journal article·2008-09

Effect of Filler Metal Composition on the Strength of Yttria Stabilized Zirconia Joints Brazed with Pd-Ag-CuO x

Jens T. Darsell, K. Scott Weil

Publisher page

Abstract

Various compositions in the Ag-CuOx system are being investigated as potential filler metals for use in air brazing high-temperature electrochemical devices such as solid oxide fuel cells and gas concentrators. Prior work has shown that the melting temperature, and therefore the potential operational temperature, of these materials can be increased by alloying with palladium. The current study examines the effects of palladium addition on the joint strength of specimens prepared from yttria stabilized zirconia (YSZ) bars brazed with three different families of filler metals: Ag-CuO, 5Pd-Ag-CuO, and 15Pd-Ag-CuO. In general, it was found that palladium leads to a small-to-moderate decrease in joint strength, particularly in low copper oxide containing filler metals. However, the declination in strength is likely an acceptable trade-off for increased use temperature. In addition, a critical composition was observed for each filler metal series at which the mechanism for joint failure underwent a transition, typically from ductile to brittle failure. In each case, this composition corresponds approximately to the silver-rich boundary composition of the liquid miscibility gap in each system at the temperature of brazing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Advanced materials and composites · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. K.S. Weil, J.Y. Kim, J.S. Hardy: Electrochem. Solid State Lett., 2005, vol. 8, pp. A133–3610.1149/1.1850391 ↗
2. J.Y. Kim, J.S. Hardy, K.S. Weil: J. Am. Ceram. Soc., 2005, vol. 88, pp. 2521–2710.1111/j.1551-2916.2005.00492.x ↗
3. Y.V. Naidich, V.N. Eremenko: Sov. Powder Metall. Met. Ceram., 1965, vol. 4, pp. 272–7610.1007/BF00774336 ↗
4. C.C. Schuler, A. Stuck, N. Beck, H. Keser, U. Tack: J. Mater. Sci. Mater. Electron., 2000, vol. 11, pp. 389–9610.1023/A:1008942502309 ↗
5. A.M. Meier, P.R. Chidambaram, G.R. Edwards: J. Mater. Sci., 1995, vol. 30, pp. 4781–8610.1007/BF01154485 ↗
6. K.M. Erskine, A.M. Meier, S.M. Pilgrim: J. Mater. Sci., 2002, vol. 37, pp. 1705–0910.1023/A:1014912923977 ↗
7. K.S. Weil, J.Y. Kim, and J.S. Hardy: U.S. Patent 7,055,733
8. K.S. Weil, J.P. Rice: Scripta Mater., 2005, vol. 52, pp. 1081–8510.1016/j.scriptamat.2005.02.010 ↗
9. J.P. Rice: Master’s Dissertation, Washington State University, Pullman, WA, 2004
10. J.T. Darsell, K.S. Weil: J. Phase Equilibrium Diffus., 2006, vol. 27, pp. 92–10110.1361/105497106X92862 ↗
11. J.T. Darsell, K.S. Weil: J. Alloy Compd., 2007, vol. 433, pp. 184–9210.1016/j.jallcom.2006.06.073 ↗
12. J.T. Darsell: Ph.D. Dissertation, Washington State University, Pullman, WA, 2007
13. J.T. Darsell, K.S. Weil: Scripta Mater., 2007, vol. 56, pp. 1111–1410.1016/j.scriptamat.2007.01.050 ↗
14. H. Nishiura, R.O. Suzuki, K. Ono, L.J. Gauckler: J. Am. Ceram. Soc., 1998, vol. 81, pp. 2181–8710.1111/j.1151-2916.1998.tb02604.x ↗
15. Z.B. Shao, K.R. Liu, L.Q. Liu, H.K. Liu, S.X. Dou: J. Am. Ceram. Soc., 1993, vol. 76, pp. 2663–6410.1111/j.1151-2916.1993.tb03996.x ↗
16. “Standard Methods for Evaluating the Strength of Brazed Joints in Shear,” AWS C3.2M/C3.2:2001, American Welding Society, Miami, FL
17. J. Cahn: J. Chem. Phys., 1977, vol. 66, pp. 3667–7210.1063/1.434402 ↗
18. S. Ross, R.E. Kornbrekke: J. Coll. Interface Sci., 1984, vol. 99, pp. 446–5410.1016/0021-9797(84)90132-2 ↗
19. P. Wynblatt, A. Saul, D. Chatain: Acta Mater., 1998, vol. 46, pp. 2337–4710.1016/S1359-6454(97)00390-X ↗