journal article·2021-05Open access

In-Situ High-Energy X-ray Diffraction Study of Austenite Decomposition During Rapid Cooling and Isothermal Holding in Two HSLA Steels

Sen Lin, Ulrika Borggren, Andreas Stark, Annika Borgenstam, Wangzhong Mu, Peter Hedström

Abstract

Abstract In-situ high-energy X-ray diffraction experiments with high temporal resolution during rapid cooling (280 °C s−1) and isothermal heat treatments (at 450 °C, 500 °C, and 550 °C for 30 minutes) were performed to study austenite decomposition in two commercial high-strength low-alloy steels. The rapid phase transformations occurring in these types of steels are investigated for the first time in-situ, aiding a detailed analysis of the austenite decomposition kinetics. For the low hardenability steel with main composition Fe-0.08C-1.7Mn-0.403Si-0.303Cr in weight percent, austenite decomposition to polygonal ferrite and bainite occurs already during the initial cooling. However, for the high hardenability steel with main composition Fe-0.08C-1.79Mn-0.182Si-0.757Cr-0.094Mo in weight percent, the austenite decomposition kinetics is retarded, chiefly by the Mo addition, and therefore mainly bainitic transformation occurs during isothermal holding; the bainitic transformation rate at the isothermal holding is clearly enhanced by lowered temperature from 550 °C to 500 °C and 450 °C. During prolonged isothermal holding, carbide formation leads to decreased austenite carbon content and promotes continued bainitic ferrite formation. Moreover, at prolonged isothermal holding at higher temperatures some degenerate pearlite form.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285-303.10.1016/j.cossms.2004.10.002 ↗
2. M. Sudo, M. Higashi, H. Hori, T. Iwai, S. Kambe and Z. Shibata: Trans. Iron Steel Inst. Jpn., 1981, vol. 21, pp. 820-827.10.2355/isijinternational1966.21.820 ↗
3. K. Sugimoto, J. Sakaguchi, T. Iida and T. Kashima: ISIJ Int., 2000, vol. 40, pp. 920-926.10.2355/isijinternational.40.920 ↗
4. Z.Z. Zhao, H.X. Yin, A.M. Zhao, Z.Q. Gong, J.G. He, T.T. Tong and H.J. Hu: Mater. Sci. Eng. A, 2014, vol. 613, pp. 8-16.10.1016/j.msea.2014.06.090 ↗
5. M. Sudo, S. Hashimoto and S. Kambe: Trans. Iron Steel Inst. Jpn., 1983, vol. 23, pp. 303-311.10.2355/isijinternational1966.23.303 ↗
6. B.S. Levy, M. Gibbs and C.J. Van Tyne: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3635-3648.10.1007/s11661-013-1718-7 ↗
7. K. Rakha, H. Beladi, I. Timokhina, X. Xiong, S. Kabra, K.-D. Liss and P. Hodgson: Mater. Sci. Eng. A, 2013, vol. 589, pp. 303-309.10.1016/j.msea.2013.09.055 ↗
8. I.B. Timokhina, K.D. Liss, D. Raabe, K. Rakha, H. Beladi, X.Y. Xiong and P. D. Hodgson: J. Appl. Crystallogr., 2016, vol. 49, pp. 399-414.10.1107/S1600576716000418 ↗
9. S.D. Catteau, H.P. Van Landeghem, J. Teixeira, J. Dulcy, M. Dehmas, S. Denis, A. Redjaïmia and M. Courteaux: J. Alloys Compd., 2015, vol. 658, pp. 832-838.10.1016/j.jallcom.2015.11.007 ↗
10. R.K. Dutta, R.M. Huizenga, M. Amirthalingam, A. King, H. Gao, M.J.M. Hermans, J. Sietsma and I.M. Richardson: Metall. Mater. Trans. A, 2014, vol. 45, pp. 218-229.10.1007/s11661-013-1992-4 ↗
