journal article·2015-01Open access

Creep Deformation of Allvac 718Plus

Robert W. Hayes, Raymond R. Unocic, Maryam Nasrollahzadeh

Abstract

The creep deformation behavior of Allvac 718Plus was studied over the temperature range of 923 K to 1005 K (650 °C to 732 °C) at initial applied stress levels ranging from 517 to 655 MPa. Over the entire experimental temperature–stress regime this alloy exhibits Class M-type creep behavior with all creep curves exhibiting a decelerating strain rate with strain or time throughout primary creep. However, unlike pure metals or simple solid solution alloys, this gamma prime strengthened superalloy does not exhibit steady-state creep. Rather, primary creep is instantly followed by a long duration of accelerating strain rate with strain or time. These creep characteristics are common among the gamma prime strengthened superalloys. Allvac 718Plus also exhibits a very high temperature dependence of creep rate. Detailed TEM examination of the deformation structures of selected creep samples reveals dislocation mechanisms similar to those found in high volume fraction gamma prime strengthened superalloys. Strong evidence of microtwinning is found in several of the deformation structures. The presence of microtwinning may account for the strong temperature dependence of creep rate observed in this alloy. In addition, due to the presence of Nb and thus, grain boundary delta phase, matrix dislocation activity which is not present in non-Nb-bearing superalloys occurs in this alloy. The creep characteristics and dislocation mechanisms are presented and discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. E.A. Loria, ed.: Superalloys 718,625,706 and Derivatives, TMS, Warrendale, PA, 2005.
2. O. D. Sherby and P.M. Burke, Prog. Mater. Sci., Vol. 13, pp 325–90, (1968).10.1016/0079-6425(68)90024-8 ↗
3. A. K. Mukerjee, J. E. Bird and J. E. Dorn, Trans, ASM, Vol. 62, p. 155, (1969).
4. O. D. Sherby, Acta Metall., Vol. 10, pp. 135–47, (1962).10.1016/0001-6160(62)90058-5 ↗
5. J. Weertman, J. Appl. Phys., Vol. 28, p. 362, (1957).10.1063/1.1722747 ↗
6. J. Weertman, J. Appl. Phys., Vol. 26, p. 1213, (1955).10.1063/1.1721875 ↗
7. F.R.N. Nabarro: Report of a Conference on the Strength of Solids, Physical Society, London, 1948, p. 75.
8. C. Herring, J, Appl. Phys., Vol. 21, p. 437, (1950).10.1063/1.1699681 ↗
9. R. L. Coble, J. Appl. Phys., Vol. 34, p. 1679, (1963).10.1063/1.1702656 ↗
10. T.G. Langdon and R.B. Vastava: Mechanical Testing for Deformation Model Development, R.W. Rhode and J.C. Swearengen, eds., ASTM, Philadelphia, PA, 1982, pp. 435–51.10.1520/STP28901S ↗
11. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, New York, 1982.
12. G. B. Viswanathan, P. M. Sarosi, M. F. Henry, D. D. Whitis, W. W. Milligan and M. J. Mills, Acta Materialia, Vol. 53, pp. 3041–57, (2005).10.1016/j.actamat.2005.03.017 ↗
13. P. Caron, P. J. Henderson, T. Khan. And M. McLean, Scripta Metall., Vol. 20, p. 875, (1986).10.1016/0036-9748(86)90458-8 ↗
14. S. Sinharoy, P. VirroNic, and W.W. Milligan: Metall. Mater. Trans A, vol. 32A, pp. 2021–32 (2001).10.1007/s11661-001-0014-0 ↗
15. K. R. Williams and B. Wilshire, Metal. Sci. J., Vol. 9, p. 248, (1972).
16. B. Wilshire and M. T. Whittaker, Acta Materialia,Vol. 57, pp. 4115–24, (2009).10.1016/j.actamat.2009.05.009 ↗
17. J. Rosler, R. Joos and E. Arzt, Metall. Trans. A, Vol 23A, pp. 1521–39, (1992).10.1007/BF02647335 ↗
18. B. F. Dyson and M. McLean, Acta. Metall., Vol. 31, pp. 17–27 (1983).10.1016/0001-6160(83)90059-7 ↗
19. B. F. Dyson and T. B. Gibbons, Acta. Metall., Vol. 35, pp. 2355–69 (1987).10.1016/0001-6160(87)90083-6 ↗
20. M. Kolbe: Mater. Sci. Eng., vol. 319–321, pp. 383–87 (2001).10.1016/S0921-5093(01)00944-3 ↗
21. L. Kovarik, R.R. Unocic, Ju Li, P. Sarosi, C. Shen, Y. Wang and M. J. Mills, Progress in Materials Science, Vol. 54, pp. 839–73, (2009).10.1016/j.pmatsci.2009.03.010 ↗
22. R.R. Unocic, L. Kovarik, C. Shen, P.M. Sarosi, Y. Wang, J. Li, S. Ghosh, and M.J. Mills: Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.C. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 377–85.10.7449/2008/Superalloys_2008_377_385 ↗
23. N. Zhou, C. Shen, M. J. Mills, J. Li and Y. Wang, Acta Materialia, Vol. 59, pp. 3484–97, (2011).10.1016/j.actamat.2011.02.022 ↗
24. M. Sundararaman, P. Mukhopadhyay and S. Banerjee, Metall. Trans. A, Vol. 19A, pp. 453–65, (1988).10.1007/BF02649259 ↗