verrall: Acta Metall., 1973, vol. 21, pp. 149–63.10.1016/0001-6160(73)90057-6 ↗
58. J.R. Spingarn and W.D. Nix: Acta Metall., 1978, vol. 26, pp. 1389–98.10.1016/0001-6160(78)90154-2 ↗
59. E. Alabort, P. Kontis, D. Barba, K. Dragnevski, and R.C. Reed: Acta Mater., 2016, vol. 105, pp. 449–63.10.1016/j.actamat.2015.12.003 ↗
60. M.A. Rust and R.I. Todd: Acta Mater., 2011, vol. 59, pp. 5159–70.10.1016/j.actamat.2011.04.051 ↗
61. K. Sotoudeh and P.S. Bate: Acta Mater., 2010, vol. 58, pp. 1909–20.10.1016/j.actamat.2009.11.034 ↗
62. A. V. Mikhaylovskaya, O.A. Yakovtseva, I.S. Golovin, A. V. Pozdniakov, and V.K. Portnoy: Mater. Sci. Eng. A, 2015, vol. 627, pp. 31–41.10.1016/j.msea.2014.12.099 ↗
63. H. Masuda, H. Tobe, E. Sato, Y. Sugino, and S. Ukai: Acta Mater., 2019, vol. 176, pp. 63–72.10.1016/j.actamat.2019.06.049 ↗
64. H. Masuda and E. Sato: Acta Mater., 2020, vol. 197, pp. 235–52.10.1016/j.actamat.2020.07.042 ↗
65. Y.G. Ko, W.G. Kim, C.S. Lee, and D.H. Shin: Mater. Sci. Eng. A, 2005, vol. 410–411, pp. 156–9.