journal article·2020-09

Effect of Annealing on the Microstructure, Texture and Mechanical Properties of a Dual-Phase Ultrahigh-strength TWIP Steel

N. K. Tewary, S. K. Ghosh, A. Mandal, D. Chakrabarti, S. Chatterjee

Publisher page

Abstract

The present study investigates the effect of annealing time and temperature on the microstructural restoration (by recovery and recrystallization), texture evolution and tensile properties of a dual-phase TWIP steel. The samples, which were initially hot rolled-air cooled followed by being in solution treated condition, subsequent 50 pct cold rolled condition and different annealing conditions (temperatures ranging from 500 °C to 1000 °C for 5 minutes to 2 hours), were subjected to microstructural characterization using optical and transmission electron microscopy, electron backscatter diffraction analysis, tensile testing and fractographic study. The deformation-induced ferrite (DIF) transformation due to cold deformation, the evolution of the grain structure and texture in both austenite and ferrite, and the change in the DIF fraction (accompanying the recrystallization annealing treatment) are critically analyzed. The optimum combination of strength and ductility is achieved in the partially recrystallized samples annealed at 700 °C for 30 minutes (UTS: 859 MPa, total elongation: 37 pct) and 900 °C for 30 minutes (UTS: 708 MPa, total elongation: 63 pct).The effects of DIF on the evolution of microstructure and texture during annealing and the final properties are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. P. Lan and J. Zhang: Metall. Mater. Trans. A, 2018, vol. 49, pp. 147-161.10.1007/s11661-017-4421-2 ↗
2. P. Kürnsteiner, C. Commenda, E. Arenholz, L. Samek, D. Stifter and H. Groiss: Materialia, 2018, vol. 1, pp. 70-77.10.1016/j.mtla.2018.04.001 ↗
3. P. J. Gibbs, E. De Moor, M. J. Merwin, B. Clausen, J. G. Speer and D. K. Matlock: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3691-3702.10.1007/s11661-011-0687-y ↗
4. G. M. de Bellefon, M.N. Gussev, A.D. Stoica, J.C. van Duysen and K. Sridharan: Scr. Mater., 2018, vol. 157, pp. 162-166.10.1016/j.scriptamat.2018.08.012 ↗
5. O. Grässel, L Krüger, G Frommeyer and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391-1409.10.1016/S0749-6419(00)00015-2 ↗
6. M. Bobbykannan, R.K. Singhraman and S. Khoddam: Corr. Sci., 2008, vol. 50, pp. 2879-2884.10.1016/j.corsci.2008.07.024 ↗
7. YS Chun, K-T Park, CS Lee: Scripta Mater, 2012, vol. 66, pp. 960-965.10.1016/j.scriptamat.2012.02.038 ↗
8. K. Jeong, J-E. Jin, Y-S. Jung, S. Kang and Y-K. Lee: Acta Mater., 2013, vol. 61, pp. 3399-3410.10.1016/j.actamat.2013.02.031 ↗
9. E. Kozeschnik and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 2008, vol. 24, pp. 343-347.10.1179/174328408X275973 ↗
10. D. T. Pierce, D. R. Coughlin, K. D. Clarke, E. De Moor, J. Poplawsky, D. L. Williamson, B. Mazumder, J. G. Speer, A. Hood and A. J. Clarke: Acta Mater., 2018, vol. 151, pp.454-469.10.1016/j.actamat.2018.03.007 ↗
