Feasibility Study of Making Metallic Hybrid Materials Using Additive Manufacturing
Source abstract
Abstract
A metallic hybrid structure, consisting of an Inconel-718 matrix and a Co-Cr internal structure, was successfully manufactured using laser direct energy deposition process. Characterizations were performed using energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), neutron-computed tomography (nCT), and electron back-scatter diffraction (EBSD) to verify the interfaces between Co-rich and Ni-rich phases. nCT revealed the internal structures to be continuous without cracking or significant intermixing due to inter-diffusion of Co and Ni (i.e., dissolved boundaries between the two structures). Minor porosity was detected. EBSD confirmed a good bond at the granular level. No precipitate phases were detected with XRD. EDS revealed dilution/intermixing between the Co and Ni interfaces presumably due to melt-pool overlay between the matrix and the internal structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. M.F. Ashby, Philos. Mag., 2005, vol.85, pp.3235-3257.10.1080/14786430500079892 ↗
2. B.E. Carroll, R.A. Otis, J.P. Borgonia, J.O. Suh, R.P. Dillon, A.A. Shapiro, D.C. Hofmann, Z.K. Liu, A.M. Beese, Acta Mater., 2016, vol.108, pp.46-54.10.1016/j.actamat.2016.02.019 ↗
3. D. Gu, Y.C. Hagedorn, W. Meiners, K. Wissenbach, R. Poprawe, Surf. Coat. Tech., 2011, vol.205, pp.3285-3292.10.1016/j.surfcoat.2010.11.051 ↗
4. Y. Xiong, J.E. Smugeresky, L. Ajdelsztajn, J.M. Schoenung, Mat. Sci. Eng. A-Struct., 2008, vol.493, pp.261-266.10.1016/j.msea.2007.05.125 ↗
5. R. Banerjee, P.C. Collins, H.L. Fraser, Adv. Eng. Mater., 2002, vol.4, pp.847-851.10.1002/1527-2648(20021105)4:11<847::AID-ADEM847>3.0.CO;2-C ↗
6. E. Cakmak, M.M. Kirka, T.R. Watkins, R.C. Cooper, K. An, H. Choo, W. Wu, R.R. Dehoff, S.S. Babu, Acta Mater., 2016, vol.108, pp.161-175.10.1016/j.actamat.2016.02.005 ↗
7. E. Cakmak, T.R. Watkins, J.R. Bunn, R.C. Cooper, P.A. Cornwell, Y. Wang, L.M. Sochalski-Kolbus, R.R. Dehoff, S.S. Babu, Metall. Mater. Trans. A, 2016, vol.47, pp.971-980.10.1007/s11661-015-3186-8 ↗
8. R. Oruganti, A. Ghosh, Metall. Mater. Trans. A, 2003, vol.34, pp.2643-2653.10.1007/s11661-003-0023-2 ↗
9. A. Gåård, P. Krakhmalev, J. Bergström, J. Alloy. Compd., 2006, vol.421, pp.166-171.10.1016/j.jallcom.2005.09.084 ↗
10. X. Wang, T. Laoui, J. Bonse, J.P. Kruth, B. Lauwers, L. Froyen, Int. J. Adv. Manuf. Tech., 2002, vol.19, pp.351-357.10.1007/s001700200024 ↗
11. K.I. Schwendner, R. Banerjee, P.C. Collins, C.A. Brice, H.L. Fraser, Scripta Mater., 2001, vol.45, pp.1123-1129.10.1016/S1359-6462(01)01107-1 ↗
12. R. Banerjee, A. Genc, D. Hill, P. Collins, H. Fraser, Scripta Mater., 2005, vol.53, pp.1433-1437.10.1016/j.scriptamat.2005.08.014 ↗
13. A. Simchi, D. Godlinski, Scripta Mater., 2008, vol.59, pp.199-202.10.1016/j.scriptamat.2008.03.007 ↗
14. B. Zheng, T. Topping, J.E. Smugeresky, Y. Zhou, A. Biswas, D. Baker, E.J. Lavernia, Metall. Mater. Trans. A, 2010, vol.41, pp.568-573.10.1007/s11661-009-0126-5 ↗
15. G. Martin, D. Fabrègue, F. Mercier, J.A. Chafino-Aixa, R. Dendievel, J.J. Blandin, Scripta Mater., 2016, vol.122, pp.5-9.10.1016/j.scriptamat.2016.05.001 ↗
16. A.E. Pawlowski, Z.C. Cordero, M.R. French, T.R. Muth, J.K. Carver, R.B. Dinwiddie, A.M. Elliott, A. Shyam, D.A. Splitter, Mater. Design, 2017, vol.127, pp.346-351.10.1016/j.matdes.2017.04.072 ↗
17. N. Sridharan, E. Cakmak, B. Jordan, D. Leonard, W. Peter, R. Dehoff, D. Gandy, S. Babu, Weld. J., 2017, vol.96, pp.295S-306S.
18. K.H. Shin, H. Natu, D. Dutta, J. Mazumder, Mater. Design, 2003, vol.24, pp.339-353.10.1016/S0261-3069(03)00060-8 ↗
19. P. Collins, R. Banerjee, S. Banerjee, H. Fraser, Mat. Sci. Eng. A-Struct., 2003, vol. 352, pp.118-128.10.1016/S0921-5093(02)00909-7 ↗
20. L. Santodonato, H. Bilheux, B. Bailey, J. Bilheux, P. Nguyen, A. Tremsin, D. Selby, L. Walker, Physcs. Proc., 2015, vol.69, pp.104-108.10.1016/j.phpro.2015.07.015 ↗
21. L. Crow, L. Robertson, H. Bilheux, M. Fleenor, E. Iverson, X. Tong, D. Stoica, W. Lee, Nucl. Instrum. Meth. A, 2011, vol.634, pp.S71-S74.10.1016/j.nima.2010.06.213 ↗
22. A. Myagotin, A. Voropaev, L. Helfen, D. Hanschke, T. Baumbach, IEEE T. Image Process., 2013, vol.22, pp.5348-5361.10.1109/TIP.2013.2285600 ↗
23. F. Xu, L. Helfen, T. Baumbach, H. Suhonen, Opt. Express, 2012, vol.20, pp.794-806.10.1364/OE.20.000794 ↗
24. Z. Yu, J.B. Thibault, C.A. Bouman, K.D. Sauer, J. Hsieh, IEEE T. Image Process., 2011, vol.20, pp.161-175.10.1109/TIP.2010.2058811 ↗
25. S.V. Venkatakrishnan, L.F. Drummy, M.A. Jackson, M. De Graef, J. Simmons, C.A. Bouman, IEEE T. Image Process., 2013, vol.22, pp.4532-4544.10.1109/TIP.2013.2277784 ↗