journal article·2020-07

Forecast of Adiabatic Shear Band Formation in Two Commercial Ultra-high-Strength Armor Steels by Split Hopkinson Pressure Bar

Min Cheol Jo, Selim Kim, Hyung Keun Park, Sung Suk Hong, Hong Kyu Kim, Hyoung Seop Kim, Sunghak Lee

Publisher page

Abstract

Formation possibilities of adiabatic shear bands (ASBs) or cracks in two commercial ultra-high-strength armor steels composed of martensite were evaluated by a split Hopkinson pressure bar so that a plausible forecasting method of ASB formation and cracking during the dynamic compression or ballistic impact might be suggested. The present dynamic compressive test effectively investigated the ASB formation behavior and provided a good idea on how many ASBs or cracks form during the ballistic impact.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Electromagnetic Launch and Propulsion Technology · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. [1]A. Marchand, and J. Duffy: J. Mech. Phys. Solids, 1988, vol. 36, pp. 251–83.10.1016/0022-5096(88)90012-9 ↗
2. [2]B. Mishra, P.K. Jena, B. Ramakrishna, V. Madhu, T.B. Bhat, and N.K. Gupta: Int. J. Impact Eng., 2012, vol. 44, pp. 17–28.10.1016/j.ijimpeng.2011.12.004 ↗
3. [3]Q. Xue, M.A. Meyers, and V.F. Nesterenko: Acta Mater., 2002, vol. 50, pp. 575–96.10.1016/S1359-6454(01)00356-1 ↗
4. [4]S.H. Atapek, and S. Karagoz: Def. Sci. J., 2011, vol. 61, pp. 81–7.10.14429/dsj.61.411 ↗
5. [5]F. Martinez, L.E. Murr, A. Ramirez, M.I. Lopez, and S.M. Gaytan: Mater. Sci. Eng. A, 2007, vol. 454–55, pp. 581–89.10.1016/j.msea.2006.11.097 ↗
6. [6]A.G. Odeshi, S. Al-ameeri, and M.N. Bassim: J. Mater. Process. Technol., 2005, vol. 162–63, pp. 385–91.10.1016/j.jmatprotec.2005.02.157 ↗
7. [7]P.K. Jena, B. Mishra, K.S. Kumar, and T.B. Bhat: Mater. Des., 2010, vol. 31, pp. 3308–16.10.1016/j.matdes.2010.02.005 ↗
8. [8]C. Zheng, F. Wang, X. Cheng, K. Fu, J. Liu, Y. Wang, T. Liu, and Z. Zhu: Mater. Sci. Eng. A, 2014, vol. 608, pp. 53–62.10.1016/j.msea.2014.04.032 ↗
9. [9]L.E. Murr, A.C. Ramirez, S.M. Gaytan, M.I. Lopez, E.Y. Martinez, D.H. Hernandez, and E. Martinez: Mater. Sci. Eng. A, 2009, vol. 516, pp. 205–16.10.1016/j.msea.2009.03.051 ↗
10. [10]K. Sun, X. Yu, C Tan, H. Ma, F. Wang, and H. Cai: Mater. Sci. Eng. A, 2014, vol. 595, pp. 247–56.10.1016/j.msea.2013.12.007 ↗
11. [11]M.N. Bassim, and A.G. Odeshi: Arch. Mater. Sic. Eng., 2008, vol. 31, pp. 69–74.
12. [12]A.G. Odeshi, S. Al-ameeri, S. Mirfakhraei, F. Yazdani, and M.N. Bassim: Theor. Appl. Fract. Mech., 2006, vol. 45, pp. 18–24.10.1016/j.tafmec.2005.11.005 ↗
13. [13]S.E. Schoenfeld, and T.W. Wright: Int. J. Solids. Struct., 2003, vol. 40, pp. 3021–37.10.1016/S0020-7683(03)00059-3 ↗
14. [14]Y. Guo, and Y. Li: Acta Mech. Solida Sin., 2012, vol. 25, pp. 299–311.10.1016/S0894-9166(12)60027-5 ↗
15. [15]A. Azimi, G.M. Owolabi, H. Fallahdoost, N. Kumar, and G. Warner: Met. Mater. Int., 2019, vol. 25, pp. 900–11.10.1007/s12540-019-00254-x ↗
16. C. Tang, K. Wu, W. Liu, D. Feng, G. Zuo, W. Liang, Y. Yang, X. Chen, Q. Li, and X. Liu: Met. Mater. Int., 2019, pp. 1–10.
17. [17]J. Peirs, P. Verleysen, J. Degrieck, and F. Coghe: Int. J. Impact Eng., 2010, vol. 37, pp. 703–14.10.1016/j.ijimpeng.2009.08.002 ↗
18. [18]B.B. Singh, G. Sukumar, A. Bhattacharjee, K.S. Kumar, T.B. Bhat, and A.K. Gogia: Mater. Des., 2012, vol. 36, pp. 640–49.10.1016/j.matdes.2011.11.030 ↗