11. D. T. Pierce, D. R. Coughlin, D. L.Williamson, J. Kähkönen, A. J. Clarke, K. D. Clarke, J. G. Speer and E. De Moor: Scr. Mater., 2016, vol. 121, pp. 5-9.10.1016/j.scriptamat.2016.04.027 ↗
12. L. Fu, M. Shan, D. Zhang, H. Wang, W. Wang and A. Shan: Metall. Mater. Trans. A, 2017, vol.48, pp 2179-2192.10.1007/s11661-017-3994-0 ↗
13. O. Bouaziz and N. Guelton: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 246-249.10.1016/S0921-5093(00)02019-0 ↗
14. G. Dini, A. Najafizadeh, R. Ueji and S. M. Monir-Vaghef: Mater. Des., 2010, vol. 31 pp. 3395-3402.10.1016/j.matdes.2010.01.049 ↗
15. E. Bagherpour, M. Reihanian and R. Ebrahimi: Mater. Des., 2012, vol. 36, pp. 391-395.10.1016/j.matdes.2011.11.055 ↗
16. C.Y. Sun, N. Guo, M.W. Fu and S.W. Wang: Int. J. Plast., 2016, vol. 76, pp. 186-212.10.1016/j.ijplas.2015.08.003 ↗
17. Z. C. Luo and M. X. Huang: Scr. Mater., 2018, vol. 142, pp. 28-31.10.1016/j.scriptamat.2017.08.017 ↗
18. N. K. Tewary, S. K. Ghosh, S. Chatterjee and A. Ghosh: Mater. Sci. Eng. A, 2018, vol. 733, pp. 43-58.10.1016/j.msea.2018.07.027 ↗
19. X. Li, L. Chen, Y. Zhao and R. D. K. Misra: Mater. Des., 2018, vol. 142, pp. 190-202.10.1016/j.matdes.2018.01.026 ↗
20. D. B. Santos, A. Saleh, A. A. Gazder, A. Carman, D. M. Duarte, É. A. S. Ribeiro, B. M. Gonzalez, and E. V. Pereloma: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3545-3555.10.1016/j.msea.2011.01.052 ↗
21. D. P. Escobar, S. S. F. de Dafé and D. B. Santos: J. Mater Res. Technol., 2015, vol. 4 pp. 162-170.10.1016/j.jmrt.2014.10.004 ↗
22. Z. Yanushkevich, A. Belyakov, R. Kaibyshev, C. Haase and D. A. Molodov: Mater. Charact., 2016, vol. 112, pp. 180-187.10.1016/j.matchar.2015.12.021 ↗
23. J. Zhang, D. Raabe and C. C. Tasan: Acta Mater., 2017, vol. 141, pp. 374-387.10.1016/j.actamat.2017.09.026 ↗
24. A. Mohamadizadeh, A. Zarei-Hanzaki, A. Kisko and D. Porter: Mater. Des., vol. 92, 2016, pp. 322-329.10.1016/j.matdes.2015.12.040 ↗
25. B. Bhattacharya, R. K. Ray and T. Leffers: Metall. Mater. Trans. A, vol. 46, 2015, pp. 5296-5307.10.1007/s11661-015-3097-8 ↗
26. Y. F. Shen, C. H. Qiu, L. Wang, X. Sun, X.M. Zhao and L. Zuo: Mater. Sci. Eng. A, vol. 561, 2013, pp. 329-33710.1016/j.msea.2012.10.020 ↗
27. A. A. Saleh, E. V. Pereloma, A. A. Gazder: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4537-4549.10.1016/j.msea.2011.02.055 ↗
28. Y. Lü, D. A. Molodov and G. Gottstein: Acta Mater., 2011, vol. 59, pp. 3229-3243.10.1016/j.actamat.2011.01.063 ↗
29. N. K. Tewary, S. K. Ghosh, S. Bera, D. Chakrabarti and S. Chatterjee: Mater. Sci. Eng. A, 2014, vol. 615, pp. 405-415.10.1016/j.msea.2014.07.088 ↗
30. V. Torabinejad, A. Zarei-Hanzaki, M. Sabet and H.R. Abedi: Mater. Des., 2011, vol. 32, pp. 2345-2349.10.1016/j.matdes.2010.12.032 ↗
31. V. Torabinejad, A. Zarei-Hanzaki, S. Moemeni and A. Imandoust: Mater. Des., 2011, vol. 32, pp. 5015-5021.10.1016/j.matdes.2011.06.004 ↗
