Through Thickness Microstructural and Texture Inhomogeneity Within Al Layers in ARB-Produced Al-Al(Sc) Layered Composite Sheets
Source abstract
Abstract
Alternatively layered composite sheets of commercially pure (99.8 pct purity) aluminum and an Al-0.3wtpctSc alloy (either in the supersaturated solid solution or age-hardened conditions) were generated through accumulative roll bonding for up to 5 cycles. The transverse sections of the sheets were examined to investigate the microstructure and texture inhomogeneities developed during the rolling process. Electron backscatter diffraction and transmission electron microscopy was used for this investigation. It was found that an inhomogeneous microstructure and texture was developed through the aluminum layers of the sheet thickness. The nature of inhomogeneities changes as the ARB bonding progresses to higher cycles. Microstructural inhomogeneities remain prominent in the first ARB cycle and diminish during the subsequent cycles. Texture inhomogeneities appear in different forms as rolling progresses. High frictional shear forces in the surface and in-plane shear forces across bonding interfaces derive these inhomogeneities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Y. M. Wang, M. W. Chen, F. H. Zhou and E. Ma, Nature 2002, vol. 419, pp. 912-915.10.1038/nature01133 ↗
2. Y. Saito, H. Utsunomiya, N. Tsuji and T. Sakai, Acta Mater 1999, vol. 47, pp. 579-583.10.1016/S1359-6454(98)00365-6 ↗
3. T. G. Langdon, J Mater Sci 2007, vol. 42, pp. 3388-3397.10.1007/s10853-006-1475-8 ↗
4. N. Tsuji, K. Shiotsuki and Y. Saito, Mater T Jim 1999, vol. 40, pp. 765-771.10.2320/matertrans1989.40.765 ↗
5. W. Wei, K. X. Wei and Q. B. Du, Mat Sci Eng a-Struct 2007, vol. 454, pp. 536-541.10.1016/j.msea.2006.11.063 ↗
6. A. Balyanov, J. Kutnyakova, N. A. Amirkhanova, V. V. Stolyarov, R. Z. Valiev, X. Z. Liao, Y. H. Zhao, Y. B. Jiang, H. F. Xu, T. C. Lowe and Y. T. Zhu, Scripta Mater 2004, vol. 51, pp. 225-229.10.1016/j.scriptamat.2004.04.011 ↗
7. M. K. Chung, Y. S. Choi, J. G. Kim, Y. M. Kim and J. C. Lee, Mat Sci Eng a-Struct 2004, vol. 366, pp. 282-291.10.1016/j.msea.2003.08.056 ↗
8. Y. Estrin and A. Vinogradov, Acta Mater 2013, vol. 61, pp. 782-817.10.1016/j.actamat.2012.10.038 ↗
9. M. Z. Quadir, O. Al-Buhamad, L. Bassman and M. Ferry, Acta Mater 2007, vol. 55, pp. 5438-5448.10.1016/j.actamat.2007.06.021 ↗
10. M. Z. Quadir, M. Ferry and P. R. Munroe, Scripta Mater 2011, vol. 64, pp. 1106-1109.10.1016/j.scriptamat.2011.02.032 ↗
11. T. Hausol, V. Maier, C. W. Schmidt, M. Winkler, H. W. Hoppel and M. Goken, Adv Eng Mater 2010, vol. 12, pp. 740-746.10.1002/adem.201000044 ↗
12. S. H. Lee, Y. Saito, N. Tsuji, H. Utsunomiya and T. Sakai, Scripta Mater 2002, vol. 46, pp. 281-285.10.1016/S1359-6462(01)01239-8 ↗
13. S. Ohsaki, S. Kato, N. Tsuji, T. Ohkubo and K. Hono, Acta Mater 2007, vol. 55, pp. 2885-2895.10.1016/j.actamat.2006.12.027 ↗
14. M. Eizadjou, A. K. Talachi, H. D. Manesh, H. S. Shahabi and K. Janghorban, Compos Sci Technol 2008, vol. 68, pp. 2003-2009.10.1016/j.compscitech.2008.02.029 ↗
15. M. C. Chen, H. C. Hsieh and W. T. Wu, J Alloy Compd 2006, vol. 416, pp. 169-172.10.1016/j.jallcom.2005.09.017 ↗
