journal article·2019-01

The Correlation Between the Distribution/Size of Carbides and Electrochemical Behavior of 17Cr-1Ni Ferritic-Martensitic Stainless Steel

Li Wang, Chaofang Dong, Qiang Yu, Cheng Man, Yabo Hu, Zongbiao Dai, Xiaogang Li

Publisher page

Abstract

The correlation between the distribution/size of carbides and corrosion resistance of 17Cr-1Ni ferritic-martensitic stainless steel after different heat treatment temperatures was investigated by transmission electron microscope, electrochemical tests, and corrosion morphology observations. The results showed that the size of the precipitated phase decreased and corrosion resistance increased with an increase in the annealing temperature. When the tempering temperature was low (290 °C), carbides precipitated mainly at the phase boundaries due to a low degree of atomic matching and higher grain boundary energy. In this case, the polarization curve had a passivation interval and the pits were mainly initiated at the phase boundary. When the tempering temperature was higher than 400 °C, the carbides gradually precipitated in the martensite laths because the accelerated diffusion of Cr healed the Cr depletion zone at phase boundary. This outcome resulted in a polarization curve that had no passivation range and uniform corrosion occurred in martensitic region.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. [1] Y. Kayali and B. Anaturk: Mater. Design, 2013, vol. 46, pp. 776-783.10.1016/j.matdes.2012.11.040 ↗
2. 2.A. Bag, K.K. Ray and E.S. Dwarakadasa: Metall. Mater. Trans. A, 1999, vol. 30, pp. 1193–1202.10.1007/s11661-999-0269-4 ↗
3. [3]M. Bellavoine, M. Dumont, J. Drillet, V. Hébert and P. Maugis: Metall. Mater. Trans. A., 2018, vol. 49, pp. 2865-2875.10.1007/s11661-018-4642-z ↗
4. [4] S. Gündüz: Mater. Lett.,2009, vol. 63, pp. 2381-2383.10.1016/j.matlet.2009.08.015 ↗
5. [5] A. Neville, T. Hodgkiess:Corros. Sci., 1996,vol. 38, pp. 927-956.10.1016/0010-938X(96)00180-1 ↗
6. [6] S. Qu, X. Pang, Y. Wang and K. Gao:Corros. Sci., 2013,vol. 75, pp. 67-77.10.1016/j.corsci.2013.05.017 ↗
7. [7] F.U. Yan: Acta. Metall. Sin., 2005, vol.41, pp. 302-306.
8. [8]Y.Z. Shen, Z.X. Shang, Z.Q. Xu, W.W. Liu, X.Huang and H.Liu: Mater.Charact.,2016,vol.119,pp.13-23.10.1016/j.matchar.2016.06.035 ↗
9. [9] H.W. Hayden and S. Fwreen: Metall. Trans.,1970,vol.1,pp.1955-1959.10.1007/BF02642795 ↗
10. [10] K.M. Adhe, V. Kain, K. Madangopal and HS Gadiyar: J. Mater. Eng. Perform., 1996, vol. 5, pp. 500-506.10.1007/BF02648847 ↗
11. [11] G.C. Palit, H.S. Gadiyar and V.C. Kain: Corros.-HoustonTx-.,1993, vol. 49,pp. 977-991.10.5006/1.3316025 ↗
12. [12] V. Kain, G.C. Palit, S.S. Chouthai, H.S. Gadiyar: J. Electrochem. Soc., 1989 vol. 38, pp. 50-54.
13. [13] K. Chandra, V. Kain and R. Tewari: Corros. Sci., 2013,vol. 67, pp. 118-129.10.1016/j.corsci.2012.10.011 ↗
14. V. Vigna, S. Ringeval, S. Thiébaut, K. Tabalaiev, C. Dessolin, O. Heintz, Heintzac, F. Herbstac, and R. Chassagnonac: Corros. Sci., 2014, vol. 85, pp. 42–51.10.5006/1.3278163 ↗
15. V. Vigna, S. Ringeval, S. Thiébaut, K. Tabalaiev, C. Dessolin, O. Heintz, Heintzac, F. Herbstac, and R. Chassagnonac: Corros. Sci., 2014, vol. 85, pp. 42–51.10.1016/j.corsci.2014.03.036 ↗
16. 16.S.K. Bonagani, V. Bathula, V. Kain: Corros. Sci., 2018, vol. 131, pp. 340–54.10.1016/j.corsci.2017.12.012 ↗
