Evolution of Microstructure and Carbon Distribution During Heat Treatments of a Dual-Phase Steel: Modeling and Atom-Probe Tomography Experiments
Source abstract
Abstract
The temporal evolution of microstructures and carbon distributions in a Fe-0.323C-1.231Mn-0.849Si (mol pct) dual-phase steel during heat treatments are simulated using a two-dimensional cellular automaton model. The model involves austenite nucleation, phase transformations controlled by ferrite (α)/austenite (γ) interface mobility and the local carbon concentration, and long-range carbon diffusion. It is also coupled with a solute drag model to account for the effect of substitutional elements on the interface migration. The results show that after holding at 800 °C for 300 seconds the transformed γ-volume fraction is lower than the paraequilibrium prediction. During subsequent cooling at 6 °C s−1, the γ → α transformation takes place after a stagnant stage; the carbon concentrations in both the α- and γ-phases increase and become non-uniform. When cooled below 450 °C, the γ-volume fraction is nearly unchanged. A small amount of carbon enriched martensite, transformed from the remaining γ-phase, exists in the room temperature microstructure. The simulated microstructures and carbon concentrations in martensite compare reasonably well with the experimental micrographs and atom-probe tomographic measurements. During tempering at 400 °C, martensite decomposes and the carbon concentration in the α-matrix increases. The simulation results are used to understand the mechanisms of yield strength variations after different heat treatments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. [1] M. Gouné, F. Danoix, J. Ågren, Y. Bréchet, C.R. Hutchinson, M. Militzer, G. Purdy, S. van der Zwaag, and H. Zurob: Mater. Sci. Eng. R-Rep., 2015, vol. 92, pp. 1–38.10.1016/j.mser.2015.03.001 ↗
2. [2] C.C. Tasan, M. Diehl, D. Yan, M. Bechtold, F. Roters, L. Schemmann, C. Zheng, N. Peranio, D. Ponge, M. Koyama, K. Tsuzaki, and D. Raabe: Annu. Rev. Mater. Res., 2015, vol. 45, pp. 391–431.10.1146/annurev-matsci-070214-021103 ↗
3. [3] G. Krauss: Steels: Processing, Structure, and Performance, Second Edition, ASM International, Materials Park, Ohio, 2015.10.31399/asm.tb.spsp2.9781627082655 ↗
4. [4] J. Sietsma and S. van der Zwaag: Acta Mater., 2004, vol. 52, pp. 4143–52.10.1016/j.actamat.2004.05.027 ↗
5. [5] C. Bos and J. Sietsma: Scr. Mater., 2007, vol. 57, pp. 1085–8.10.1016/j.scriptamat.2007.08.030 ↗
6. [6] M.G. Mecozzi, C. Bos, and J. Sietsma: Acta Mater., 2015, vol. 88, pp. 302–13.10.1016/j.actamat.2015.01.058 ↗
7. [7] A. Hultgren: Trans. ASM., 1947, vol. 39, pp. 915–1005.
