A New Venue Toward Predicting the Role of Hydrogen Embrittlement on Metallic Materials
Source abstract
Abstract
This paper presents a new crystal plasticity formulation to predict the role of hydrogen embrittlement on the mechanical behavior of metallic materials. Specifically, a series of experiments were carried out to monitor the role of hydrogen interstitial content on the uniaxial tensile deformation response of iron alloyed with hydrogen, and the classical Voce hardening scheme was modified to account for the shear stresses imposed on arrested dislocations due to the surrounding hydrogen interstitials. The proposed set of physically grounded crystal plasticity formulations successfully predicted the deformation response of iron in the presence of different degrees of hydrogen embrittlement. Moreover, the combined experimental and modeling effort presented herein opens a new venue for predicting the alterations in the performance of metallic materials, where the hydrogen embrittlement is unavoidable.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. S. Wang, N. Hashimoto, Y. Wang, and S. Ohnuki: Acta Mater., 2013, vol. 61, pp. 4734–42.10.1016/j.actamat.2013.05.007 ↗
2. H. Kotake, R. Matsumoto, S. Taketomi, and N. Miyazaki: Int. J. Press. Vessel. Pip., 2008, vol. 85, pp. 540–49.10.1016/j.ijpvp.2008.02.002 ↗
3. M. Stashchuk and M. Dorosh: Int. J. Hydrogen Energy, 2012, vol. 37, pp. 14687–96.10.1016/j.ijhydene.2012.07.093 ↗
4. R.A. Siddiqui and H.A. Abdullah: J. Mater. Process. Technol., 2005, vol. 170, pp. 430–35.10.1016/j.jmatprotec.2005.05.024 ↗
5. T. Kanezaki, C. Narazaki, Y. Mine, S. Matsuoka, and Y. Murakami: Int. J. Hydrogen Energy, 2008, vol. 33, pp. 2604–19.10.1016/j.ijhydene.2008.02.067 ↗
6. S. Jothi, T.N. Croft, and S.G.R. Brown: Int. J. Hydrogen Energy, 2014, vol. 39, pp. 20671–88.10.1016/j.ijhydene.2014.07.020 ↗
7. M. B. Djukic, V. Sijacki Zeravcic, G. Bakic, A. Sedmak, and B. Rajicic: Procedia Mater. Sci., 2014, vol. 3, pp. 1167–72. DOI:10.1016/j.mspro.2014.06.190.10.1016/j.mspro.2014.06.190 ↗
8. W.H. Johnson: Proc R Soc L., 1875, vol. 23, pp. 168–79.10.1098/rspl.1874.0024 ↗
9. G.P. Tiwari, A. Bose, J.K. Chakravartty, S. L. Wadekar, and M. K. Totlani: 2000, vol. 286, pp. 269–81.
10. H. Kimura, H. Matsui: Scr. Metall., 1987, vol. 21, pp. 319–24.10.1016/0036-9748(87)90221-3 ↗
11. W.Ko, J. Bae, J. Shim, and B. Lee: Int. J. Hydrogen Energy, 2012, vol. 37, pp. 13583–93.10.1016/j.ijhydene.2012.06.075 ↗
