journal article·2016-01

Influence of Powder Particle Size on the Compaction Behavior and Mechanical Properties of a High-Alloy Austenitic CrMnNi TRIP Steel During Spark Plasma Sintering

S. Decker, S. Martin, L. Krüger

Publisher page

Abstract

In this study, varying powder particle size fractions (<25, 25 to 45, 45 to 63 µm) of a TRIP steel powder were compacted by spark plasma sintering (SPS). Densification initiated at a slightly lower temperature with decreasing particle size due to increasing green density. With decreasing powder particle size fraction, the as-sintered materials exhibited smaller grain sizes. Compression tests revealed a slight decrease of the compressive yield strength with increasing particle size and, accordingly, larger grain size. A few large deformation bands formed in bigger grains, while many thin deformation bands were formed in smaller grains. α′-Martensite nuclei formed successively inside the deformation bands, reducing the mean free path of (partial) dislocation slip. Due to the size of the deformation bands, α′-martensite formation started at lower strains with increasing particle size. When α′-martensite formation was initiated, work hardening was influenced more by α′-martensite formation than by the grain size of the steel matrix. Hence, work hardening increased with increasing particle size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Z.A. Munir, U. Anselmi-Tamburini, M. Ohyanagi: J. Mater. Sci., 2006, vol. 41, pp. 763–77.10.1007/s10853-006-6555-2 ↗
2. O.D. Neikov: Handbook of Non-Ferrous Metal Powders, 1st ed., Elsevier, Oxford, 2009, pp. 102–142.10.1016/B978-1-85617-422-0.00005-7 ↗
3. H. Schumann and H. Oettel: Metallografie, 14th ed., Wiley-VCH, Weinheim, 2005, pp. 454–57.
4. R. Riedel and I-W. Chen: Ceramics Science and Technology, vol. 3, Wiley-VCH, Weinheim, 2012, pp. 3-156.
5. Z.H. Zhang, F.C. Wang, S.K. Lee, Y. Liu, J.W. Cheng, Y. Liang: Mater. Sci. Eng. A, 2009, vol. 523, pp. 134–38.10.1016/j.msea.2009.07.016 ↗
6. S. Diouf and A. Molinari: Powder Technol., 2012, vol. 221, pp. 220–27.10.1016/j.powtec.2012.01.005 ↗
7. Z. Xu, C. Jia, C. Kuang, K. Chu, X. Qu: J. Alloy. Compd., 2009, vol. 484, pp.924–28.10.1016/j.jallcom.2009.05.075 ↗
8. M. Pellizzari, A. Fedrizzi, M. Zadra: Mater. Design, 2011, vol. 32, pp. 1796-805.10.1016/j.matdes.2010.12.033 ↗
9. Y.F. Yang, H. Imai, K. Kondoh, M. Qian, Int. J. Powder Metall., 2014, vol. 50, no. 1, pp. 41-47.
10. L. Krüger, S. Wolf, S. Martin, A. Jahn, A. Weiß, P.R. Scheller: Steel Res. Int., 2011, vol. 82, pp.1087–93.10.1002/srin.201100067 ↗
11. S. Wolf, S. Martin, L. Krüger, U. Martin: Mater. Sci. Eng. A, 2014, vol. 594, pp. 72–81.10.1016/j.msea.2013.11.041 ↗
12. S. Decker, L. Krüger, S. Richter, S. Martin, U. Martin: Steel Res. Int., 2012, vol. 83, pp. 521–28.10.1002/srin.201100268 ↗
13. M. Umemoto and W.S. Owen: Metall. Trans., 1974, vol. 5, pp. 2041–46.10.1007/BF02644497 ↗
14. I. Tamura: Metal Sci., 1982, vol. 16, pp. 245–53.10.1179/030634582790427316 ↗
15. S. Martin: Deformationsmechanismen bei verschiedenen Verformungstemperaturen in austenitischem TRIP/TWIP-Stahl, 1st ed., Freiberger Forschungshefte, Freiberg, 2014, pp. 37, 125–32.
16. N.M. Rahaman: Ceramic Processing and Sintering, 2nd ed., Marcel Dekker Inc., New York, 2003, pp. 797-867.
17. B. Kieback and J. Trapp, Pulvermetallurgie, Hagener Symposium, 2011, pp. 47–75.
18. L.A. Stanciu, V.Y. Kodash, J.R. Groza, Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2633–38.10.1007/s11661-001-0053-6 ↗
19. S. Martin, S. Decker, L. Krüger, U. Martin, D. Rafaja, Adv. Eng. Mater., 2013, vol. 15, no. 7, pp. 600–608.10.1002/adem.201200330 ↗
20. R.M. German: Sintering from Empirical Observations to Scientific Principles, 1st ed., Elsevier, Oxford, 2014, pp. 188-226.
21. A. Jahn, A. Kovalev, A. Weiß, P.R. Scheller: Steel Res. Int., 2011, vol. 82, no. 9, pp. 1108–12.10.1002/srin.201100063 ↗
22. A. Weidner, A. Müller, A. Weiss, H. Biermann: Mater. Sci. Eng. A, 2013, vol. 571, pp. 68–76.10.1016/j.msea.2013.02.008 ↗
23. P. Franke, H.J. Seifert: Landolt-Börnstein Group IV, vol. 19, Springer, Berlin, 2012.
24. E.O. Hall: Proc. Phy. Soc. B, 1951, 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
25. T. Byun: Acta Mater., 2003, vol. 51, pp. 3063-71.10.1016/S1359-6454(03)00117-4 ↗
26. J. Talonen, H. Hänninen: Acta Mater., 2007, vol. 55, pp. 6108–18.10.1016/j.actamat.2007.07.015 ↗
27. S. Martin, C. Ullrich, D. Šimek, U. Martin, D. Rafaja: J. Appl. Cryst., 2011, vol. 44, pp. 779–87.10.1107/S0021889811019558 ↗
28. D. Rafaja, C. Krbetschek, C. Ullrich, S. Martin: J. Appl. Cryst., 2014, vol. 47, pp. 936–47.10.1107/S1600576714007109 ↗
29. L. Remy and A. Pineau: Mater. Sci. Eng., 1977, vol. 28, pp. 99–107.10.1016/0025-5416(77)90093-3 ↗
30. J. Venables: Phil. Mag., 1962, vol. 7, pp. 35–44.10.1080/14786436208201856 ↗
31. S. Martin, S. Wolf, U. Martin, L. Krüger, A. Jahn: Conf. Proc. of ESOMAT 2009, Prague, 05022.
32. H. Idrissi, K. Renard, D. Schryvers, P. Jacques, Scripta Mater., 2010, vol. 63, pp. 961–64.10.1016/j.scriptamat.2010.07.016 ↗
33. S. Lee, B. De Cooman, Metall. Mater. Trans. A, 2014, vol. 45A, pp. 710–16.
34. Y. Tomita, T. Iwamoto: Int. J. Mech. Sci., 1995, vol. 37, pp. 1295–305.10.1016/0020-7403(95)00039-Z ↗
35. D. Geissler, J. Freudenberger, A. Kauffmann, M. Krautz, H. Klauss, A. Voss, J. Eickemeyer, L. Schultz: Acta Mater., 2011,vol. 59, pp. 7711–23.10.1016/j.actamat.2011.08.040 ↗
36. C.W. Sinclair, R. Hoagland, Acta Mater., 2008, vol. 56, pp. 4160–71.10.1016/j.actamat.2008.04.043 ↗