Experimental Determination of Heat Transfer Across the Metal/Mold Gap in a Direct Chill (DC) Casting Mold—Part I: Effect of Gap Size and Mold Gas Type
Source abstract
Abstract
An experimental apparatus to determine the heat-transfer coefficient in the gap formed between the cast metal and the mold wall of a vertical direct chill (DC) casting mold is described. The apparatus simulates the conditions existing within the confines of the DC casting mold and measures the heat flux within the gap. Measurements were made under steady-state conditions, simulating the steady-state regime of the DC casting process. A range of casting parameters that may affect the heat transfer was tested using this apparatus. In the current article, the operation of the apparatus is described along with the results for the effect of gas type within the mold, and the size of the metal-mold gap formed during casting. The results show that the gas type and the gap size significantly affect the heat transfer within a DC casting mold. The measured heat fluxes for all the conditions tested were expressed as a linear correlation between the heat-transfer coefficient and the metal-mold gap size, and the fluxes can be used to estimate the heat transfer between the metal and the mold at any gap size. These results are compared to values reported in the literature and recommendations are made for the future reporting of the metal/mold heat-transfer coefficient for DC casting. The results for the effect of the other parameters tested are described in Part II of the article.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. D. Eskin: Physical Metallurgy of DC Casting of Aluminium Alloys, 1st ed., CRC Press/Taylor and Francis, Boca Raton, FL, 2008, pp. 1–18.
2. J. Sengupta, B.G. Thomas, and M.A. Wells: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 187–204.10.1007/s11661-005-0151-y ↗
3. J.F. Grandfield and P.T. McGlade: Mater. Forum, 1996, pp. 29–51.
4. J.M. Drezet, M. Rappaz, G.U. Gruen, and M. Gremaud: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1627–34.10.1007/s11661-000-0172-5 ↗
5. E.K. Jensen: Light Metals, K.J. McMinn, ed., TMS, Warrendale, PA, 1980, pp. 631–42.
6. D.C. Weckman and P. Niessen: Metall. Trans. B, Process Metall., 1982, vol. 13B, pp. 593–602.10.1007/BF02650017 ↗
7. P.W. Baker and J.F. Grandfield: Aluminium Cast House Technology Conference, P.R. Whiteley, ed., TMS, Warrendale, PA, 2001, pp. 195–204.
8. I.F. Bainbridge, J.A. Taylor, and A.K. Dahle: Light Metals, A.T. Taberaux, ed., TMS, Warrendale, PA, 2004, pp. 693–98.
9. S. Benum, A. Hakonsen, J.E. Hafsas, and J. Sivertsen: Light Metals, C.E. Eckart, ed., TMS, Warrendale, PA, 1999, pp. 737–42.
10. W.J. Bergmann: Metall. Trans., 1970, vol. 1, pp. 3361–64.10.1007/BF03037864 ↗
11. W.J. Bergmann: JOM, 1973, vol. 23, pp. 247–56.
12. W.J. Bergmann: Aluminium, 1975, vol. 51, pp. 336–39.
13. A. Mo, T. Rusten, H.J. Thevik, B.R. Henriksen, and E.K. Jensen: Light Metals, R. Huglen, ed., TMS, Warrendale, PA, 1997, pp. 667–74.
14. D.C. Weckman and P. Niessen: Z. Metallkd., 1983, vol. 74, pp. 709–15.
15. J.A. Hines: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 299–311.10.1007/s11663-004-0031-7 ↗
16. K. Ho and R.D. Pehlke: AFS Trans., 1983, vol. 91, pp. 689–98.
17. K. Ho and R.D. Pehlke: AFS Trans., 1984, vol. 92, pp. 587–98.
18. K. Ho and R.D. Pehlke: Metall. Trans. B, 1985, vol. 16B, pp. 585–94.10.1007/BF02654857 ↗
19. Y. Nishida, W. Droste, and S. Engler: Metall. Trans. B, 1986, vol. 17B, pp. 833–44.10.1007/BF02657147 ↗
20. S. Argyropoulos and H. Carletti: Metall. Mater. Trans. B, 2008, vol. 39B, pp. 457–68.10.1007/s11663-008-9143-9 ↗
21. M. Trovant and S. Argyropoulos: Light Metals, R. Huglen, ed., TMS, Warrendale, PA, 1997, pp. 927–31.
22. M. Trovant and S. Argyropoulos: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 75–86.10.1007/s11663-000-0132-x ↗
23. W.D. Griffiths, C.P. Hallam, and K. Kawai: 1st International Light Metals Technology Conference, A.K. Dahle, ed., 2003, pp. 149–54.
24. J.-M. Drezet, M. Rappaz, B. Carrupt, and M. Plata: Metall. Mater. Trans. B, 1995, vol. 26B, pp. 821–29.10.1007/BF02651729 ↗
25. H. Fossheim and E.E. Madsen: Light Metals, W.S. Peterson, ed., TMS, Warrendale, PA, 1979, pp. 695–720.
26. D.J.-P. Adenis, K.H. Coates, and D.V. Ragone: J. Inst. Met., 1962–1963, vol. 91, pp. 395–403.
27. E.D. Tarapore: Light Metals, P.G. Campbell, ed., TMS, Warrendale, PA, 1989, pp. 875–80.
28. J.F. Grandfield and P.W. Baker: Solidification Processing 1987, The Institute of Metals, London, U.K., 1987, pp. 257–58.
29. E.K. Jensen, S. Johansen, T. Bergstrom, and J.A. Bakken: Metall. Soc-AIME, New Orleans, LA, 1986, pp. 891–96.
30. J.F. Grandfield: Alum. Trans., 2000, vol. 3, pp. 41–51.
31. G. Dour, M. Dargusch, and C. Davidson: Int. J. Heat Mass Trans., 2006, vol. 49, pp. 1773–89.10.1016/j.ijheatmasstransfer.2005.10.045 ↗
32. C.T. Kidd: NASA Conference Publication, NASA, 1992, pp. 31–50.
33. A. Prasad and I.F. Bainbridge: Mater. Sci. Forum, 2010, vols. 654–656, pp. 783–86.10.4028/www.scientific.net/MSF.654-656.783 ↗
34. A. Sabau, K. Kuwana, S. Viswanathan, K. Saito, and L. Davis: Light Metals, A.T. Taberaux, ed., TMS, Warrendale, PA, 2004, pp. 667–72.
35. D. Mortensen: Metall. Mater. Trans. B, 1999, vol. 30B, pp.119–33.10.1007/s11663-999-0012-y ↗
36. J.M. Drezet, B. Commet, H.G. Fjaer, and B. Magnin: Ninth International Conference on Modelling of Casting, Welding and Advanced Soldification Processes, P.R. Sahm, P.N. Hansen, and J.G. Conley, eds., Shaker Verlag, Aachen, Germany, 2000, pp. 33–40.
37. J.F. Grandfield and P.T. McGlade: Mater. Forum, 1996, vol. 20, pp. 29–51.
38. K. Ho: Engineering Materials, University of Michigan, Ann Arbor, MI, 1985, p. 174.
39. N. Muto, N. Hayashi, and T. Uno: Sumitomo Light Met. Tech. Reports, 1996, vol. 37, pp. 180–84.
40. F.P. Incropera and D.P. Dewitt: Introduction to Heat Transfer, 3rd ed., Wiley, 1996, pp. 757–60.
41. J.B. Wiskel, H. Henein, and E. Maire: Can. Metall. Q., 2002, vol. 41, pp. 97–110.10.1179/000844302794406351 ↗