Grain boundary sliding and component shape distortion during liquid-phase sintering
Source abstract
Abstract
Even when solid grains are connected into a solid skeleton, there is possible component shape distortion during liquid-phase sintering. The criterion established here is based on the effective stress and its relation to the strength of the bond between contacting solid grains in the liquid matrix. Distortion by grain sliding is treated for solid volume fractions over the percolation limit to explain progressive distortion observed in high solid volume fraction systems. New microstructure-based criteria are presented for situations where solid grain contiguity exceeds the percolation limit, yet grain sliding occurs in response to external stresses, such as from gravity or thermal gradients during heating. This treatment provides a method for linking macrostructure to distortion during liquid-phase sintering for many common alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. R.M. German: Advances in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1991, vol. 4, pp. 183–194.
2. R. Ganesan, A. Griffo, and R.M. German: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 659–64.10.1007/s11661-998-0146-6 ↗
3. A. Upadhyaya and R.M. German: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2631–38.10.1007/s11661-998-0235-6 ↗
4. A. Upadhyaya: Ph.D. Thesis, The Pennsylvania State University, University Park, PA, 1998.
5. J. Liu, A. Upadhyaya, and R.M. German: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2209–20.10.1007/s11661-999-0033-9 ↗
6. J. Liu and R.M. German: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3211–17.10.1007/s11661-999-0231-5 ↗
7. M.R. Horne: Proc. R. Soc., Ser. A, 1965, vol. 286, pp. 79–97.
8. M. Oda: Soils and Foundations, 1975, vol. 15 (2), pp. 17–29.10.3208/sandf1972.15.2_17 ↗
9. P.A. Cundall, A. Drescher, and O.D.L. Strack: IUTAM Conf. on Deformation and Failure of Granular Materials, P.A. Vermeer and H.J. Luger, eds., International Union of Theoretical and Applied Mechanics, Delft, The Netherlands (distributed in USA, A.A. Balkema, Salem, NH) 1982, pp. 355–70.
10. A. Drescher and G. de Josselin de Jong: J. Mech. Phy. Solids, 1972, vol. 20, pp. 337–51.10.1016/0022-5096(72)90029-4 ↗
11. M. Oda, J. Konishi, and S. Nemat-Nasser: Mech. Mater., 1982, vol. 1 (4), pp. 269–83.10.1016/0167-6636(82)90027-8 ↗
12. G. Deutscher, R. Zallen, and J. Adler: Percolation Structures and Processes, Adam Hilger, Bristol, United Kingdom, 1983.
13. B.D. Hughes and B.W. Ninham: in Series of Lecture Notes in Mathematics, A. Dold and B. Eckmann, eds., Springer-Verlag, Minneapolis, MN, 1983, vol. 1035.
14. A. Bunde and S. Havlin: Fractals and Disordered Systems, Springer, Berlin, 1991.10.1007/978-3-642-51435-7 ↗
15. D. Stauffer and A. Aharony: Introduction to Percolation Theory, 2nd ed., Taylor & Francis Ltd., London, 1992.
16. B.D. Hughes: Random Environments and Random Walks, Oxford University Press, London, 1993.
17. P.J. Flory: J. Am. Chem. Soc., 1941, vol. 63, pp. 3083–90.10.1021/ja01856a061 ↗
18. W.H. Stockmayer: J. Chem. Phys., 1943, vol. 11, pp. 45–55.10.1063/1.1723803 ↗
19. M. Sahimi: Applications of Percolation Theory, Taylor & Francis Ltd., London, 1994.10.1201/9781482272444 ↗
20. E.E. Underwood: Quantitative Stereology, Addison-Wesley, Reading, MA, 1970.
21. P.W. Rowe: Proc. R. Soc., Ser. A, 1962, vol. 269, pp. 500–27.
22. P.J. Bardet and J. Proubet: Geotechnique, 1991, vol. 41, pp. 599–613.10.1680/geot.1991.41.4.599 ↗
23. B.B. Straumal, E.I. Rabkin, and W. Gust: III Int. Symp. Dispersion Strengthened Materials, Cheboksary, Russia, Sept. 22–24, 1993.
