journal article·2014-03

Ductility Loss in Ductile Cast Iron with Internal Hydrogen

Hisao Matsunaga, Teruki Usuda, Keiji Yanase, Masahiro Endo

Publisher page

Abstract

Hydrogen-induced ductility loss in ductile cast iron (DCI) was studied by conducting a series of tensile tests with three different crosshead speeds. By utilizing the thermal desorption spectroscopy and the hydrogen microprint technique, it was found that most of the solute hydrogen was diffusive and mainly segregated at the graphite, graphite/matrix interface zone, and the cementite of pearlite in the matrix. The fracture process of the non-charged specimen was dominated by the ductile dimple fracture, whereas that of the hydrogen-charged specimen became less ductile because of the accompanying interconnecting cracks between the adjacent graphite nodules. Inside the hydrogen-charged specimen, the interspaces generated by the interfacial debonding between graphite and matrix are filled with hydrogen gas in the early stage of the fracture process. In the subsequent fracture process, such a local hydrogen gas atmosphere coupled with a stress-induced diffusion attracts hydrogen to the crack tip, which results in a time-dependent ductility loss.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Y. Murakami and H. Matsunaga: Int. J. Fatigue, 2006, vol. 28, pp.1509–20.10.1016/j.ijfatigue.2005.06.059 ↗
2. H. Irie: J. Fuel Cell Technol., 2012, vol. 11, pp. 6–10.
3. C. Dunwoody: Fuel Cells Bull., 2009, vol. 11, pp. 12–14.10.1016/S1464-2859(09)70375-X ↗
4. J. Köhler: Technol. Forecast. Soc. Chang., 2010, vol. 77, pp. 1237–48.10.1016/j.techfore.2010.03.010 ↗
5. E. Kim, K. Lee, J. Kim, Y. Lee, J. Park, and I. Moon: Int. J. Hydrogen Energy, 2011, vol. 36, pp. 13122–31.10.1016/j.ijhydene.2011.07.053 ↗
6. R. Garber, I.M. Bernsteln, and A.W. Thompson: Scripta Metall., 1976, vol. 10, pp. 341–45.10.1016/0036-9748(76)90089-2 ↗
7. H. Cialone and R.J. Asaro: Metall. Trans. A, 1979, vol. 10A, pp. 367–75.10.1007/BF02658347 ↗
8. H. Cialone and R.J. Asaro: Metall. Trans. A, 1981, vol. 12A, pp. 1373–87.10.1007/BF02643682 ↗
9. S.P. Lynch: Acta Metall., 1988, vol. 36, pp. 2639–61.10.1016/0001-6160(88)90113-7 ↗
10. H. Nishiguchi, Y. Fukushima, S. Matsuoka, and Y. Murakami: Trans. Jpn. Soc. Mech. Eng. A, 2008, vol. 74, pp. 1016–25.10.1299/kikaia.74.1016 ↗
11. H. Nishiguchi, Y. Fukushima, S. Matsuoka, and Y. Murakami: Trans. Jpn. Soc. Mech. Eng. A, 2010, vol. 76, pp. 1459–68.10.1299/kikaia.76.1459 ↗
12. T. Matsuo, N. Homma, S. Matsuoka, and Y. Murakami: Trans. Jpn. Soc. Mech. Eng. A, 2008, vol. 74, pp. 1164–73.10.1299/kikaia.74.1164 ↗
13. K. Yokogawa, S. Fukuyama, and K. Kudo: J. Jpn. Inst. Met., 1980, vol. 44, pp. 870–75.10.2320/jinstmet1952.44.8_870 ↗
14. K. Ogi, H. Hagi, A. Tahara, A. Sawamoto, H. Ikeda, and Y. Hayashi: J. Jpn. Found. Eng. Soc., 1992, vol. 64, pp. 186–91.
15. A. Sawamoto, Y. Hayashi, and N. Ohtani: J. Jpn. Inst. Met., 1979, vol. 43, pp. 513–19.10.2320/jinstmet1952.43.6_513 ↗
16. T. Sakai and H. Kaji: Tetsu-to-Hagané, 1978, vol. 64, pp. 430–38.10.2355/tetsutohagane1955.64.3_430 ↗
17. S. Nomura and M. Hasegawa: Tetsu-to-Hagané, 1975, vol. 61, pp. 2579–88.10.2355/tetsutohagane1955.61.11_2579 ↗
18. J. Ovejero-García: J. Mater. Sci., 1985, vol. 20, pp. 2623–29.10.1007/BF00556094 ↗
19. K. Ichitani and M. Kanno: Sci. Technol. Adv. Mater., 2003, vol. 4, pp. 545–51.10.1016/j.stam.2003.12.006 ↗
20. K. Ichitani, S. Kuramoto, and M. Kanno: Corros. Sci., 2003, vol. 45, pp. 1227–41.10.1016/S0010-938X(02)00218-4 ↗
21. H. Matsunaga and H. Noda: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2696–705.10.1007/s11661-011-0661-8 ↗
22. A. Demarez, A.G. Hocks, and F.A. Meuniers: Acta Metall., 1954, vol. 2, pp. 214–23.10.1016/0001-6160(54)90162-5 ↗
23. K. Takai, Y. Chiba, K. Noguchi, and A. Nozue: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2659–65.10.1007/s11661-002-0387-8 ↗
24. J.R. Davis, ed.: ASM Specialty Handbook: Cast Irons, ASM International, Materials Park, 1996.
25. M. Durand-Charre: Microstructure of Steels and Cast Irons, J.H. Davidson, trans., Springer, Berlin, 2003.10.1007/978-3-662-08729-9 ↗
26. S. Fujita and Y. Murakami: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 303–22.10.1007/s11661-012-1376-1 ↗
27. Y. Murakami, H. Matsunaga, A. Abyazi and Y. Fukushima: Fatigue Fract. Eng. Mater. Struct., 2013, vol. 36, pp. 836–50.10.1111/ffe.12077 ↗
28. C.D. Beachem: Metall. Trans. B, 1972, vol. 3B, pp. 441–55.10.1007/BF02642048 ↗
29. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A, 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
30. S. Matsuoka, N. Homma, H. Tanaka, Y. Fukushima, and Y. Murakami: J. Jpn. Inst. Met., 2006, vol. 70, pp. 1002–11.10.2320/jinstmet.70.1002 ↗
31. T. Kushida, H. Matsumoto, N. Kuratomi, T. Tsumura, F. Nakasato, and T. Kudo: Tetsu-to-Hagané, 1996, vol. 95, pp. 33–34.
32. Y. Murakami, S. Matsuoka, Y. Kondo, S. Nishimura: Mechanism of Hydrogen Embrittlement and Guide for Fatigue Design, Tokyo, Yokendo, 2012.