8. [8] G.R. Purdy and Y.J.M. Brechet: Acta Metall. Mater., 1995, vol. 43, pp. 3763–74.10.1016/0956-7151(95)90160-4 ↗
9. [9] H. Chen and S. van der Zwaag: Acta Mater., 2014, vol. 72, pp. 1–12.10.1016/j.actamat.2014.03.034 ↗
10. [10] Z.Q. Liu, G. Miyamoto, Z.G. Yang, and T. Furuhara: Acta Mater., 2013, vol.61, pp. 3120–9.10.1016/j.actamat.2013.02.003 ↗
11. [11] Y. Kubo, K. Hamada, and A. Urano: Ultramicroscopy, 2013, vol. 135, pp. 64–70.10.1016/j.ultramic.2013.05.011 ↗
12. [12] T.F. Kelly and M.K. Miller: Rev. Sci. Instrum., 2007, vol. 78, p. 031101.10.1063/1.2709758 ↗
13. [13] D.N. Seidman: Annu. Rev. Mater. Res., 2007, vol. 37, pp. 127–58.10.1146/annurev.matsci.37.052506.084200 ↗
14. [14] Y.R. Wen, Y.P. Li, A. Hirata, Y. Zhang, T. Fujita, T. Furuhara, C.T. Liu, A. Chiba, and M.W. Chen: Acta Mater., 2013, vol. 61, pp. 7726–40.10.1016/j.actamat.2013.09.011 ↗
15. [15] Y. Toji, H. Matsuda, M. Herbig, P.-P. Choi, and D. Raabe: Acta Mater., 2014, vol. 65, pp. 215–28.10.1016/j.actamat.2013.10.064 ↗
16. [16] M.I. Hartshorne, D. Isheim, D.N. Seidman, and M.L. Taheri: Ultramicroscopy, 2014, vol. 147, pp. 25–32.10.1016/j.ultramic.2014.05.005 ↗
17. [17] S.-I. Baik, L. Ma, Y.-J. Kim, B. Li, M. Liu, D. Isheim, B.I. Yakobson, P.M. Ajayan, and D.N. Seidman: Small, 2015, vol. 11, pp. 5968–74.10.1002/smll.201501679 ↗
18. [18] J. Rudnizki, B. Böttger, U. Prahl, and W. Bleck: Metall. Mater. Trans. A, 2011, vol. 42, pp. 2516–25.10.1007/s11661-011-0626-y ↗
19. [19] C. Zheng and D. Raabe: Acta Mater., 2013, vol. 61, pp. 5504–17.10.1016/j.actamat.2013.05.040 ↗
20. [20] B. Su, Z. Han, and B. Liu: ISIJ Int., 2013, vol. 53, pp. 527–34.10.2355/isijinternational.53.527 ↗
21. [21] B. Zhu, Y. Zhang, C. Wang, P.X. Liu, W.K. Liang, and J. Li: Metall. Mater. Trans. A, 2014, vol. 45, pp. 3161–71.10.1007/s11661-014-2255-8 ↗
22. [22] G. Zhu, Y. Kang, C. Lu, and S. Li: Steel Res. Int., 2014, vol. 85, pp. 1035–46.10.1002/srin.201300138 ↗
23. [23] M. Militzer, M.G. Mecozzi, J. Sietsma, and S. van der Zwaag: Acta Mater., 2006, vol. 54, pp. 3961–72.10.1016/j.actamat.2006.04.029 ↗
24. [24] D.Z. Li, N.M. Xiao, Y.J. Lan, C.W. Zheng, and Y.Y. Li: Acta Mater., 2007, vol. 55, pp. 6234–49.10.1016/j.actamat.2007.07.041 ↗
25. [25] D.S. Svyetlichnyy and A.I. Mikhalyov: ISIJ Int., 2014, vol. 54, pp. 1386–95.10.2355/isijinternational.54.1386 ↗
26. [26] B. Su, Q. Ma, and Z. Han: Steel Res. Int., 2017, vol. 88, p. 1600490.10.1002/srin.201600490 ↗
27. [27] C. Bos, M.G. Mecozzi, and J. Sietsma: Comput. Mater. Sci., 2010, vol. 48, pp. 692–9.10.1016/j.commatsci.2010.03.010 ↗
28. [28] B. Zhu and M. Militzer: Metall. Mater. Trans. A, 2015, vol. 46, pp. 1073–84.10.1007/s11661-014-2698-y ↗
29. [29] B. Zhu, H. Chen, and M. Militzer: Comput. Mater. Sci., 2015, vol. 108, pp. 333–41.10.1016/j.commatsci.2015.01.023 ↗
30. [30] H. Chen, B. Zhu, and M. Militzer: Metall. Mater. Trans. A, 2016, vol. 47, pp. 3873–81.10.1007/s11661-016-3595-3 ↗
31. [31] D. An, S. Pan, L. Huang, T. Dai, B. Krakauer, and M. Zhu: ISIJ Int., 2014, vol. 54, pp. 422–9.10.2355/isijinternational.54.422 ↗
32. Image Tool Program. University of Texas Health Science Center, San Antonio, 2002. http://compdent.uthscsa.edu/dig/itdesc.html. Accessed 05 March 2018.
