journal article·2011-12Open access

Critical Strengths for Slip Events in Nanocrystalline Metals: Predictions of Quantized Crystal Plasticity Simulations

Lin Li, Myoung-Gyu Lee, Peter M. Anderson

Abstract

This article studies how the monotonic and cyclic stress-strain response of nanocrystalline (NC) metals is affected by the grain-to-grain distribution of critical strengths (τ c ) for slip events, as well as plastic predeformation (e pre ). This is accomplished via finite element simulations that capture large jumps in plastic strain from dislocation slip events—a process referred to as quantized crystal plasticity (QCP).[1] The QCP simulations show that τ c and e pre significantly alter the monotonic and cyclic response at small strain, but only τ c affects the response at large strain. These features are exploited to systematically infer the τ c and e pre characteristics that best fit experimental data for electrodeposited (ED) NC Ni. Key outcomes are the following: (1) the τ c distribution is truncated, with an abrupt onset of slip events at a critical stress; (2) e pre = −0.4 pct, signifying precompression; (3) there is reverse slip bias, meaning that reverse slip events are easier than forward events; and (4) highly inhomogeneous residual stress states can be enhanced or reduced by tensile deformation, depending on e pre .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. L. Li, P.M. Anderson, M.G. Lee, E. Bitzek, P. Derlet, and H. Van Swygenhoven: Acta Mater., 2009, vol. 57, pp. 812–22.10.1016/j.actamat.2008.10.035 ↗
2. E. Bitzek, P.M. Derlet, P. Anderson, and H. Van Swygenhoven: Acta Mater., 2008, vol. 56, pp. 4846–57.10.1016/j.actamat.2008.05.043 ↗
3. K.S. Kumar, H. Van Swygenhoven, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 5743–74.10.1016/j.actamat.2003.08.032 ↗
4. M.A. Meyers, A. Mishra, and D.J. Benson: Prog. Mater. Sci., 2006, vol. 51, pp. 427–556.10.1016/j.pmatsci.2005.08.003 ↗
5. J. Rajagopalan, J.H. Han, and M.T.A. Saif: Science, 2007, vol. 315, pp. 1831–34.10.1126/science.1137580 ↗
6. J. Rajagopalan, J.H. Han, and M.T.A. Saif: Scripta Mater., 2008, vol. 59, pp. 734–37.10.1016/j.scriptamat.2008.06.010 ↗
7. I. Lonardelli, J. Almer, G. Ischia, C. Menapace, and A. Molinari: Scripta Mater., 2009, vol. 60, pp. 520–23.10.1016/j.scriptamat.2008.11.045 ↗
8. Z. Budrovic, H. Van Swygenhoven, P.M. Derlet, S. Van Petegem, and B. Schmitt: Science, 2004, vol. 304, pp. 273–76.10.1126/science.1095071 ↗
9. S. Brandstetter, Z. Budrovic, S. Van Petegem, B. Schmitt, E. Stergar, P.M. Derlet, and H. Van Swygenhoven: Appl. Phys. Lett., 2005, vol. 87, pp. 231910-1–2.10.1063/1.2138359 ↗
10. S. Brandstetter, H. Van Swygenhoven, S. Van Petegem, B. Schmitt, R. Maass, and P.M. Derlet: Adv. Mater., 2006, vol. 18, pp. 1545–48.10.1002/adma.200600397 ↗
11. S. Van Petegem, S. Brandstetter, H. Van Swygenhoven, and J.L. Martin: Appl. Phys. Lett., 2006, vol. 89, pp. 073102-1–3.10.1063/1.2336726 ↗
12. H. Van Swygenhoven: Nat. Mater., 2006, vol. 5, pp. 841–41.10.1038/nmat1764a ↗
13. H. Van Swygenhoven, P.M. Derlet, and A.G. Froseth: Nat. Mater., 2004, vol. 3, pp. 399–403.10.1038/nmat1136 ↗
14. H. Van Swygenhoven, P.M. Derlet, and A.G. Froseth: Acta Mater., 2006, vol. 54, pp. 1975–83.10.1016/j.actamat.2005.12.026 ↗
15. H. Van Swygenhoven, P.M. Derlet, and A. Hasnaoui: Phys. Rev. B, 2002, vol. 66, pp. 024101-1–8.10.1103/PhysRevB.66.024101 ↗
16. V. Yamakov, D. Wolf, S.R. Phillpot, A.K. Mukherjee, and H. Gleiter: Nat. Mater., 2004, vol. 3, pp. 43–47.10.1038/nmat1035 ↗
17. ABAQUS, ABAQUS Reference Manuals, Hibbitt, Karlsson & Sorensen Inc., Pawtucket, RI, 2005.
18. S.R. Kalidindi, C.A. Bronkhorst, and L. Anand: J. Mech. Phys. Solids, 1992, vol. 40, pp. 537–69.10.1016/0022-5096(92)80003-9 ↗
19. H.B. Huntington: Solid State Phys., 1958, vol. 7, p. 213.10.1016/S0081-1947(08)60553-6 ↗
20. Ohio Supercomputer Center, http://www.osc.edu/supercomputing/computing/opt/index.shtml
21. F. Ebrahimi, G.R. Bourne, M.S. Kelly, and T.E. Matthews: Nanostruct. Mater., 1999, vol. 11, pp. 343–50.10.1016/S0965-9773(99)00050-1 ↗
22. M. Zaiser and N. Nikitas: J. Stat. Mech. Theory Exp., 2007, vol. 2007, pp. P04013-1–10.10.1088/1742-5468/2007/04/P04013 ↗
23. A.M. El-Sherik, J. Shirokoff, and U. Erb: J. Alloys Compd., 2005, vol. 389, pp. 140–43.10.1016/j.jallcom.2004.08.010 ↗