11. R. Rementeria, J.A. Jimenez, S.Y.P. Allain, G. Geandier, J.D. Poplawsky, W. Guo, E. Urones-Garrote, C. Garcia-Mateo and F.G. Caballero: Acta Mater., 2017, vol. 133, pp. 333-345.10.1016/j.actamat.2017.05.048 ↗
12. P. Kolmskog, A. Borgenstam, M. Hillert, P. Hedström, S.S. Babu, H. Terasaki and Y.-I. Komizo: Metall. Mater. Trans. A, 2012, vol. 43, pp. 4984-4988.10.1007/s11661-012-1342-y ↗
13. S.S. Babu, E.D. Specht, S.A. David, E. Karapetrova, P. Zschack, M. Peet and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2005, vol. 36, pp. 3281-3289.10.1007/s11661-005-0002-x ↗
14. F.G. Caballero, M.K. Miller, C. Garcia-Mateo, J. Cornide and M.J. Santofimia: Scr. Mater., 2012, vol. 67, pp. 846-849.10.1016/j.scriptamat.2012.08.007 ↗
15. P. Jacques, E. Girault, T. Catlin, N. Geerlofs, T. Kop, S. van der Zwaag and F. Delannay: Mater. Sci. Eng. A, 1999, vol. 273-275, pp. 475-479.10.1016/S0921-5093(99)00331-7 ↗
16. N. Takayama, G. Miyamoto and T. Furuhara: Acta Mater., 2018, vol. 145, pp. 154-164.10.1016/j.actamat.2017.11.036 ↗
17. N. Yurioka: ISIJ Int., 2001, vol. 41, pp. 566-570.10.2355/isijinternational.41.566 ↗
18. A. Stormvinter, A. Borgenstam and J. Ågren: Metall. Mater. Trans. A, 2012, vol. 43, pp. 3870-3879.10.1007/s11661-012-1171-z ↗
19. L. Leach, P. Kolmskog, L. Höglund, M. Hillert and A. Borgenstam: Metall. Mater. Trans. A, 2018, vol. 49, pp. 4509-4520.10.1007/s11661-018-4819-5 ↗
20. M. Rahaman, W. Mu, J. Odqvist and P. Hedström: Metall. Mater. Trans. A, 2019, vol. 50, pp. 2081-2091.10.1007/s11661-019-05170-8 ↗
21. A.P. Hammersley, S.O. Svensson and A. Thompson: Nucl. Instrum. Methods Phys. Res. Sect. A, 1994, vol. 346, pp. 312-321.10.1016/0168-9002(94)90720-X ↗
22. A.P. Hammersley, S.O. Svensson, M. Hanfland, A.N. Fitch and D. Häusermann: High Pressure Res., 1996, vol. 14, pp. 235-248.10.1080/08957959608201408 ↗
23. G. Esteves, K. Ramos, C.M. Fancher and J.L. Jones: LIPRAS: Line-Profile Analysis Software, 2017.
24. ASTM International Standard A. E975-13, West Conshohocken, 2013.
25. N. van Dijk, A. Butt, L. Zhao, J. Sietsma, S. Offerman, J. Wright and S. van der Zwaag: Acta Mater., 2005, vol. 53, pp. 5439-5447.10.1016/j.actamat.2005.08.017 ↗
26. K. Zhu, D. Barbier, and T. Iung: J. Mater. Sci, 2013, vol. 48, pp. 413-423.10.1007/s10853-012-6756-9 ↗
27. S.M.C. van Bohemen: Scr. Mater., 2013, vol. 69, pp. 315-318.10.1016/j.scriptamat.2013.05.009 ↗
28. F. Bachmann, R. Hielscher, and H. Schaeben: Ultramicroscopy, 2011, vol. 111, pp. 1720-1733.10.1016/j.ultramic.2011.08.002 ↗
29. A. Gazder, F. Al-Harbi, H. Spanke, D. Mitchell, and E. Pereloma: Ultramicroscopy, 2014, vol. 147, pp. 114-132.10.1016/j.ultramic.2014.07.005 ↗
30. J.-O. Andersson, T. Helander, L. Höglund, P. Shi and B. Sundman: Calphad, 2002, vol. 26, pp. 273-312.10.1016/S0364-5916(02)00037-8 ↗
31. A. Borgenstam, L. Höglund, John Ågren, and Anders Engström: J. Phase Equilibria., 2000, vol. 21, pp. 269-280.10.1361/105497100770340057 ↗
32. H. Larsson and L. Höglund: Calphad, 2009, vol. 33, pp. 495-501.10.1016/j.calphad.2009.06.004 ↗
33. S. Shrestha, A. Breen, P. Trimby, G. Proust, S. Ringer, and J. Cairney: Ultramicroscopy, 2014, vol.137, pp. 40-47.10.1016/j.ultramic.2013.11.003 ↗
