Isothermal Reduction of Oxide Scale on Hot-Rolled, Low-Carbon Steel in 10 pct H2-Ar
Source abstract
Abstract
The isothermal reduction of oxide scale on hot-rolled, low-carbon steel strip in 10 pct H2-Ar mixtures in the temperature range of 673 K to 1073 K (400 °C to 800 °C) was investigated by using a thermo-gravimetric analyzer (TGA). During heating under an argon atmosphere, magnetite/iron eutectoid and proeutectoid magnetite in the oxide scale successively transformed into wustite at a temperature above 843 K (570 °C). The kinetic plot of the isothermal reduction assumes a sigmoid shape, including induction, acceleration, and finally the decaying stage. Fitting the kinetic curve to mathematical models, the reaction at 1073 K (800 °C) and 773 K (500 °C) were determined to be controlled by phase-boundary-controlled reaction and three-dimensional growth of nuclei, respectively. The reduction product varies with temperature and itself affects the kinetics. Porous and dense iron were, respectively, obtained below and above 873 K (600 °C). A “rate-minimum” was observed at 973 K (700 °C) due to the formation of dense iron that blocks the gas diffusion. Due to the structural transformation of oxide scale during heating, the reactant depends on the heating process. However, compared with the oxide scale structure, the temperature is more important in determining the reduction kinetics at temperatures above 973 K (700 °C).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Iron and Steelmaking Processes · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. 1. K. Voges, A. Mueth, and B. Lehane: Iron Steel Technol., 2008, vol. 5, pp. 81-96.
2. 2. L.V. Blgdandy and H.J. Engell: The Reduction of Iron Ores: Scientific Basis and Technology, Springer-Verlag, Berlin Heidelberg, 1971, pp. 47-100.10.1007/978-3-662-10400-2 ↗
3. 3. M.F. Rau, D. Rieck, and J.W. Evans: Metall. Mater. Trans. B, 1987, vol. 18B, pp. 257-78.10.1007/BF02658451 ↗
4. 4. P.C. Hayes: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 19-34.10.1007/s11663-009-9301-8 ↗
5. 5. P.C. Hayes: Steel Res. Int., 2011, vol. 82, pp. 480-93.10.1002/srin.201100032 ↗
6. 6. Y.K. Rao: Metall. Mater. Trans. B, 1979, vol. 10B, pp. 243-55.10.1007/BF02652469 ↗
7. 7. D.H. St. John and P.C. Hayes: Metall. Mater. Trans. B, 1982, vol. 13B, pp. 117-24.10.1007/BF02666962 ↗
8. 8. S.P. Matthew and P.C. Hayes: Metall. Mater. Trans. B, 1990, vol. 21B, pp. 153-72.10.1007/BF02658127 ↗
9. 9. S.P. Matthew, T.R. Cho, and P.C. Hayes: Metall. Mater. Trans. B, 1990, vol. 21B, pp. 733-41.10.1007/BF02654252 ↗
10. 10. D.H. St. John, S.P. Matthew, and P.C. Hayes: Metall. Mater. Trans. B, 1984, vol. 15B, pp. 709-17.10.1007/BF02657293 ↗
11. 11. R. Nicolle and A. Rist: Metall. Mater. Trans. B, 1979, vol. 10B, pp. 429-38.10.1007/BF02652516 ↗
12. 12. H. Wang and H.Y. Sohn: ISIJ Int., 2011, vol. 51, pp. 906-12.10.2355/isijinternational.51.906 ↗
13. 13. M.C. Bagatini, V. Zymla, E. Osorio, and A.C.F. Vilela: ISIJ Int., 2011, vol. 51, pp. 1072-9.10.2355/isijinternational.51.1072 ↗
14. 14. M. Moukassi, P. Steinmetz, B. Dupre, and C. Gleitzer: Metall. Mater. Trans. B, 1983, vol. 14B, pp. 125-32.10.1007/BF02670879 ↗
15. 15. A. Primavera, S. Cattarino, and M. Pavlicevic: Ironmaker Steelmaker, 2007, vol. 34, pp. 290-4.10.1179/174328107X168048 ↗
16. 16. M. Bahgat, Y. Sasaki, S. Hijino, M. Iguchi, and K. Ishii: ISIJ Int., 2004, vol. 44, pp. 2023-8.10.2355/isijinternational.44.2023 ↗
17. 17. M. Bahgat, Y. Sasaki, S. Hijino, M. Iguchi, and K. Ishii: ISIJ Int., 2005, vol. 45, pp. 657-61.10.2355/isijinternational.45.657 ↗
18. 18. Y. Sasaki, M. Bahgat, M. Iguchi, and K. Ishii: ISIJ Int., 2005, vol. 45, pp. 1077-83.10.2355/isijinternational.45.1077 ↗
19. 19. I. Saeki, T. Ikeda, K. Ohno, T. Sato, and S. Kurosawa: Tetsu-to-Hagane, 2011, vol. 97, pp. 12-8.10.2355/tetsutohagane.97.12 ↗
20. 20. R. Hudson: Met. Finish., 1985, vol. 83, pp. 59-61.
21. 21. R. Hudson: Met. Finish., 1985, vol. 83, pp. 73-80.
22. 22. J. Shi, D.R. Wang, Y.D. He, H.B. Qi, and G. Wei: Mater. Lett., 2008, vol. 62, pp. 3500-2.10.1016/j.matlet.2008.03.004 ↗
23. 23. C. Guan, J. Li, N. Tan, Y.Q. He, and S.G. Zhang: Int. J. Hydrogen Energy, 2014, vol. 39, pp. 15116-24.10.1016/j.ijhydene.2014.07.024 ↗
24. 24. R.Y. Chen and W.Y.D. Yuen: Oxid. Met., 2000, vol. 53, pp. 539-60.10.1023/A:1004637127231 ↗
25. 25. R.Y. Chen and W.Y.D. Yuen: Oxid. Met., 2001, vol. 56, pp. 89-118.10.1023/A:1010395419981 ↗
26. 26. W.H. Kim, S. Lee, S.M. Kim, and D.J. Min: Int. J. Hydrogen Energy, 2013, vol. 38, pp. 4194-200.10.1016/j.ijhydene.2013.01.147 ↗
27. 27J. D. Hancock and J.H. Sharp: J. Am. Ceram. Soc., 1972, vol. 55, pp. 74-7.10.1111/j.1151-2916.1972.tb11213.x ↗
28. 28. A. Ortega: Thermochim. Acta., 1996 vol. 284, pp. 379-87.10.1016/0040-6031(95)02766-1 ↗
29. 29. K. Piotrowski, K. Mondal, H. Lorethova, L. Stonawski, T. Szymanski, and T. Wiltowoski: Int. J. Hydrogen Energy, 2005, vol. 30, pp. 1543-54.10.1016/j.ijhydene.2004.10.013 ↗
30. 30. A. Pineau, N. Kanari, and I. Gaballah: Thermochim. Acta., 2006, vol. 447, pp. 89-100.10.1016/j.tca.2005.10.004 ↗
31. 31. A. Pineau, N. Kanari, and I. Gaballah: Thermochim. Acta., 2007 vol. 456, pp. 75-88.10.1016/j.tca.2007.01.014 ↗