12. A. Toshimitsu Yokobori, T. Uesugi, M. Sendoh, and M. Shibata: Strength Fract. Complex. 1, 2003, vol. 1, pp. 187–204.
13. I.M. Dmytrakh, O.D. Smiyan, A.M. Syrotyuk, and O.L. Bilyy: Int. J. Fatigue, 2013, vol. 50, pp. 26–32.10.1016/j.ijfatigue.2012.05.017 ↗
14. Y. Mine, C. Narazaki, K. Murakami,S. Matsuokai, and Y. Murakami: Int. J. Hydrogen Energy, 2009, vol. 34, pp. 1097–1107.10.1016/j.ijhydene.2008.11.018 ↗
15. J.A. Clum: Scr. Metall., 1975, vol. 9, pp. 51–58.10.1016/0036-9748(75)90145-3 ↗
16. K.A. Nibur, D.F. Bahr, and B.P. Somerday: Acta Mater., 2006, vol. 54, pp. 2677–84.10.1016/j.actamat.2006.02.007 ↗
17. P.J. Ferreira, I.M. Robertson, and H.K. Birnbaum: Acta Mater., 1999, vol. 47, pp. 2991–98.10.1016/S1359-6454(99)00156-1 ↗
18. J.R Rice: J. Mater. Sci., 1992, vol. 40, pp. 239–71.10.1016/S0022-5096(05)80012-2 ↗
19. A. Turnbull: Corros. Sci., 1993, vol. 34, pp. 921–60.10.1016/0010-938X(93)90072-O ↗
20. C.A. Zapffe: J Iron Steel Inst, 1946, vol. 154, pp. 123–31.
21. A.S. Tetelman and W.D. Robertson: Trans Met. Soc AIME, 1962, vol. 224, pp. 775–83.
22. N.J. Petch and P. Stables: Nature, 1952, vol. 169, pp. 842–43.10.1038/169842a0 ↗
23. R. Thompson: J. Mater. Sci., 1978, vol. 13, pp. 128–42.10.1007/BF00739283 ↗
24. D. Shih, I.M. Robertson, and H.K. Birnbaum: Acta Metall., 1988, vol. 36, pp. 111–24.10.1016/0001-6160(88)90032-6 ↗
25. S. Gahr, M.L. Grossbeck, and H.K. Birnbaum: Acta Metall. Mater., 1977, vol. 25, pp. 125–34.10.1016/0001-6160(77)90116-X ↗
26. A.R. Troiano: Trans. ASM, 1960, vol. 52, pp. 54–80.
27. R.A. Oriani and P.H. Josephic: Acta Metall., 1974, vol. 22, pp. 1065–74.10.1016/0001-6160(74)90061-3 ↗
28. H.K. Birnbaum: Scr. Metall., 1994, vol. 31, pp. 149–53.10.1016/0956-716X(94)90166-X ↗
29. P. Sofronis and H.K. Birnbaum: J Mech Phys Solids, 1995, vol. 43, pp. 49–90.10.1016/0022-5096(94)00056-B ↗
30. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A, 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
31. T. Tabata and H.K. Birnbaum: Scr. Metall., 1983, vol. 17, pp. 947–50.10.1016/0036-9748(83)90268-5 ↗
32. J. Lufrano, P. Sofronis, and H.K. Birnbaum: J Mech Phys Solids, 1996, vol. 44, pp. 179–205.10.1016/0022-5096(95)00075-5 ↗
