journal article·2012-05

Plastic Deformation in an Amorphous Ni-P Coating

Y. F. Shen, W. N. Liu, X. Sun, W. Y. Xue, Y. D. Wang, L. Zuo, P. K. Liaw

Publisher page

Abstract

An experimental and numerical investigation of the hardness and associated plastic deformation in as-deposited and as-annealed nickel-phosphorus (Ni-P) coatings was conducted. In addition to the indentation-deformation behavior, the deformation morphology underneath the indenter was examined. The yield strength extracted from the indentation data is as high as 5.6 GPa, indicating pressure-sensitive plasticity. Results show that the as-deposited Ni-P coating was deformed appreciably through the shear-band mechanism with semicircular and radial shear-band morphologies. From the incremental loading-unloading cyclic experiments, the phenomena on hardening and recovery, which have scarcely been recognized in amorphous materials at room temperature, were observed in the amorphous coating using instrumented nanoindentation. A numerical simulation of the interfacial indentation test between the Ni-P coating and the substrate reveals the pileup and shear bands of the Ni-P coating that were observed during the indentation tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. L. Guo, V.M. Swope, B. Merzougui, L. Protsailo, M.H. Shao, Q. Yuan, and G.M. Swain: J. Electrochem. Soc., 2010, vol. 157 (1), pp. A19–25.10.1149/1.3246410 ↗
2. A.E. Giannakopoulos, A. Kordolemis, and T. Zisis: J. Eng. Mater. Technol., 2010, vol. 132 (1), pp. 011009-1–011009-7.10.1115/1.3184037 ↗
3. W.N. Liu, X. Sun, E. Stephens, and M.A. Khaleel: J. Power Sources, 2009, vol. 189 (2), pp. 1044–50.10.1016/j.jpowsour.2008.12.143 ↗
4. W. Pang, H.C. Man, and T.M. Yue: Mater. Sci. Eng. A, 2005, vol. 390, pp. 144–53.10.1016/j.msea.2004.07.065 ↗
5. S.J. Kwon, S.H. Choo, and S.H Lee: Scripta Mater., 1998, vo l. 40, pp. 235–40.10.1016/S1359-6462(98)00430-8 ↗
6. M.C. Gui and S.B. Kang: Mater. Lett., 2000, vol. 46, pp. 296–302.10.1016/S0167-577X(00)00191-9 ↗
7. F.X. Liu, P.K. Liaw, W.H. Jiang, C.L. Chiang, Y.F. Gao, Y.F. Guan, J.P. Chu, and P.D. Rack: Mater. Sci. Eng. A, 2007, vols. 468–470, pp. 246–52.10.1016/j.msea.2006.09.099 ↗
8. C.L. Chiang, J.P. Chu, F.X. Liu, P.K. Liaw, and R.A. Buchanan: Appl. Phys. Lett., 2006, vol. 88, pp. 131902–08.10.1063/1.2189917 ↗
9. Z.X. Ping, Y.D. He, C.D. Gu, and T.Y. Zhang: Surf. Coat. Technol., 2008, vol. 202, pp. 6023–28.10.1016/j.surfcoat.2008.06.183 ↗
10. L. Chang, P.W. Kao, and C.H. Chen: Scripta Mater., 2007, vol. 56, pp. 713–16.10.1016/j.scriptamat.2006.12.036 ↗
11. N. El Mahallawy, A. Bakkar, M. Shoeib, H. Palkowski, and V. Neubert: Surf. Coat. Technol., 2008, vol. 202, pp. 5151–57.10.1016/j.surfcoat.2008.05.037 ↗