32. A. Imandoust, A. Zarei-Hanzaki, M. Sabet and H.R. Abedi: Mater. Des., 2012, vol. 40, pp. 556-561.10.1016/j.matdes.2012.04.019 ↗
33. M. H. Razmpoosh, A. Zarei-Hanzaki, N. Haghdadi, J-H. Cho, W. J. Kim, S. Heshmati-Manesh: Mater. Sci. Eng. A, 2015, vol. 638, pp. 5-14.10.1016/j.msea.2015.03.066 ↗
34. A. Imandoust, A. Zarei-Hanzaki, S. Heshmati-Manesh, S. Moemeni and P. Changizian: Mater. Des., 2014, vol. 53, pp. 99-105.10.1016/j.matdes.2013.06.033 ↗
35. I. N. Levine, Physical Chemistry, 6th Edition, McGraw-Hill higher education, New York, 2008, p. 109.
36. T. Matsushita, K. Mukai: The First Law of Thermodynamics: Chemical Thermodynamics in Materials Science, Chapter 7, Springer US, Singapore, 2018, pp. 17-22.10.1007/978-981-13-0405-7_3 ↗
37. C. Zheng, N. Xiao, L. Hao, D. Li and Y. Li: Acta Mater., 2009, vol. 57, pp. 2956-2968.10.1016/j.actamat.2009.03.005 ↗
38. N. Xiao, M. Tong, Y. Lan, D. Li and Y. Li: Acta Mater., 2006, vol. 54, pp. 1265-1278.10.1016/j.actamat.2005.10.055 ↗
39. X. Sauvage and Y. Ivanisenko: J. Mater. Sci., 2007, vol. 42, pp. 1615-1621.10.1007/s10853-006-0750-z ↗
40. L. Zhao, N. Park, Y. Tian, A. Shibata and N. Tsuji: Mater. Res. Lett., 2018, vol. 6, pp. 641-647.10.1080/21663831.2018.1527787 ↗
41. N. K. Tewary, S. K. Ghosh, R. Saha and S. Chatterjee: Philos. Mag., 2019, vol. 99, pp.2487-2516.10.1080/14786435.2019.1628371 ↗
42. L. Liu, C. Li, Y. Yang, Z. Luo, C. Song and Q. Zhai: Mater. Sci. Eng. A, 2017, vol. 679, pp. 282-291.10.1016/j.msea.2016.10.044 ↗
43. B. Bhattacharya, A. S. Sharma, S. S. Hazra and R. K. Ray: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1190-1202.10.1007/s11661-009-9797-1 ↗
44. A. Imandoust, A. Zarei-Hanzaki, K.-L. Ou and C.-H. Yu: J. Mater. Eng. Perform., 2015, vol. 24, pp. 2085-2090.10.1007/s11665-015-1488-z ↗
45. E. Welsch, D. Ponge, S.M. Hafezhaghighat, S. Sandlöbes, P. Choi, M. Herbig, S. Zaefferer and D. Raabe: Acta Mater., 2016, vol. 116, pp. 188-199.10.1016/j.actamat.2016.06.037 ↗
46. D. B. Williams, C. B. Carter, Transmission Electron Microscopy, Second Edition, Springer US, Boston, USA, 2009, pp. 262-265.10.1007/978-0-387-76501-3 ↗
47. W. Reick, M. Pohl and A. F. Padilha: Steel Res. Int., 1996, vol. 67, pp. 253-256.10.1002/srin.199605486 ↗
48. H. Dong and X. Sun: Curr. Opin. Solid State Mater. Sci., 2005, vol. 9, pp. 269-276.10.1016/j.cossms.2006.02.014 ↗
49. L. Bracke, K. Verbeken, L. Kestens and J. Penning: Acta Mater., 2009, vol. 57, pp. 1512-1524.10.1016/j.actamat.2008.11.036 ↗
50. G. W. Yuan and M. X. Huang: Prog. Natur. Sci.: Mater. Int., 2014, vol. 24, pp. 50-55.10.1016/j.pnsc.2014.01.004 ↗
51. R. Song, D. Ponge, D. Raabe and R. Kaspar: Acta Mater., 2005, vol. 53, pp. 845-858.10.1016/j.actamat.2004.10.051 ↗
52. F. Berrenberg, C. Haase, L. A. Barrales-Mora and D. A. Molodov: Mater. Sci. Eng. A, 2017, vol. 681, pp. 56-64.10.1016/j.msea.2016.10.109 ↗
53. A. Hamada and J. Kömi: Mater. Sci. Eng. A, 2018, vol. 718, pp. 301-304.10.1016/j.msea.2018.01.132 ↗