33. W. Qin, J. A. Szpunar, and J. Kozinski: Acta Mater., 2012, vol. 60, pp. 4845–55.10.1016/j.actamat.2012.06.003 ↗
34. D. Delafosse and T. Magnin: Eng. Fract. Mech., 2001, vol. 68, pp. 693–729.10.1016/S0013-7944(00)00121-1 ↗
35. A.G. Varias and A.R. Massih: J. Mech. Phys. Solids, 2002, vol. 50, pp. 1469–1510.10.1016/S0022-5096(01)00117-X ↗
36. R.A. Oriani and P.H. Josephic: Acta Metall., 1977, vol. 25, pp. 979–88.10.1016/0001-6160(77)90126-2 ↗
37. E.A. Steigerwald, F.W. Schaller, and A.R. Troiano: Trans Met. Soc AIME, 1960, vol. 218, pp. 832–41.
38. A. Taha and P. Sofronis: Eng. Fract. Mech., 2001, vol. 68, pp. 803–37.10.1016/S0013-7944(00)00126-0 ↗
39. P. Sofronis, Y. Liang, and N. Aravas: Eur. J. Mech. - A/Solids, 2001, vol. 20, pp. 857–72.10.1016/S0997-7538(01)01179-2 ↗
40. I.M. Robertson and H.K. Birnbaum: Acta Mater., 1986, vol. 34, pp. 353–66.10.1016/0001-6160(86)90071-4 ↗
41. J. Toribio, V. Kharin, M. Lorenzo, and D. Vergara: Corros. Sci., 2011, vol. 53, pp. 3346–55.10.1016/j.corsci.2011.06.012 ↗
42. T. Doshida and K. Takai: Acta Mater., 2014, vol. 79, pp. 93–107.10.1016/j.actamat.2014.07.008 ↗
43. T. Michler and J. Naumann: Int. J. Hydrogen Energy, 2008, vol. 33, pp. 2111–22.10.1016/j.ijhydene.2008.02.021 ↗
44. T. Dieudonné, L. Marchetti, M. Wery, J. Chêne, C. Allely, P. Cugy, and C.P. Scott:5Corros. Sci., 2014, vol. 82, pp. 218–26.10.1016/j.corsci.2014.01.022 ↗
45. C. Borchers, T. Michler, and A. Pundt: Adv Eng Mater, 2008, vol. 10, pp. 11–23.10.1002/adem.200700252 ↗
46. A.R. Troiano: in Am. Soc. Met., 1973, pp. 3–15.
47. F. Galliano, E. Andrieu, C. Blanc, J. Cloue, D. Connetable, and G. Odemer: Mater. Sci. Eng. A, 2014, vol. 611, pp. 370–82.10.1016/j.msea.2014.06.015 ↗
48. D.F. Teter, I.M. Robertson, and H.K. Birnbaum: 2001, vol. 49, pp. 4313–23.10.1016/S1359-6454(01)00301-9 ↗
49. W.W. Gerberich, D.D. Stauffer, and P. Sofronis: in Int. Hydrog. Conf. - Eff. Hydrog. Mater., 2009, pp. 38–45.
50. Y. Chen, X. Wan, F. Li, Q. Wang, and Y. Liu: Mater. Sci. Eng. A, 2007, vol. 466, pp. 156–59.10.1016/j.msea.2007.02.081 ↗
51. T. Boniszewski and G.C. Smith: Acta Metall. Mater., 1963, vol. 11, pp. 165–78.10.1016/0001-6160(63)90209-8 ↗
52. J.W. Watson, Y.Z. Shen, and M. Meshii: Metall. Mater. Trans. A, 1988, vol. 19, pp. 2299–2304.10.1007/BF02645053 ↗
53. O. Takakuwa, Y. Mano, and H. Soyama: Int. J. Hydrogen Energy, 2014, vol. 39, pp. 6095–6103.10.1016/j.ijhydene.2014.01.190 ↗
54. R.A. Oriani: Acta Metall., 1970, vol. 18, pp. 147–57.10.1016/0001-6160(70)90078-7 ↗
55. D.C. Ahn, P. Sofronis, and R. Dodds: Int. J. Fract., 2007, vol. 145, pp. 135–57.10.1007/s10704-007-9112-3 ↗