12. M.A. Meyers and K.K. Chawla: Mechanical Behavior of Materials, Prentice Hall, Inc., Upper Saddle River, NJ, 1999.
13. D.C. Hofmann, J.Y. Suh, A. Wiest, G. Duan, M.L. Lind, M.D. Demetriou, and W.L. Johnson: Nature, 2008, vol. 451, pp. 1085–89.10.1038/nature06598 ↗
14. J.W. Qiao, S. Wang, Y. Zhang, and P.K. Liaw: Appl. Phys. Lett., 2009, vol. 94, pp. 151905–08.10.1063/1.3118587 ↗
15. C.A. Schuh and T.G. Nieh: Acta Mater., 2003, vol. 51, pp. 87–99.10.1016/S1359-6454(02)00303-8 ↗
16. P.E. Donovan and W.M. Stobbs: Acta Metall., 1981, vol. 29, pp. 1419–36.10.1016/0001-6160(81)90177-2 ↗
17. S. Xie and E.P. George: Acta Mater., 2008, vol. 56, pp. 5202–13.10.1016/j.actamat.2008.07.009 ↗
18. F. Spaepen: Acta Metall., 1977, vol. 25, pp. 407–15.10.1016/0001-6160(77)90232-2 ↗
19. A.S. Argon: Acta Metall., 1979, vol. 27, pp. 47–58.10.1016/0001-6160(79)90055-5 ↗
20. P.S. Steif, F. Spaepen, and J.W. Hutchinson: Acta Metall., 1982, vol. 30, pp. 447–55.10.1016/0001-6160(82)90225-5 ↗
21. Y.F. Gao, B. Yang, and T.G. Nieh: Acta Mater., 2007, vol. 55, pp. 2319–27.10.1016/j.actamat.2006.11.027 ↗
22. Z.F. Zhang, J. Eckert, and L. Schultz: Acta Mater., 2003, vol. 51, pp. 1167–79.10.1016/S1359-6454(02)00521-9 ↗
23. K.M. Flores and R.H. Dauskardt: Acta Mater., 2001, vol. 49, pp. 2527–37.10.1016/S1359-6454(01)00125-2 ↗
24. Y.I. Golovin, V.I. Ivolgin, V.A. Khonik, K. Kitagawa, and A.I. Tyurin: Scripta Mater., 2001, vol. 45, pp. 947–52.10.1016/S1359-6462(01)01116-2 ↗
25. W.J. Wright, R. Saha, and W.D. Nix: Mater. Trans. JIM, 2001, vol. 42, pp. 642–49.10.2320/matertrans.42.642 ↗
26. A. Gouldstone, H.J. Koh, K.Y. Zeng, A.E. Giannakopoulos, and S. Suresh: Acta Mater., 2000, vol. 48, pp. 2277–95.10.1016/S1359-6454(00)00009-4 ↗
27. A. Gouldstone, K.J. VanVliet, and S. Suresh: Nature, 2001, vol. 411, p. 656.10.1038/35079687 ↗
28. J.J. Kim, Y. Choi, S. Suresh, and A.S. Argon: Science, 2002, vol. 295, pp. 654–57.10.1126/science.1067453 ↗
29. C.A. Schuh, T.C. Hufnagel, and U. Ramamurty: Acta Mater., 2007, vol. 55, pp. 4067–4109.10.1016/j.actamat.2007.01.052 ↗
30. F.Q. Yang, K.B. Geng, P.K. Liaw, G.J. Fan, and H. Choo: Acta Mater., 2007, vol. 55, pp. 321–27.10.1016/j.actamat.2006.06.063 ↗
31. F.X. Liu, Y.F. Gao, and P.K. Liaw: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1862–67.10.1007/s11661-007-9399-8 ↗
32. C.A. Schuh, T.G. Nieh, and Y. Kawamura: J. Mater. Res., 2002, vol. 17, pp. 1651–54.10.1557/JMR.2002.0243 ↗
33. C.A. Schuh and T.G. Nieh: Acta Mater., 2003, vol. 51, p. 87.10.1016/S1359-6454(02)00303-8 ↗
34. Y.F. Shen, W.Y. Xue, Z.Y. Liu, and L. Zuo: Surf. Coat. Technol., 2010, vol. 205, pp. 632–40.10.1016/j.surfcoat.2010.07.066 ↗
35. G.M. Pharr and W.C. Oliver: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
36. R. Schwaiger, B. Moser, M. Dao, N. Chollacoop, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 5159–72.10.1016/S1359-6454(03)00365-3 ↗
