Directional Solidification and Liquidus Projection of the Sn-Co-Cu System
Source abstract
Abstract
This study investigates the Sn-Co-Cu ternary system, which is of interest to the electronics industry. Ternary Sn-Co-Cu alloys were prepared, their as-solidified microstructures were examined, and their primary solidification phases were determined. The primary solidification phases observed were Cu, Co, Co3Sn2, CoSn, CoSn2, Cu6Sn5, Co3Sn2, γ, and β phases. Although there are ternary compounds reported in this ternary system, no ternary compound was found as the primary solidification phase. The directional solidification technique was applied when difficulties were encountered using the conventional quenching method to distinguish the primary solidification phases, such as Cu6Sn5, Cu3Sn, and γ phases. Of all the primary solidification phases, the Co3Sn2 and Co phases have the largest compositional regimes in which alloys display them as the primary solidification phases. There are four class II reactions and four class III reactions. The reactions with the highest and lowest reaction temperatures are both class III reactions, and are L + CoSn2 + Cu6Sn5 = CoSn3 at 621.5 K (348.3 °C) and L + Co3Sn2 + CoSn = Cu6Sn5 at 1157.8 K (884.6 °C), respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. “Directive 2002/95/EC of the European Parliament and of the Council: On the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment,” Official J. Europ. Union, 2003, pp. L37/19–L37/23.
2. S.-W. Chen, C.-H. Wang, S.-K. Lin, and C.-N. Chiu: J. Mater. Sci.: Mater. Electron., 2007, vol. 18, pp. 19–37.10.1007/s10854-006-9010-x ↗
3. S.K. Kang, P. Gruber, and D.-Y. Shih: JOM, 2008, vol. 6, pp. 66–70.10.1007/s11837-008-0075-2 ↗
4. Y.K. Jee, J. Yu, K.W. Park, and T.S. Oh: J. Electron. Mater., 2009, vol. 38 (5), pp. 685–90.10.1007/s11664-008-0646-6 ↗
5. D.H. Kim, M.G. Cho, S.-K. Seo, and H.M. Lee: J. Electron. Mater., 2009, vol. 38 (1), pp. 39–45.10.1007/s11664-008-0529-x ↗
6. Y.-C. Huang and S.-W. Chen: J. Mater. Res., 2010, vol. 25 (12), pp. 2430–38.10.1557/jmr.2010.0314 ↗
7. Y.-C. Huang and S.-W. Chen: J. Electron. Mater., 2011, vol. 40 (1), pp. 62–70.10.1007/s11664-010-1386-y ↗
8. L. Liu, C. Andersson, J. Liu, and Y.C. Chan: Adv. Electron. Packag., 2003, vol. 1, pp. 141–45.
9. L. Liu, C. Andersson, and J. Liu: J. Electron. Mater., 2004, vol. 33 (9), pp. 935–39.10.1007/s11664-004-0019-8 ↗
10. C. Andersson, L. Liu, and J. Liu: 2006 Electronic System Integration Technol. Conf. Proc., IEEE, Piscataway, NJ, 2006, pp. 152–60.10.1109/ESTC.2006.279993 ↗
11. P. Sun, C. Andersson, X. Wei, Z. Cheng, D. Shangguan, and J. Liu: Mater. Sci. Eng. B, 2006, vol. 135, pp. 134–40.10.1016/j.mseb.2006.08.051 ↗
12. C. Andersson, P. Sun, and J. Liu: J. Alloy. Compd., 2008, vol. 457, pp. 97–105.10.1016/j.jallcom.2007.03.028 ↗
13. F. Gao, F. Cheng, H. Nishikawa, and T. Takemoto: Mater. Lett., 2008, vol. 62, pp. 2257–59.10.1016/j.matlet.2007.11.060 ↗
14. S.-W. Chen, Y.-K. Chen, H.-J. Wu, Y.-C. Huang, and C.-M. Chen: J. Electron. Mater., 2010, vol. 39 (11) pp. 2418–28.10.1007/s11664-010-1337-7 ↗
15. W. Zhu, H. Liu, J. Wang, H. Dong, and Z. Jin: J. Alloy. Compd., 2009, vol. 481, pp. 503–08.10.1016/j.jallcom.2009.03.025 ↗
16. S.K. Lin, C.-F. Yang, S.-H. Wu, and S.-W. Chen: J. Electron. Mater., 2008, vol. 37 (4), pp. 498–506.10.1007/s11664-008-0380-0 ↗
17. Y.-C. Huang, S.-W. Chen, C.-Y. Chou, and W. Gierlotka: J. Alloys Compd., 2009, vol. 477 (1–2), pp. 283–90.10.1016/j.jallcom.2008.10.156 ↗
18. S.-W. Chen, H.-J. Wu, Y.-C. Huang, and W. Gierlotka: J. Alloy. Compd., 2010, vol. 497 (1–2), pp. 110–17.10.1016/j.jallcom.2010.03.067 ↗
19. M. Jiang, J. Sata, I. Ohnuma, R. Kainuma, and K. Ishida: Comput. Coupling Phase Diag. Thermochem., 2004, vol. 28, pp. 213–20.10.1016/j.calphad.2004.08.001 ↗
20. W. Gierlotka, S.-W. Chen, and S.-K. Lin: J. Mater. Res., 2007, vol. 22 (11), pp. 3158–65.10.1557/JMR.2007.0396 ↗
21. T. Nishizawa and K. Ishida: J. Phase Equilibria, 1984, vol. 5 (2), pp. 161–65.
22. R.J. Schaffer and D.J. Lewis: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2775–83.10.1007/s11661-005-0273-2 ↗
23. C. Zhang, D. Ma, K.-S. Wu, H.-B. Cao, G.-P. Cao, S. Kou, Y.A. Chang, and X.-Y. Yan: Intermetallics, 2007, vol. 15, pp. 1395–1400.10.1016/j.intermet.2007.01.009 ↗
24. Y.-K. Chen: Master’s Thesis, National Tsing Hua University, Hsin-chu, Taiwan, 2009.
25. S.-W. Chen, C.-C. Huang, and J.-C. Lin: Chem. Eng. Sci., 1995, vol. 50 (3), pp. 417–31.10.1016/0009-2509(94)00244-L ↗
26. S.-C. Jeng and S.-W. Chen: Acta Mater., 1997, vol. 45 (12), pp. 4887–99.10.1016/S1359-6454(97)00189-4 ↗
27. W.J. Boettinger, U.R. Kattner, K.-W. Moon, and J. Perepezko: “DTA and Heat-Flux DSC Measurements of Alloy Melting and Freezing,” National Institute of Standards and Technology, Washington, DC, 2006.10.1016/B978-008044629-5/50005-7 ↗