56. A. Krom, A.H.M. Koers, R.W.J. Bakker: J. Mech. Phys. Solids, 1999, vol. 47, pp. 971–92.10.1016/S0022-5096(98)00064-7 ↗
57. S. Taketomi, R. Matsumoto, and N. Miyazaki: Int. J. Mech. Sci., 2010, vol. 52, pp. 334–38.10.1016/j.ijmecsci.2009.09.042 ↗
58. J. Lufrano and P. Sofronis: Acta Mater., 1998, vol. 46, pp. 1519–26.10.1016/S1359-6454(97)00364-9 ↗
59. B. Strnadel: Eng. Fract. Mech., 1998, vol. 61, pp. 299–310.10.1016/S0013-7944(98)00073-3 ↗
60. P. Sofronis and H.K. Birnbaum: J Mech Phys Solids, 1995, vol. 43, pp. 49–90.10.1016/0022-5096(94)00056-B ↗
61. Y. Liang, P. Sofronis, and R.H. Dodds: Mater. Sci. Eng. A, 2004, vol. 366, pp. 397–411.10.1016/j.msea.2003.09.052 ↗
62. J.C. Sobotka, R.H. Dodds, and P. Sofronis: Int. J. Solids Struct., 2009, vol. 46, pp. 4095–4106.10.1016/j.ijsolstr.2009.08.002 ↗
63. R. Miresmaeili, M. Ogino, T. Nakagawa, and H. Kanayama: Int. J. Hydrogen Energy, 2010, vol. 35, pp. 1506–14.10.1016/j.ijhydene.2009.11.024 ↗
64. X. Yu, F. Gou, B. Li, and Ni Zhang: Fusion Eng. Des., 2014, vol. 89, pp. 1096–1100.10.1016/j.fusengdes.2013.12.007 ↗
65. C.V.D. Leo and L. Anand: Int. J. Plast., 2013, vol. 43, pp. 42–69.10.1016/j.ijplas.2012.11.005 ↗
66. A. van den Beukel: Phys. Status Solidi., 1975, vol. 30, pp. 197–206.10.1002/pssa.2210300120 ↗
67. M.A. Soare and W.A. Curtin: Acta Mater., 2008, vol. 56, pp. 4091–4101.10.1016/j.actamat.2008.04.030 ↗
68. Y. Estrin and P.G. McCormick: Acta Metall. Mater., 1991, vol. 39, pp. 2977–83.10.1016/0956-7151(91)90030-5 ↗
69. N. Anjabin, A.K. Taheri, and H.S. Kim: Mater. Sci. Eng. A, 2013, vol. 585, pp. 165–73.10.1016/j.msea.2013.07.038 ↗
70. P.G. McCormick: Acta Metall., 1988, vol. 36, pp. 3061–67.10.1016/0001-6160(88)90043-0 ↗
71. J.P. Hirth and B. Carnahan: Acta Metall., 1978, vol. 26, pp. 1795–1803.10.1016/0001-6160(78)90092-5 ↗
72. M.C. Uslu and D. Canadinc: J. Mater. Sci., 2010, vol. 45, pp. 1683–87.10.1007/s10853-009-4157-5 ↗
73. A.H. Cottrell and M.A. Jaswon: Proc. Phys. Cos. L. A, 1949, vol. 199, pp. 104–14.
74. J.D. Eshelby: Proc R Soc L. A, 1957, vol. 241, pp. 376–96.10.1098/rspa.1957.0133 ↗
75. F.M. Mazzolai and H.K. Birnbaum: J. Phys. F Met. Phys, 1985, vol. 15, pp. 507–23.10.1088/0305-4608/15/3/008 ↗
76. J. Lufrano and P. Sofronis: Int. J. Solids Struct., 1996, vol. 33, pp. 1709–23.10.1016/0020-7683(95)00119-0 ↗
77. F. Springer and C. Schwink: Scr. Metall., 1995, vol. 32, pp. 1771–76.10.1016/0956-716X(95)00003-E ↗
78. C. Fressengeas, A. J. Beaudoin, M. Lebyodkin, L.P. Kubin, and Y. Estrin: Mater. Sci.Eng. A, 2005, vol. 400-401, pp. 226–30.10.1016/j.msea.2005.02.073 ↗