34. P. Cizek, B. Wynne, C. Davies, and P. Hodgson: Metall. Mater. Trans. A, 2014, vol. 46A, pp. 407-425.
35. D.R. Black, D.A. Windover, A. Henins, J.J. Filliben and J.P. Cline: Powder Diffr., 2011, vol. 26, pp. 155-158.10.1154/1.3591064 ↗
36. L. Cheng, A. Böttger, Th.H. de Keijser and E.J. Mittemeijer: Scr. Metall. Mater., 1990, vol. 24, pp. 509-514.10.1016/0956-716X(90)90192-J ↗
37. M. Onink, C.M. Brakman, F.D. Tichelaar, E.J. Mittemeijer, S. van der Zwaag, J.H. Root and N.B. Konyer: Scr. Metall. Mater., 1993, vol. 29, pp. 1011-1016.10.1016/0956-716X(93)90169-S ↗
38. I.A. Yakubtsov and J.D. Boyd: Mater. Sci. Technol., 2001, vol. 17, pp. 296-301.10.1179/026708301773002491 ↗
39. L. Jiang, R.K.W. Marceau, T. Dorin, P.D. Hodgson, and N. Stanford: J. Mater. Sci., 2019, vol.54, pp. 1769-1784.10.1007/s10853-018-2908-x ↗
40. S.M. Chentouf, M. Jahazi, L.-P. Lapierre-Boire and S. Godlin: Metallogr. Microstruct. Anal., 2014, vol. 3, pp. 281-297.10.1007/s13632-014-0142-8 ↗
41. M.G. Mecozzi, J. Sietsma, and S. van der Zwaag: Acta Mater., 2006, vol. 54, pp. 1431-1440.10.1016/j.actamat.2005.11.014 ↗
42. T. Furuhara, T. Yamaguchi, G. Miyamoto, and T. Maki: Mater. Sci. Technol., 2010, vol. 26, pp. 392-397.10.1179/026708309X12512744 ↗
43. K.Hausmann, D.Krizan, K.Spiradek-Hahn, A.Pichler, and E.Werner: Mater. Sci. Eng., A, 2013, vol. 588, pp. 142-150.10.1016/j.msea.2013.08.023 ↗
44. T. Sourmail and V. Smanio: Acta Mater., 2013, vol. 61, pp. 2639-2648.10.1016/j.actamat.2013.01.044 ↗
45. M. Zhou, G. Xu, J. Tian, H. Hu and Q. Yuan: Metals, 2017, vol. 7, pp. 7.
46. E.S. Humphreys, H.A. Fletcher, J.D. Hutchins, A.J. Garratt-Reed, W.T. Reynolds Jr., H.I. Aaronson, G.R. Purdy and G.D.W. Smith: Metall. Mater. Trans. A, 2004, vol. 35, pp. 1223-1235.10.1007/s11661-004-0296-0 ↗
47. J. Kong and C. Xie: Mater. Des., 2005, vol. 27, pp. 1169-1173.10.1016/j.matdes.2005.02.006 ↗
48. A.M. Ravi, A. Kumar, M. Herbig, J. Sietsma and MJ. Santofimia: Acta Mater., 2020, vol. 188, pp. 424-434.10.1016/j.actamat.2020.01.065 ↗
49. D. Quidort and Y.J.M. Brechet: Acta Mater., 2001, vol. 49, pp. 4161-4170.10.1016/S1359-6454(01)00316-0 ↗
50. K. Zhu, H. Chen, J.-P. Masse, O. Bouaziz and G. Gachet: Acta Mater., 2013, vol. 61, pp. 6025-6036.10.1016/j.actamat.2013.06.043 ↗
51. J. Yin, M. Hillert and A. Borgenstam: Metall. Mater. Trans. A, 2017, vol. 48, pp. 1425-1443.10.1007/s11661-016-3903-y ↗
52. T. Furuhara, K. Tsuzumi, G. Miyamoto, T. Amino, and G. Shigesato: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5990-5996.10.1007/s11661-014-2584-7 ↗