journal article·2020-12

Role of Solid–Solid Interfacial Energy Anisotropy in the Formation of Broken Lamellar Structures in Eutectic Systems

Sumeet Khanna, Shanmukha Kiran Aramanda, Abhik Choudhury

Publisher page

Abstract

Eutectic solidification gives rise to a wide range of microstructures. A commonly observed morphology is the periodic arrangement of lamellar plates with well-defined orientations of the solid–solid interface in a given eutectic grain. It is typically believed that this form of morphology develops due to the presence of solid–solid interfacial energy anisotropy. In this paper, we provide evidence using phase-field simulations where our focus is on alloys where the minority phase fraction is low. Our aim is to establish the role of solid–solid interfacial energy anisotropy in the stabilization of broken lamellar structures in such systems in contrast to the formation of a rod microstructure. In this regard, we conduct phase-field simulations for different strengths of anisotropy in both constrained and extended settings, using which we clarify the mechanisms by which a lamellar arrangement gets stabilized in the presence of anisotropy in the solid–solid interfacial energy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. W. Kurz, D.J. Fisher: Fundamentals of Solidification, vol 1. Trans Tech Publications, Aedermannsdorf (1986)
2. Dantzig J.A., Rappaz M. (2009) Solidification. EPFL Press, Lausanne10.1201/9781439808030 ↗
3. G.A. Chadwick: Prog. Mater. Sci. 1963, vol. 12, pp. 99–182.10.1016/0079-6425(63)90037-9 ↗
4. J. Hunt, K. Jackson, Trans. Metall. Soc. AIME 236(6), 843–52 (1966)
5. R. Elliott, Eutectic Solidification Processing: Crystalline and Glassy Alloys. Elsevier, Amsterdam (2013)
6. M. Croker, R. Fidler, R. Smith, Proc. R. Soc. Lond. A 335, 15–37 (1973)10.1098/rspa.1973.0111 ↗
7. K. Kassner, C. Misbah, Phys. Rev. A 44, 6513 (1991)10.1103/PhysRevA.44.6513 ↗
8. U. Hecht, L. Gránásy, T. Pusztai, B. Böttger, M. Apel, V. Witusiewicz, L. Ratke, J. De Wilde, L. Froyen, D. Camel, et al.: Mater. Sci. Eng. R 2004, vol. 46, pp. 1–49.10.1016/j.mser.2004.07.002 ↗
9. A. Karma, M. Plapp: JOM 2004, vol. 56, pp. 28–32.10.1007/s11837-004-0069-7 ↗
10. H. Walker, S. Liu, J. Lee, R. Trivedi: Metall. Mater. Trans. A 2007, vol. 38, pp. 1417–25.10.1007/s11661-007-9163-0 ↗
11. A. Parisi, M. Plapp: Acta Mater. 2008, vol. 56, pp. 1348–57.10.1016/j.actamat.2007.11.037 ↗
12. M. Perrut, S. Akamatsu, S. Bottin-Rousseau, G. Faivre: Phys. Rev. E 2009, vol. 79, pp. 032602.10.1103/PhysRevE.79.032602 ↗
13. M. Asta, C. Beckermann, A. Karma, W. Kurz, R. Napolitano, M. Plapp, G. Purdy, M. Rappaz, R. Trivedi: Acta Mater. 2009, vol. 57, pp. 941–71.10.1016/j.actamat.2008.10.020 ↗
14. S. Akamatsu, M. Plapp: Curr. Opin. Solid State Mater. Sci. 2016, vol. 20, pp. 46–54.10.1016/j.cossms.2015.10.002 ↗
15. R. Contieri, C. Rios, M. Zanotello, R. Caram: Mater. Charact. 2008, vol. 59, pp. 693–99.10.1016/j.matchar.2007.05.025 ↗
16. A. Dennstedt, L. Ratke: Trans. Indian Inst. Met. 2012, vol. 65, pp. 777–82.10.1007/s12666-012-0172-3 ↗
17. A. Choudhury: Trans. Indian Inst. Met. 2015, vol. 68, pp. 1137–43.10.1007/s12666-015-0659-9 ↗
