Fabrication of Nanostructured Medical-Grade Stainless Steel by Mechanical Alloying and Subsequent Liquid-Phase Sintering
Source abstract
Abstract
This article focuses on the microstructure of medical-grade P558 (ASTM F2581) stainless steel produced by mechanical alloying and liquid-phase sintering. Rietveld X-ray diffraction and transmission electron microscopy reflect that the mechanically alloyed stainless steel powder is a nanocrystal dispersed amorphous matrix composite. Mn-11.5 wt pct Si eutectic alloy as additive improves densification of the synthesized P558 alloy via liquid-phase sintering mechanism. X-ray mapping shows that after sintering at 1323 K (1050 °C) for 1 hour, a uniform distribution of dissolved Mn and Si is achieved. Moreover, the development of a nanostructured, fully austenitic stainless steel after sintering at the same temperature is realized by X-ray diffraction and transmission electron microscopy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metallic Glasses and Amorphous Alloys · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. R.M. German: Powder Metallurgy Science, 2nd ed., Metal Powder Industry Federation, 1994, pp. 99–109.
2. E. Klar and P.K. Samal: Powder Metallurgy Stainless Steels: Processing, Microstructures, and Properties, ASM International, Materials Park, OH, 2007, pp. 59–100.10.31399/asm.tb.pmsspmp.9781627083126 ↗
3. J.A.C. Miramontes, J.D.O.B. Sanchez, F.A. Calderon, A.M. Villafane, and J.G.C. Nava: J. Mater. Eng. Perform., 2010, vol. 19, pp. 880–84.10.1007/s11665-009-9544-1 ↗
4. M. Youseffi and K.Y. Chong: Powder Met., 2003, vol. 46, pp. 30–38.10.1179/003258903225010460 ↗
5. K. Yang and Y. Ren: Sci. Technol. Adv. Mater., 2010, vol. 11, pp. 1–13.10.1088/1468-6996/11/1/014105 ↗
6. U.I. Thomann and P.J. Uggowitzer: Wear, 2000, vol. 239, pp. 48–58.10.1016/S0043-1648(99)00372-5 ↗
7. M. Fini, A.N. Nicoli, P. Torricelli, G. Giavaresi, V. Borsari, H. Lenger, J. Bernauer, R. Giardino, R. Chiesa, and A. Cigada: Biomaterials. 2003, vol. 24, pp. 4929–39.10.1016/S0142-9612(03)00416-2 ↗
8. L. Montanaro, M. Cervellati, D. Campoccia, C. Renata Arciola: J. Mater. Sci.: Mater. Med., 2006, vol. 17, pp. 267–75.10.1007/s10856-006-7313-3 ↗
9. Y. Ren, H. Yang, K. Yang, and B. Zhang: Key Eng. Mater., 2007, vols. 342–343, pp. 605–08.10.4028/www.scientific.net/KEM.342-343.605 ↗
10. R.F.V.V. Jaimes, M.L.C.A. Afonso, S.O. Rogero, S.M.L. Agostinho, and C.A. Barbosa: Mater. Lett. 2010, vol. 64, pp. 1476–79.10.1016/j.matlet.2010.03.066 ↗
11. J. Buhagiar, L. Qian, and H. Dong: Surf. Coat. Technol. 2010, vol. 205, pp. 388–95.10.1016/j.surfcoat.2010.06.062 ↗
12. C. Suryanarayana: Progr. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
13. L. Lutterotti: MAUD CPD Newsletter (IUCr), 2000, no. 24.
14. R. Amini, M.J. Hadianfard, E. Salahinejad, M. Marasi, and T. Sritharan: J. Mater. Sci., 2009, vol. 44, pp. 136–48.10.1007/s10853-008-3117-9 ↗
15. M. Mendez, H. Mancha, M.M. Cisneros, G. Mendoza, J.I. Escalante, and H.F. Lopez: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3273–78.10.1007/s11661-002-0313-0 ↗
16. E. Ma and M. Atzomon: Mater. Chem. Phys., 1995, vol. 39, pp. 249–67.10.1016/0254-0584(94)01446-N ↗
17. E. Salahinejad, R. Amini, and M.J. Hadianfard: Powder Technol., 2012, vols. 215–216, pp. 247–53.10.1016/j.powtec.2011.10.012 ↗
18. E.P. Yelsukov, G.A. Dorofeev, A.V. Zagainov, N.F. Vildanova, and A.N. Maratkanova: Mater. Sci. Eng. A, 2004, vol. 369, pp. 16–22.10.1016/j.msea.2003.08.054 ↗
19. A.H. Taghvaei, M. Stoica, G. Vaughan, M. Ghaffari, S. Maleksaeedi, and K. Janghorban: J. Alloys Compd., 2012, vol. 512, pp. 85–93.10.1016/j.jallcom.2011.09.025 ↗
20. ASM Handbook: Alloy Phase Diagrams, vol. 3, ASM International, Materials Park, OH, 2003.
21. M.M. Cisneros, H.F. Lopez, H. Mancha, D. Vazquez, E. Valdes, G. Mendoza, and M. Mendez: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2139–44.10.1007/s11661-002-0045-1 ↗
22. K. Lu, Z.F. Dong, I. Bakonyi, and A. Cziraki: Acta Metall. Mater., 1995, vol. 43, pp. 2641–47.10.1016/0956-7151(94)00478-Z ↗
23. R. Amini, E. Salahinejad, E. Askari Bajestani, and M.J. Hadianfard: J. Alloys Compd., 2011, vol. 509, pp. 3252–56.10.1016/j.jallcom.2010.12.097 ↗