Precipitate Phase Evolution in a 11Cr Ferritic/Martensitic Steel During Tempering
Source abstract
Abstract
The precipitate phases of a 11Cr F/M steel normalized at 1323 K (1050 °C) for 0.5 h and tempered for 1.5 h at temperatures ranging from 573 K to 1053 K (300 °C to 780 °C) were investigated using transmission electron microscopy and energy-dispersive X-ray spectroscopy. In the normalized condition, Fe-rich M3C, Fe-rich M7C3, and large MC carbides were identified in the steel. In the relatively low tempering temperature ranging from 573 K to 773 K (300 °C to 500 °C), Fe-rich M2C, Fe-rich M3C, and large-sized Nb-rich MC carbides were observed in the steel. In the high tempering temperature ranging from 873 K to 1053 K (600 °C to 780 °C), Cr-rich M2C, Cr-rich M3C2, Cr-rich M23C6, and Fe-rich M5C2 carbides and MX particles including Nb-rich, Ta-Nb-rich, and V-rich MC carbides were detected in steel besides large MX particles. The process of precipitate phase evolution in the steel during tempering is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. F. Abe, T. Noda, H. Araki, and M. Okada: J. Nucl. Sci. Technol., 1994, vol. 31, pp. 279–92.10.1080/18811248.1994.9735152 ↗
2. R.L. Klueh and D.R. Harries: High-Chromium Ferritic and Martensitic Steels for Nuclear Applications, ASTM, West Conshohocken, PA, 2001, pp. 5–27.10.1520/MONO3-EB ↗
3. R.L. Klueh and A.T. Nelson: J. Nucl. Mater., 2007, vol. 371, pp. 37–52.10.1016/j.jnucmat.2007.05.005 ↗
4. P. Yvon and F. Carré: J. Nucl. Mater., 2009, vol. 385, pp. 217–22.10.1016/j.jnucmat.2008.11.026 ↗
5. F. Abe: Sci. Technol. Adv. Mater., 2008, vol. 9, art. no. 013002.
6. Y. Shen, H. Liu, Z. Shang, and Z. Xu: J. Nucl. Mater., 2015, vol. 465, pp. 373–82.10.1016/j.jnucmat.2015.05.043 ↗
7. J. Hald and Z. Kuboñ (1997) Microstructural Development and Stability in High Chromium Ferritic Power Plant Steels, In: A. Strang and D.J. Gooch (eds). The Institute of Materials, London, pp. 159–76.
8. I. Fedorova, A.Kostka, E.Tkachev, A.Belyakov, and R.Kaibyshev: Mater. Sci. Eng. A, 2016, vol. 662, pp. 443–55.10.1016/j.msea.2016.03.092 ↗
9. C. Hurtado-Noreña, C. A. Danon, M. Luppo, and P. Bruzzoni: Metall. Mater. Trans. A, 2015, vol. 46, pp. 3972–88.10.1007/s11661-015-3045-7 ↗
10. N. Dudova and R. Kaibyshev: ISIJ Int., 2011, vol. 51, pp.826–31.10.2355/isijinternational.51.826 ↗
11. A. Yu. Kipelova, A. N. Belyakov, V. N. Skorobogatykh, I. A. Shchenkova, and R. O. Kaibyshev: Met. Sci. Heat Treat., 2010, vol. 52, pp.100–10.10.1007/s11041-010-9240-7 ↗
12. W.B. Jones, C.R. Hills, and D.H. Polonis: Metall. Trans. A, 1991, vol. 22, pp. 1049–58.10.1007/BF02661098 ↗
13. X. G. Tao, L. Z. Han, and J. F Gu: Mater. Sci. Eng. A, 2014, vol. 618, pp. 189–204.10.1016/j.msea.2014.09.009 ↗
14. Y.Z. Shen, S.H. Kim, H.D. Cho, C.H. Han, and W.S. Ryu: J. Nucl. Mater., 2010, vol. 400, pp.94–102.10.1016/j.jnucmat.2010.02.016 ↗
15. A. Mandal and T. K. Bandyopadhay: Mater. Sci. Eng. A, 2015, vol. 620, pp. 463–70.10.1016/j.msea.2014.10.043 ↗
16. A. Kr Metya, M. Ghosh, N. Parida, and K. Balasubramaniam: Mater. Charact., 2015, vol. 107, pp. 14–22.10.1016/j.matchar.2015.06.036 ↗
17. Y.Z. Shen, S.H. Kim, H.D. Cho, C.H. Han, and W.S. Ryu: Nucl. Eng. Des., 2009, vol. 239, pp. 648–54.10.1016/j.nucengdes.2008.12.018 ↗
18. J.M. Vitek and R. L. Klueh: Metall. Trans. A, 1983, vol. 14, pp. 1047–55.10.1007/BF02670443 ↗
19. Y.Z. Shen, B. Ji, X.L. Zhou, and J. Zhu: Metall. Mater. Trans. A, 2014, vol. 45, pp. 2950–62.10.1007/s11661-014-2238-9 ↗
20. F. Masuyama (1999) New developments in steels for power generation boilers, R. Viswanathan and J. Nutting, (eds). The Institute of Materials, London, pp. 33–48
21. Y. Hirotsu and S. Nagakura: Acta Metall., 1972, vol. 20, pp. 645–55.10.1016/0001-6160(72)90020-X ↗
22. Y. Hirotsu and S. Nagakura: Trans. JIM, 1974, vol. 15, pp. 129–34.10.2320/matertrans1960.15.129 ↗
23. M. Manes, A.D. Damick, M. Mentser, E.M. Cohn, and L.J.E. Hofer: J. Am. Chem. Soc., 1952, vol. 74, pp. 6207–09.10.1021/ja01144a015 ↗
24. H. Djebaili, H. Zedira, A. Djelloul, and A. Boumaza: Mater. Charact., 2009, vol. 60, pp. 946–952.10.1016/j.matchar.2009.03.007 ↗
25. M. Vijayalakshmi and B. Raj: Phase evolution diagrams: a new approach to mean metal temperature of ferritic components, Universities Press, Hyderabad, 2006, pp. 25–91.
26. G. J. Cai, H. O. Andren, and F. L. E. Svensson: Mater. Sci. Eng. A, 1998, vol. 242, pp. 202–09.10.1016/S0921-5093(97)00507-8 ↗
27. H. Chi, D. Ma, H. Xu, W. Zhu, and J. Jiang: J. Iron Steel Res. Int., 2016, vol. 23, pp. 484–88.10.1016/S1006-706X(16)30076-0 ↗
28. X. Zhou, Y. Shen, and Z. Xu: Acta Metall. Sin., 2015, vol. 28, pp. 48–57.10.1007/s40195-014-0166-8 ↗
29. Y. Shen, X. Zhou, T. Shi, X. Huang, Z. Shang, W. Liu, B. Ji and Z. Xu: Mater. Charact., 2016, vol. 122, pp. 113-23.10.1016/j.matchar.2016.10.031 ↗
30. R. V. Yakovenko, V. A. Maslyuk, A. N. Gripachevskii, and V. B. Deimontovich: Powder Metall. Met. Ceram., 2011, vol. 50, pp. 182–88.10.1007/s11106-011-9316-y ↗