24. A.S. Nowick and B.S. Berry: An Elastic Relaxation in Crystalline Solid, Academic Press, New York, NY, 1972.
25. C. Zener: Phys. Rev., 1941, vol. 60, pp. 906–08.10.1103/PhysRev.60.906 ↗
26. T.S. Ke: Phys. Rev., 1947, vol. 72, pp. 41–46.10.1103/PhysRev.72.41 ↗
27. F. Ghahremani: Int. J. Solids Struct., 1980, vol. 16, pp. 825–45.10.1016/0020-7683(80)90052-9 ↗
28. K.S. Churn and R.M. German: Metall. Trans. A, 1984, vol. 15A, pp. 331–38.10.1007/BF02645119 ↗
29. Y. Liu, R. Tandon, and R.M. German: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2423–30.10.1007/BF02671256 ↗
30. H. Riegger, J.A. Pask, and H.E. Exner: Sintering Processes, G.C. Kuczynski, ed., Plenum Press, New York, NY, 1980, pp. 219–33.10.1007/978-1-4899-5301-8_19 ↗
31. R. Warren: J. Mater. Sci., 1968, vol. 3, pp. 471–85.10.1007/BF00549730 ↗
32. R. Warren: J. Mater. Sci., 1972, vol. 7, pp. 1434–42.10.1007/BF00574935 ↗
33. R.M. German: Sintering Theory and Practice, Wiley-Interscience, New York, NY, 1996.
34. R.M. German: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 279–88.10.1007/BF02664666 ↗
35. R. Raman and R.M. German: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 653–60.10.1007/BF02663915 ↗
36. W.D. Klopp and P.L. Raffo: “Effects of Purity and Structure on Recrystallization, Grain Growth, Ductility, Tensile and Greep Properties of Arc-Melted Tungsten,” NASA-TND-2503, Lewis Research Center, Cleveland, OH, 1964.
37. R.M. German: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1553–67.10.1007/s11661-997-0217-0 ↗
38. C.M. Kipphut, A. Bose, T. Kishi, and R.M. German: Advances in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1993, vol. 2, pp. 415–29.
39. S.C. Yang and R.M. German: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 786–91.10.1007/BF02670302 ↗
40. S.S. Mani and R.M. German: Advances in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1991, vol. 4, pp. 195–212.
41. S. Kohara and M. Hoshino: Advances in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1993, vol. 2, pp. 169–80.
42. Y. Liu, D.F. Heaney, and R.M. German: Acta Metall. Mater., 1995, vol. 43, pp. 1587–92.10.1016/0956-7151(94)00363-M ↗
43. C.M. Kipphut, A. Bose, S. Farooq, and R.M. German: Metall. Trans. A, 1988, vol. 19A, pp. 1905–13.10.1007/BF02645192 ↗
44. W.D. Kingery: J. Appl. Phys., 1959, vol. 30, pp. 301–06.10.1063/1.1735155 ↗
45. R.B. Heady and J.W. Cahn: Metall. Trans. A, 1970, vol. 1A, pp. 185–89.10.1007/BF02819260 ↗
46. W.J. Huppmann and H. Riegger: Acta Metall., 1973, vol. 21, pp. 965–71.
47. G.H. Gessinger, H.F. Fishmeister, and H.L. Lukas: Acta Metall., 1973, vol. 21, pp. 715–24.10.1016/0001-6160(73)90082-5 ↗
48. V. Smolej and S. Pejovink: Z. Metallkd., 1976, vol. 67, pp. 603–05.
49. K.S. Hwang, R.M. German, and F.V. Lenel: Metall. Trans. A, 1987, vol. 18A, pp. 11–17.10.1007/BF02646216 ↗
50. Y. Liu, R. Tandon, and R.M. German: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2415–22.10.1007/BF02671255 ↗
51. J. Liu and R.M. German: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 165–69.10.1007/s11661-001-0112-z ↗