19. Industeel Brochure, MARS300 perforated MARS 300, Industeel, France, 2015.
20. SSAB Data Sheet, Armox Advance, Version 2007, Swedish Steel Oxelösund AB, Sweden, 2007.
21. [21]A.P. Bentley, and G.C. Smith: Metall. Trans. A, 1986, vol. 17, pp. 1593–1600.10.1007/BF02650096 ↗
22. [22]A.G. Odeshi, A.A. Tiamiyu, D. Das, N. Katwal, I.N.A. Oguocha, and A.K. Khan: Mater. Sci. Eng. A, 2019, vol. 754, pp. 602–12.10.1016/j.msea.2019.03.109 ↗
23. [23]S. Da-xiang, Z. Xin-ming, Y. Ling-ying, G. Xing-hui, J. Hai-chun, and G. Gang: Mater. Sci. Eng. A, 2015, vol. 640, pp. 165–70.10.1016/j.msea.2015.05.092 ↗
24. [24]H. Lee, J.H. Choi, M.C. Jo, I. Jo, S.-K. Lee, and S. Lee: Met. Mater. Int., 2018, vol. 24, pp. 894–903.10.1007/s12540-018-0092-9 ↗
25. MIL-DTL-46100E (MR), Armor Plate, Steel, Wrought, High-Hardness, 2008.
26. [26]J.A. Hines and K.S. Vecchio: Acta Mater., 1997, vol. 45, pp. 635–49.10.1016/S1359-6454(96)00193-0 ↗
27. [27]Y.F. Xue, H.N. Cai, L. Wang, F.C. Wang, and H.F. Zhang: Mater. Sci. Eng. A, 2007, vol. 445–46, pp. 275–80.10.1016/j.msea.2006.09.025 ↗
28. [28]H. Song, D.G. Kim, D.W. Kim, M.C. Jo, Y.H. Jo, W. Kim, H.S. Kim, B.-J. Lee, and S. Lee: Sci. Rep., 2019, vol. 9, pp. 6163.10.1038/s41598-019-42704-x ↗
29. [29]M.A. Meyers, and H.-R. Pak: Acta Metall., 1986, vol. 34, pp. 2493–99.10.1016/0001-6160(86)90152-5 ↗
30. [30]Y. Zou, W. Qin, E. Irissou, J.-G. Legoux, S. Yue, and J.A. Szpunar: Scr. Mater., 2009, vol. 61, pp. 899–902.10.1016/j.scriptamat.2009.07.020 ↗
31. [31]A.A. Tiamiyu, A.G. Odeshi, and J.A. Szpunar: Materialia, 2018, vol. 4, pp. 81–98.10.1016/j.mtla.2018.09.016 ↗
32. [32]B. Hwang, S. Lee, Y.C. Kim, N.J. Kim, and D.H. Shin: Mater. Sci. Eng. A, 2006, vol. 441, pp. 308–20.10.1016/j.msea.2006.08.045 ↗
33. [33]M.A. Meyers, U.R. Andrade, and A.H. Chokshi: Metall. Mater. Trans. A, 1995, vol. 26, pp. 2881–93.10.1007/BF02669646 ↗
34. [34]L. Tang, Z. Chen, C. Zhan, X. Yang, C. Liu, and H. Cai: Mater. Charact., 2012, vol. 64, pp. 21–6.10.1016/j.matchar.2011.11.011 ↗
35. [35]M.A. Meyers, Y.B. Xu, Q. Xue, M.T. Pérez-Prado, and T.R. McNelley: Acta Mater., 2003, vol. 51, pp. 1307–25.10.1016/S1359-6454(02)00526-8 ↗
36. [36]A.A. Tiamiyu, A.Y. Badmos, and A.G. Odeshi: Mater. Des., 2016, vol. 89, pp. 872–83.10.1016/j.matdes.2015.10.047 ↗
37. [37]T. Kozmel, M. Vural, and S. Tin: J. Mater. Sci., 2016, vol. 51, pp. 7554–70.10.1007/s10853-016-0035-0 ↗
38. [38]R.L. Woodward: Int. J. Mech. Sci., 1978, vol. 20, pp. 599–607.10.1016/0020-7403(78)90018-8 ↗
39. [39]T.W. Wright: J. Mech. Phys. Solids, 1990, vol. 38, pp. 515–30.10.1016/0022-5096(90)90012-S ↗
40. G. Sukumar, B. BhavSingh, A Bhattacharjee, K. SivaKumar, and A.K. Gogia: Int. J. Impact. Eng., 2013, vol. 54, pp. 149–60.10.1016/j.ijimpeng.2012.11.002 ↗
41. [41]B.B. Singh, G. Sukumar, P.P. Rao, K.S. Kumar, V. Madhu, and R.A. Kumar: Mater. Sci. Eng. A, 2019, vol. 751, pp. 115–27.10.1016/j.msea.2019.02.044 ↗
42. J.-K. Hwang: Met. Mater. Int., 2019, pp. 1–14.
43. N. Li, Y.D. Wang, R. LinPeng, X. Sun, P.K. Liaw, G.L. Wu, L. Wang, and H.N. Cai: Acta Mater., 2011, vol. 59, pp. 6369–77.10.1016/j.actamat.2011.06.048 ↗
44. [44]Y. Me-Bar and D. Shechtman: Mater. Sci. Eng., 1983, vol. 58, pp. 181–88.10.1016/0025-5416(83)90044-7 ↗