journal article·2006-01

Thermal analysis of the compositional shift in a transient liquid phase during sintering of a ternary Cu-Sn-Bi powder mixture

T. D’Hondt, S. F. Corbin

Publisher page

Abstract

In this work, differential scanning calorimetry (DSC) and microstructural analysis were used to study the transient-liquid-phase sintering (TLPS) of a Cu-Sn-Bi powder mixture. During sintering, the liquid phase shifts from a Sn-rich (i.e., ∼90 wt pct Sn) to a Bi-rich (i.e., >78 wt pct Bi) composition. In addition, the presence of Bi creates two melting events: a Sn:Bi eutectic reaction at 139 °C and a reaction involving the melting of (Bi) at 191 °C. The Sn:Bi eutectic melting event was fully transient. The melting event at 191 °C was consistent with the formation of a terminal Bi-rich liquid phase. The rate of compositional shift toward this terminal liquid phase at 260 °C was dependent on the rate of the reaction of the Sn with the Cu powder to form intermetallic phases. For mixtures made with medium and fine Cu powder, the terminal Bi-rich composition was reached after isothermal hold times of 20 and 15 minutes, respectively. This resulted in a new melting point for the mixture of 191 °C. For coarse Cu powders, the rate of the compositional shift toward a Bi-rich composition was much slower. The liquid phase remained at a hypoeutectic Sn-Bi composition estimated at 80 wt pct Sn, while the mixture maintained a melting point of 139 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Injection Molding Process and Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Y. Zhou, W.F. Gale, and T.H. North: Int. Mater. Rev., 1995, vol. 40 (5), pp. 181–96.10.1179/imr.1995.40.5.181 ↗
2. W.D. MacDonald and T.W. Eagar: Annu. Rev. Mater. Sci., 1992, vol. 22, pp. 23–46.10.1146/annurev.ms.22.080192.000323 ↗
3. R.M. German and J.W. Dunlap: Metall. Trans. A, 1986, vol. 17A, p. 205.10.1007/BF02643896 ↗
4. R.N. Lumley and G.B. Schaffer: Scripta Mater., 1996, vol. 35, p. 589.10.1016/1359-6462(96)00195-9 ↗
5. R.M. German: Sintering theory and practice, Wiley-Interscience publications, NY, 1996, pp. 7–40.
6. R. Ventkatraman, J.R. Wilcox, and S.R. Cain: Metall. Trans. A, 1997, vol. 28A, pp. 699–706.10.1007/s11661-997-0056-z ↗
7. P. Gandhi, C. Gallagher, and G. Matijasevic: J. Electron. Mater., 1999, vol. 28, pp. 912–15.10.1007/s11664-999-0219-3 ↗
8. T. Studnitzky and R. Schmid-Fetzer: Journal of the Minerals Metals & Materials Society, 2002, vol. 54 (12), pp. 58–63.10.1007/BF02709191 ↗
9. X. Qiao and S.F. Corbin: Mater. Sci. Eng., 2000, vol. A283, pp. 38–45.10.1016/S0921-5093(00)00621-3 ↗
10. C.W. Sinclair, G.R. Purdy, and J.E. Morral: Metall. Trans. A, 2000, vol. 31A, pp. 1187–92.10.1007/s11661-000-0114-2 ↗
11. C.W. Sinclair: J. Phase Equilibria, 1999, vol. 20, pp. 361–69.10.1361/105497199770340888 ↗
12. C.E. Campbell and W. Boettinger: Metall. Trans. A, 2000, vol. 31, pp. 2835–47.10.1007/BF02830355 ↗
13. G.R. Purdy, D.V. Malakhov, and A. Guha: J. Phase Equilibria, 2001, vol. 22, pp. 439–50.10.1361/105497101770333009 ↗
14. B. Reyburn and S.F. Corbin: Int. J. Powder Metallurgy, 2000, vol. 36, p. 57.
15. T. d’Hondt: Master’s Thesis, University of Waterloo, Waterloo, ON, Canada, 2002.
16. http://www.metallurgy.nist.gov/phase/solder/bicusn.html
17. B. Reyburn: Master’s Thesis, University of Waterloo, Waterloo, ON, Canada, 1999.
18. P.T. Vianco, P.F. Hlava, and A.C. Kilgo: J. Electron. Mater., 1994, vol. 23, p. 583.10.1007/BF02653343 ↗