33. [33] G. Krauss: Mater. Sci. Eng. A, 1999, vol. 273–275, pp. 40–57.10.1016/S0921-5093(99)00288-9 ↗
34. [34] G.R. Speich and W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 1043–54.10.1007/BF02642436 ↗
35. G.F. Vander Voort: Atlas of Time-Temperature Diagrams for Irons and Steels, ASM International, Materials Park, Ohio, 1991.
36. [36] O.C. Hellman, J.A. Vandenbroucke, J. Rüsing, D. Isheim, and D.N. Seidman: Microsc. Microanal., 2000, vol. 6, pp. 437–44.10.1007/S100050010051 ↗
37. [37] P.H. Chang and A.G. Preban: Acta Metall., 1985, vol. 33, pp. 897–903.10.1016/0001-6160(85)90114-2 ↗
38. [38] A.H. Cottrell and B.A. Bilby: Proc. Phys. Soc. Sect. A, 1949, vol. 62, pp. 49–62.10.1088/0370-1298/62/1/308 ↗
39. [39] E.O. Hall: Yield Point Phenomena in Metals and Alloys, Springer US, Boston, MA, 1970.10.1007/978-1-4684-1860-6 ↗
40. [40] R. Rementeria, J.D. Poplawsky, M.M. Aranda, W. Guo, J.A. Jimenez, C. Garcia-Mateo, and F.G. Caballero: Acta Mater., 2017, vol. 125, pp. 359–68.10.1016/j.actamat.2016.12.013 ↗
41. [41] V.I. Savran, S.E. Offerman, and J. Sietsma: Metall. Mater. Trans. A, 2010, vol. 41, pp. 583–91.10.1007/s11661-009-0142-5 ↗
42. [42] G.S. Huppi, D.K. Matlock, and G. Krauss: Scr. Metall., 1980, vol. 14, pp. 1239–43.10.1016/0036-9748(80)90264-1 ↗
43. [43] G.P. Krielaart and S. Van Der Zwaag: Mater. Sci. Technol., 1998, vol. 14, pp. 10–8.10.1179/mst.1998.14.1.10 ↗
44. [44] F. Fazeli and M. Militzer: Metall. Mater. Trans. A, 2005, vol. 36, pp. 1395–405.10.1007/s11661-005-0232-y ↗
45. [45] J.R. Bradley and H.I. Aaronson: Metall. Trans. A, 1977, vol. 8, pp. 317–22.10.1007/BF02661646 ↗
46. [46] C. Capdevila, F.G. Caballero, and C.G. de Andrés: ISIJ Int., 2002, vol. 42, pp. 894–902.10.2355/isijinternational.42.894 ↗
47. [47] L. Cheng, C.M. Brakman, B.M. Korevaar, and E.J. Mittemeijer: Metall. Trans. A, 1988, vol. 19, pp. 2415–26.10.1007/BF02645469 ↗
48. [48] T. Waterschoot, K. Verbeken, and B.C. De Cooman: ISIJ Int., 2006, vol. 46, pp. 138–46.10.2355/isijinternational.46.138 ↗
49. [49] D. Isheim, A.H. Hunter, X.J. Zhang, and D.N. Seidman: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3046–59.10.1007/s11661-013-1670-6 ↗
50. [50] D. Jain, D. Isheim, X.J. Zhang, G. Ghosh, and D.N. Seidman: Metall. Mater. Trans. A, 2017, vol. 48, pp. 3642–54.10.1007/s11661-017-4146-2 ↗
51. [51] K. Thompson, P.L. Flaitz, P. Ronsheim, D.J. Larson, and T.F. Kelly: Science, 2007, vol. 317, pp. 1370–74.10.1126/science.1145428 ↗
52. [52] A. Kwiatkowski da Silva, G. Leyson, M. Kuzmina, D. Ponge, M. Herbig, S. Sandlöbes, B. Gault, J. Neugebauer, and D. Raabe: Acta Mater., 2017, vol. 124, pp. 305–15.10.1016/j.actamat.2016.11.013 ↗