79. J.L. Chaboche, A. Gaubert, P. Kanouté, A. Longuet, F. Azzouz, and M. Mazière: Int. J. Plast., 2013, vol. 46, pp. 1–22.10.1016/j.ijplas.2012.09.011 ↗
80. M.A. Soare and W.A. Curtin: Acta Mater., 2008, vol. 56, pp. 4046–61.10.1016/j.actamat.2008.04.027 ↗
81. S. Narayanan, D.L. McDowell, and T. Zhu: J. Mech. Phys. Solids, 2014, vol. 65, pp. 54–68.10.1016/j.jmps.2014.01.004 ↗
82. H. Peter: Mater. Sci. Eng. A, 1996, vol. 207, pp. 208–15.10.1016/0921-5093(95)10033-4 ↗
83. C.J. Bayley, W.A.M. Brekelmans, and M.G.D. Geers: Int. J. Solids Struct., 2006,vol. 43, pp. 7268–86.10.1016/j.ijsolstr.2006.05.011 ↗
84. B.Bal, B. Gumus and D. Canadinc: J. Eng. Mater. Technol., 2016, vol. 183(3), pp. 031012–031012-8
85. N. Naveen Kumar, R. Tewari, P.V. Durgaprasad, B.K. Dutta, and G.K. Dey: Comput. Mater. Sci., 2013, vol. 77, pp. 260–63.10.1016/j.commatsci.2013.04.048 ↗
86. A. Dilwar, M. Nasreen, and M.Z. Butt: J. Mater. Sci., 2011, vol. 46, pp. 3812–21.10.1007/s10853-011-5295-0 ↗
87. A. Argon: Strengthening Mechanisms in Crystal Plasticity. Oxford University Press, 2008.10.1093/acprof:oso/9780198516002.001.0001 ↗
88. R. Gröger, V. Racherla, J. Basani, and V. Vitek: Acta Mater., 2008, vol. 56, pp. 5412–25.10.1016/j.actamat.2008.07.037 ↗
89. A. Latapie and D. Farkas: Model. Simul. Mater. Sci. Eng, 2003, vol. 11, pp. 745–53.10.1088/0965-0393/11/5/303 ↗
90. V. Shastry and D. Farkas: Model. Simul. Mater. Sci. Eng, 1996, vol. 4, pp. 473–92.10.1088/0965-0393/4/5/004 ↗
91. S. Naamane, G. Monnet, and B. Devincre: Int. J. Plast., 2010, vol. 26, pp. 84–92.10.1016/j.ijplas.2009.05.003 ↗
92. F. Roters, P. Eisenlohr, L. Hantcherli, D.D. Tjahjanto, T.R. Bieler, and D Raabe: Acta Mater., 2010, vol. 58, pp. 1152–1211.10.1016/j.actamat.2009.10.058 ↗
93. J. Friedel: Dislocations, 1964.10.1016/B978-0-08-013523-6.50011-9 ↗
94. K. Kang, J. Yin, and W. Cai: J. Mech. Phys. Solids, 2014, vol. 62, pp. 181–93.10.1016/j.jmps.2013.09.023 ↗
95. F. Springer, A. Nortmann, and C. Schwing: Phys Status Solidi A, 1998, vol. 170, pp. 63–81.10.1002/(SICI)1521-396X(199811)170:1<63::AID-PSSA63>3.0.CO;2-F ↗
96. U.F. Kocks, A.S. Argon, and M.F. Ashby: Prog.Mater.Sci, 1975, vol. 19, pp. 1–281.10.1016/0079-6425(75)90005-5 ↗
97. K. Aenne, M. Anxin, and H. Alexander: Acta Mater., 2012, vol. 60, pp. 3894–3901.10.1016/j.actamat.2012.03.053 ↗
98. C.R. Weinberger, C.C. Battaile, T.E. Buchheit, and E.A. Holm: Int. J. Plast., 2012, vol. 37, pp. 16–30.10.1016/j.ijplas.2012.03.012 ↗
99. H.Jörn: Int. J. Plast., 1999, vol. 15, pp. 605–24.10.1016/S0749-6419(99)00002-9 ↗
100. S.Y Yang and W. Tong: Mater. Sci. Eng. A, 2001, vol. 309-310, pp. 300–303.10.1016/S0921-5093(00)01675-0 ↗