A Developed Method for Fabricating In-Situ TiC p /Mg Composites by Using Quick Preheating Treatment and Ultrasonic Vibration
Source abstract
Abstract
Quick preheating treatment of the Al-Ti-C pellets and high-intensity ultrasonic vibration are introduced in the fabrication of in-situ TiC p /Mg composites. Al-Ti-C pellets are preheated for about 130 seconds in the furnace at 1023 K (750 °C), in which magnesium is melted as well. In this process, plenty of heat can be accumulated due to the reactive diffusion between liquid aluminum and solid titanium in Al-Ti-C, and a small amount of Al3Ti phase is formed as well. After adding the preheated Al-Ti-C into the molten magnesium, thermal explosion takes place in a few seconds. In the meantime, high-intensity ultrasonic vibration is applied into the melt to disperse in-situ formed TiC particles into the matrix and degas the melt as well. Microstructural characterization indicates that in-situ formed TiC particles are spherical in morphology and smaller than 2 μm in size. Furthermore, a homogeneous microstructure with low porosity of the magnesium composite is obtained due to the effect of ultrasonic vibration. A novel approach using the quick preheating treatment technique and high-intensity ultrasonic vibration to synthesize in-situ TiC p /Mg composites is proposed in our research.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Z.R. Yang, S.Q. Wang, M.J. Gao, Y.T. Zhao, K.M. Chen, and X.H. Cui: Composites A, 2008, vol. 39, 1427–32.10.1016/j.compositesa.2008.05.002 ↗
2. X.Q. Zhang, L.H. Liao, N.H. Ma, and H.W. Wang: Composites A, 2006, vol. 37, pp. 2011–16.10.1016/j.compositesa.2005.12.007 ↗
3. L. Lu, C.Y.H. Lim, and W.M. Yeong: Compos. Struct., 2004, vol. 66, pp. 41–45.10.1016/j.compstruct.2004.04.019 ↗
4. R. Paskaramoorthy, S. Bugarin, and R. Reid: Compos. Struct., 2009, vol. 91, pp. 451–60.10.1016/j.compstruct.2009.04.011 ↗
5. H.Y. Wang, Q.C. Jiang, X.L. Li, and J.G. Wang: Scripta Mater., 2003, vol. 48, pp. 1349–54.10.1016/S1359-6462(03)00014-9 ↗
6. Q.C. Jiang, H.Y. Wang, J.G. Wang, Q.F. Guan, and C.L. Xu: Mater. Lett., 2003, vol. 57, pp. 2580–83.10.1016/S0167-577X(02)01314-9 ↗
7. A.K. Chaubey, B.K. Mishra, N.K. Mukhopadhyay, and P.S. Mukherjee: J. Mater. Sci., 2010, vol. 45, pp. 1507–13.10.1007/s10853-009-4114-3 ↗
8. A. Luo: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2445–55.10.1007/BF02671259 ↗
9. M. Emamy, M. Mahta, and J. Rasizadeh: Compos. Sci. Technol., 2006, vol. 66, pp. 1063–66.10.1016/j.compscitech.2005.04.016 ↗
10. Z.W. Liu, Q.Y. Han, and J.G. Li: Composites B, 2011, vol. 42, pp. 2080–84.10.1016/j.compositesb.2011.04.004 ↗
11. J. Mackowiak and L.L. Shreir: J. Less-Common Met., 1959, vol. 1, pp. 456–66.10.1016/0022-5088(59)90062-1 ↗
12. L. Xu, Y.Y. Cui, Y.L. Hao, and R. Yang: Mater. Sci. Eng. A, 2006, vols. 435–436, pp. 638–47.10.1016/j.msea.2006.07.077 ↗
13. K. Sato, S. Takizawa, S. Miura, and T. Mohri: JPSJ, 2009, vol. 78, pp. 1–6.10.1143/JPSJS.78SA.1 ↗
14. J. Mackowiak and L.L. Shreir: J. Less-Common Met., 1968, vol. 15, pp. 341–46.10.1016/0022-5088(68)90193-8 ↗
15. F.J.J. Loo and G.D. Rieck: Acta Metall., 1973, vol. 21, pp. 61–71.10.1016/0001-6160(73)90220-4 ↗
16. I. Krafcsik, J. Gyulai, C.J. Palmstrom, and J.W. Mayer: Appl. Phys. Lett., 1983, vol. 43, pp. 1015–17.10.1063/1.94212 ↗
17. J. Kral, M. Ferdinandy, and D. Liska: Mater. Sci. Eng. A, 1991, vol. 140, pp. 479–85.10.1016/0921-5093(91)90466-Z ↗
18. Y. Du, Y.A. Chang, B.Y. Huang, W.P. Gong, Z.P. Jin, H.H. Xu, Z.H. Yuan, Y. Liu, Y.H. He, and F.Y. Xie: Mater. Sci. Eng. A, 2003, vol. 363, pp. 140–51.10.1016/S0921-5093(03)00624-5 ↗
19. M. Thuillard, L.T. Tran, and M.A. Nicolet: Thin Solid Films, 1988, vol. 166, pp. 21–27.10.1016/0040-6090(88)90362-8 ↗
20. H.B. Xu, Q. Han, and T.T. Meek: Mater. Sci. Eng. A, 2008, vol. 473, pp. 96–104.10.1016/j.msea.2007.04.040 ↗
21. G.I. Eskin: Ultrason. Sonochem., 1995, vol. 2, pp. 137–41.10.1016/1350-4177(95)00020-7 ↗