17. [17] B. Tang, L. Jiang, R. Hu and Q. Li: Mater. Charact., 2013, vol. 78, pp. 144-150.10.1016/j.matchar.2013.02.006 ↗
18. [18]R. Jones, V. Randle and G. Owen: Metall. Mater. Trans. A., 2008, vol. 496, pp. 256-261.
19. [19] T.N. Prasanthi, C. Sudha, V.T. Paul, N.S. Bharasi, S. Saroja and M. Vijayalakshmi: Metall. Mater. Trans. A., 2014, vol. 45, pp. 4220-4234.10.1007/s11661-014-2361-7 ↗
20. 20.S. Pahlavan, S. Moazen, I. Taji, K. Saffar, M. Hamrah, M.H. Moayed and SM Beidokhti: Corros. Sci., 2016, vol. 112, pp. 233-240.10.1016/j.corsci.2016.07.008 ↗
21. 21.P.P. Sarkar, P. Kumar, MK Manna and P.C. Chakraborti: Mater. Lett., 2005, vol. 59, pp. 2488-491.10.1016/j.matlet.2005.03.030 ↗
22. 22.Y. Zhao, W. Zhang, Z. Liu and G. Wang: Mater. Sci. Eng. A, 2017, vol. 702, pp. 279-88.10.1016/j.msea.2017.07.020 ↗
23. [23] T.H. Lee, Y.J. Lee, S.H. Joo, H.H. Nersisyan, K.T. Park and J.H. Lee: Metall. Mater. Trans. A., 2015, vol. 46, pp. 4020-4226.10.1007/s11661-015-3003-4 ↗
24. 24.D.C. Kong, A.N. Xu, C.F. Dong, F.X. Mao, K. Xiao, X.G. Li and DD Macdonaldb: Corros. Sci., 2017, vol. 116, pp. 34-43.10.1016/j.corsci.2016.12.010 ↗
25. [25] X. Wang, Y. Li, H. Li, S. Lin, Y. Ren and X. Wang: J. Mater. Process. Tech., 2018, vol. 252, pp. 618-627.10.1016/j.jmatprotec.2017.09.015 ↗
26. 26.L.D. Barlow and M.D. Toit: J. Mater. Eng. Perform., 2012, vol. 21, pp. 1327-1336.10.1007/s11665-011-0043-9 ↗
27. [27] Z. Xu, Z. Ding, L. Dong and B. Liang: Metall. Mater. Trans. A., 2016, vol. 47, pp. 1-7.
28. 28.S.Y. Lu, K.F. Yao, Y.B. Chen, M.H. Wang and X.Y. Ge: Metall. Mater. Trans. A., 2015, vol. 46, pp. 6090-6102.10.1007/s11661-015-3180-1 ↗
29. [29] S.Y. Lu, K.F. Yao, Y.B. Chen, M.H. Wang, X. Liu and X. Ge: Electrochim. Acta, 2015, vol. 165, pp. 45-55.10.1016/j.electacta.2015.02.038 ↗
30. 30.Q. Yu, C.F. Dong, Y.H. Fang, K. Xiao, C.Y. Guo, G. He and X.G. Li: J. IronSteel Res. Int., 2016, vol. 23, pp. 1061-1070.
31. [31] H. Luo, C.F. Dong, X.G. Li and K. Xiao: Electrochim. Acta, 2012, vol. 64, pp. 211-220.10.1016/j.electacta.2012.01.025 ↗
32. [32] Y.S. Choi, J.G. Kim, Y.S. Park and J.Y. Park: Mater. Lett.,2007, vol. 61, pp. 244-247.10.1016/j.matlet.2006.04.041 ↗
33. [33] C. Man, C.F. Dong, Z.Y. Cui, K. Xiao, Q Yu and X.G. Li: Appl. Surf. Sci., 2018, vol. 427, pp. 763-773.10.1016/j.apsusc.2017.08.151 ↗
34. [34] J. Jayaraj, K.R. Ravi, C. Mallika and U.K. Mudali: Metall. Mater. Trans. A., 2016, vol. 47, pp. 1-11.
35. 35.R.C. Ming, Y. Che, X. Dong and X. Chao: J. Mater. Sci. Technol., 2012, vol. 28, pp. 1059–66.10.1016/S1005-0302(12)60173-X ↗
36. J.M. Pardal, M.R.D. Silva, I.N. Bastos, MCSD Macado and SSM Tavares: Br. Corros. J., 2016, vol. 51, pp. 337–41.10.1080/1478422X.2015.1110418 ↗
37. 37.C.T.Liu and J.K. Wu: Corros. Sci., 2007, vol. 49, pp. 2198-2209.10.1016/j.corsci.2006.10.032 ↗
38. 38.S. Ningshen, M. Sakairi, K. Suzuki and S Ukai: Appl. Surf. Sci., 2013, vol. 274, pp. 345-55.10.1016/j.apsusc.2013.03.059 ↗
39. [39] Y. Fu, X. Wu, E.H. Han, W. Ke, K. Yang and Z. Jiang: Electrochim. Acta, 2009, vol. 54, pp. 1618-1629.10.1016/j.electacta.2008.09.053 ↗
40. [40] X.P. Ma, L.J. Wang, B. Qin, C.M. Liu and S.V. Subramanian: Mater. Design, 2012, vol. 34, pp. 74-81.10.1016/j.matdes.2011.07.064 ↗
41. [41] K. Asami, K. Hashimoto and S. Shimodaira: Corros. Sci., 1977,vol. 17, pp. 713-723.10.1016/0010-938X(77)90067-1 ↗