37. D.B. Lewis and G.W. Marshall: Surf. Coat. Technol., 1996, vol. 78, pp. 150–56.10.1016/0257-8972(94)02402-2 ↗
38. E. Bredael, B. Blanplain, J.P. Celis, and J.R. Roos: J. Electrochem. Soc., 1994, vol. 141, pp. 294–306.10.1149/1.2054703 ↗
39. Q.J. Zhou, J.Y. He, D.B. Sun, W.Y. Chu, and L.J. Qiao: Scripta Mater., 2006, vol. 54, pp. 603–08.10.1016/j.scriptamat.2005.10.035 ↗
40. U. Ramamurty, S. Jana, Y. Kawamura, and K. Chattopadhyay: Acta Mater., 2005, vol. 53, pp. 705–17.10.1016/j.actamat.2004.10.023 ↗
41. T. Burgess and M. Ferry: Mater. Today, 2009, vol. 12, pp. 24–32.10.1016/S1369-7021(09)70039-2 ↗
42. G.R. Anstis, P. Chantikul, B.R. Lawn, and D.B. Marshall: J. Am. Ceram. Soc., 1981, vol. 64, pp. 533–38.10.1111/j.1151-2916.1981.tb10320.x ↗
43. D. Weair, M.F. Ashby, J. Logan, and M.J. Weins: Acta Metall., 1971, vol. 19, pp. 779–88.10.1016/0001-6160(71)90134-9 ↗
44. S. Kobayashi, K. Maeda, and S. Takeuchi: Acta Metall., 1980, vol. 28, pp. 1641–52.10.1016/0001-6160(80)90017-6 ↗
45. B. Bozzini and M. Boniardi: Z. Metallkd., 1997, vol. 88, p. 493.
46. Y.F. Shen, W.Y. Xue, Y.D. Wang, Z.Y. Liu, and L. Zuo: Surf. Coat. Technol., 2008, vol. 202, pp. 5140–45.10.1016/j.surfcoat.2008.05.027 ↗
47. C.A. Klein and G.F. Cardinale: Proc. SPIE, Diamond Optics V, Albert Feldman and Sandor Holly, eds., vol. 1759, SPIE, San Diego, CA, 1992, pp. 178–93.
48. Product Data Bulletin, 441 Stainless Steel, UNS S44100 Preliminary Bulletin, AK Steel, http://www.aksteel.com/pdf/markets_products/Stainless/ferritic/441_Data_Bulletin.pdf.
49. Y. Zhou, U. Erb, K.T. Aust, and G. Palumbo: Scripta Mater., 2003, vol. 48, pp. 825–30.10.1016/S1359-6462(02)00511-0 ↗
50. C.W. Adegoke, C.S. Chang, and E.T. Selig: ABAQUS/Standard User’s Manual, Hibbitt, Karlsson and Sorensen Inc., Pawtucket, RI, 2002.
51. D. Kramer, H. Huang, M. Kriese, J. Robach, J. Nelson, and A. Wright: Acta Mater., 1998, vol. 47, pp. 333–43.10.1016/S1359-6454(98)00301-2 ↗
52. M.L. Weaver, R.D. Noebe, and M.J. Kaufman: Intermetallics, 1996, vol. 4, pp. 593–600.10.1016/0966-9795(96)00045-3 ↗
53. K.M. Flores and R.H. Dauskardt: Acta Mater., 2001, vol. 49, pp. 2527–37.10.1016/S1359-6454(01)00125-2 ↗
54. R. Bhowmick, R. Raghavan, K. Chattopadhyay, and U. Ramamurty: Acta Mater., 2006, vol. 54, pp. 4221–28.10.1016/j.actamat.2006.05.011 ↗
55. J.J. Lewandowski and A.L. Greer: Nat. Mater., 2006, vol. 5, pp. 15–18.10.1038/nmat1536 ↗
56. C.T. Liu, L. Heatherly, D.S. Easton, C.A. Carmichael, J.H. Schneibel, and C.H. Chen: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1811–20.10.1007/s11661-998-0004-6 ↗
57. T.C. Hufnagel, T. Jiao, Y. Li, L.Q. Xing, and K.T. Ramesh: J. Mater. Res., 2002, vol. 17, pp. 1441–45.10.1557/JMR.2002.0214 ↗