16. G. H. Min, J. M. Lee, S. B. Kang and H. W. Kim, Mater Lett 2006, vol. 60, pp. 3255-3259.10.1016/j.matlet.2006.03.001 ↗
17. E. Borhani, H. Jafarian, D. Terada, H. Adachi and N. Tsuji, Mater Trans 2012, vol. 53, pp. 72-80.10.2320/matertrans.MD201125 ↗
18. E. Borhani, H. Jafarian, A. Shibata and N. Tsuji, Mater Trans 2012, vol. 53, pp. 1863-1869.10.2320/matertrans.MA201223 ↗
19. M. Z. Quadir, M. Ferry, O. Al-Buhamad and P. R. Munroe, Acta Mater 2009, vol. 57, pp. 29-40.10.1016/j.actamat.2008.08.056 ↗
20. N. Tsuji, Y. Saito, S. H. Lee and Y. Minamino, Adv Eng Mater 2003, vol. 5, pp. 338-344.10.1002/adem.200310077 ↗
21. Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai and R. G. Hong, Scripta Mater 1998, vol. 39, pp. 1221-1227.10.1016/S1359-6462(98)00302-9 ↗
22. N. Tsuji, R. Ueji and Y. Minamino, Scripta Mater 2002, vol. 47, pp. 69-76.10.1016/S1359-6462(02)00088-X ↗
23. H. W. Kim, S. B. Kang, N. Tsuji and Y. Minamino, Metall Mater Trans A 2005, vol. 36A, pp. 3151-3163.10.1007/s11661-005-0086-3 ↗
24. S. Li, F. Sun and H. Li, Acta Mater 2010, vol. 58, pp. 1317-1331.10.1016/j.actamat.2009.10.036 ↗
25. B. L. Li, N. Tsuji and N. Kamikawa, Materials Science and Engineering A 2006, vol. 423, pp. 331-342.10.1016/j.msea.2006.02.028 ↗
26. N. Kamikawa, T. Sakai and N. Tsuji, Acta Mater 2007, vol. 55, pp. 5873-5888.10.1016/j.actamat.2007.07.002 ↗
27. N. Kamikawa, N. Tsuji and Y. Minamino, Sci Technol Adv Mat 2004, vol. 5, pp. 163-172.10.1016/j.stam.2003.10.018 ↗
28. D. N. Seidman, E. A. Marquis and D. C. Dunand, Acta Mater 2002, vol. 50, pp. 4021-4035.10.1016/S1359-6454(02)00201-X ↗
29. P. W. Trimby, Ultramicroscopy 2012, vol. 120, pp. 16-24.10.1016/j.ultramic.2012.06.004 ↗
30. P. B. Prangnell, J. S. Hayes, J. R. Bowen, P. J. Apps and P. S. Bate, Acta Mater 2004, vol. 52, pp. 3193-3206.10.1016/j.actamat.2004.03.019 ↗
31. W. Truszkowski, J. Krol and B. Major, Metall Trans A 1980, vol. 11, pp. 749-758.10.1007/BF02661204 ↗
32. W. Truszkowski, J. Krol and B. Major, Metall Trans A 1982, vol. 13, pp. 665-669.10.1007/BF02644432 ↗
33. T. Sakai, Y. Saito, K. Hirano and K. Kato, T Iron Steel I Jpn 1988, vol. 28, pp. 1028-1035.10.2355/isijinternational1966.28.1028 ↗
34. G.W. Rowe: An Introduction to the Principles of Metalworking, Edward Arnold Publishing Ltd, London, 1972.
35. M. R. Toroghinejad, R. Jamaati, M. Hoseini, J. A. Szpunar and J. Dutkiewicz, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2013, vol. 44, pp. 1587-1598.10.1007/s11661-012-1503-z ↗
36. T. Kamijo, H. Adachihara, H. Fukutomi and E. Aernoudt, Acta Metall Mater 1992, vol. 40, pp. 693-698.10.1016/0956-7151(92)90010-C ↗
37. C. S. Lee, R. E. Smallman and B. J. Duggan, Mater Sci Tech Ser 1994, vol. 10, pp. 149-154.10.1179/mst.1994.10.2.149 ↗
38. I. L. Dillamore and H. Katoh, Met Sci J 1974, vol. 8, pp. 73-83.10.1179/msc.1974.8.1.73 ↗
39. J. Hirsch and K. Lücke, Acta Metallurgica 1988, vol. 36, pp. 2863-2882.10.1016/0001-6160(88)90172-1 ↗
40. J. Hirsch and K. Lücke, Acta Metallurgica 1988, vol. 36, pp. 2883-2904.10.1016/0001-6160(88)90173-3 ↗
41. J. Hirsch, K. Lücke and M. Hatherly, Acta Metallurgica 1988, vol. 36, pp. 2905-2927.10.1016/0001-6160(88)90174-5 ↗
42. P. Van Houtte, S. Li, M. Seefeldt and L. Delannay, International Journal of Plasticity 2005, vol. 21, pp. 589-624.10.1016/j.ijplas.2004.04.011 ↗