18. J. Hötzer, M. Jainta, P. Steinmetz, B. Nestler, A. Dennstedt, A. Genau, M. Bauer, H. Köstler, U. Rüde: Acta Mater. 2015, vol. 93, pp. 194–204.10.1016/j.actamat.2015.03.051 ↗
19. J. Hötzer, P. Steinmetz, M. Jainta, S. Schulz, M. Kellner, B. Nestler, A. Genau, A. Dennstedt, M. Bauer, H. Köstler, et al.: Acta Mater. 2016, vol. 106, pp. 249–59.10.1016/j.actamat.2015.12.052 ↗
20. P. Steinmetz, J. Hötzer, M. Kellner, A. Dennstedt, B. Nestler: Comput. Mater. Sci. 2016, vol. 117, pp. 205–14.10.1016/j.commatsci.2016.02.001 ↗
21. K. A. Jackson, J. D. Hunt: Trans. Metall. Soc. AIME 1966, vol. 236, pp. 1129–42.
22. M. Taylor, R. Fidler, R. Smith: J. Cryst. Growth 1968, vol. 3, pp. 666–73.10.1016/0022-0248(68)90242-X ↗
23. T. Digges, R. Tauber: Metall. Trans. 1971, vol. 2, pp. 1683–89.10.1007/BF02913894 ↗
24. H. Kerr, M. Lewis: J. Cryst. Growth 1972, vol. 15, pp. 117–25.10.1016/0022-0248(72)90132-7 ↗
25. T. Digges Jr, R. Tauber: J. Cryst. Growth 1971, vol. 8, pp. 132–34.10.1016/0022-0248(71)90034-0 ↗
26. M. Savas, L. Clapham, R. Smith: J. Mater. Sci. 1990, vol. 25, pp. 909–13.10.1007/BF03372178 ↗
27. H. Kerr, W. Winegard: Can. Metall. Q. 1967, vol. 6, pp. 67–70.10.1179/cmq.1967.6.1.67 ↗
28. M. Taylor, R. Fidler, R. Smith: Metall. Trans. 1971, vol. 2, pp. 1793–98.10.1007/BF02913407 ↗
29. M. Şahin, E. Çadirli: J. Mater. Sci. Mater. Electron. 2012, vol. 23, pp. 484–92.10.1007/s10854-011-0422-x ↗
30. J. Bromley, F. Vnuk, R. Smith: J. Mater. Sci. 1983, vol. 18, pp. 3143–53.10.1007/BF00700799 ↗
31. G. Piatti, G. Pellegrini: Journal of Materials Science 1976, vol. 11 (5), pp. 913–924.10.1007/BF00542310 ↗
32. G. Beghi, G. Piatti, K. Street: J. Mater. Sci. 1971, vol. 6, pp. 118–25.10.1007/BF00550341 ↗
33. M. Notis, D. Shah, S. Young, C. Graham: IEEE Trans. Magn. 1979, vol. 15, pp. 957–66.10.1109/TMAG.1979.1060288 ↗
34. M. Sahoo, G. Delamore, R. Smith: J. Mater. Sci. 1980, vol. 15, pp. 1097–1103.10.1007/BF00551797 ↗
35. G. Nishimura, R. Fidler, M. Taylor, R. Smith: Can. Metall. Q. 1969, vol. 8, pp. 319–22.10.1179/cmq.1969.8.4.319 ↗
36. P. Taylor, H. Kerr, W. Winegard: Can. Metall. Q. 1964, vol. 3, pp. 235–37.10.1179/cmq.1964.3.3.235 ↗
37. D. Jaffrey, G. Chadwick: Metall. Trans. 1970, vol. 1, pp. 3389–96.10.1007/BF03037869 ↗
38. F. Vnuk, M. Sahoo, D. Baragar, R. Smith: J. Mater. Sci. 1980, vol. 15, pp. 2573–83.10.1007/BF00550762 ↗
39. H. Kaya, M. Gündüz, E. Çadirli, O. Uzun: J. Mater. Sci. 2004, vol. 39, pp. 6571–76.10.1023/B:JMSC.0000044897.98694.be ↗
40. H. Kaya, E. Çadırlı, M. Gündüz: J. Mater. Eng. Perform. 2003, vol. 12, pp. 456–69.10.1361/105994903770343024 ↗
41. Y. Goto, M. Kurosaki, H. Esaka: J. Jpn Inst. Met. 2011, vol. 75, pp. 392–97.10.2320/jinstmet.75.392 ↗
42. M. Şahin, F. Karakurt: Physica B 2018, vol. 545, pp. 48–54.10.1016/j.physb.2018.06.003 ↗
43. K. Sharma, R. Rai: Thermochim. Acta 2012, vol. 535, pp. 66–70.10.1016/j.tca.2012.02.020 ↗
44. B. Caroli, C. Caroli, G. Faivre, J. Mergy: J. Cryst. Growth, vol. 118, pp. 135–50 (1992)10.1016/0022-0248(92)90058-Q ↗
45. A. Valance, C. Misbah, D. Temkin, K. Kassner: Phys. Rev. E, vol. 48, pp. 1924 (1993)10.1103/PhysRevE.48.1924 ↗
46. S. Bottin-Rousseau, M. Şerefolu, S. Akamatsu, G. Faivre: IOP Conf. Ser. Mater. Sci. Eng. 27, 012088 (2012)10.1088/1757-899X/27/1/012088 ↗
47. S. Akamatsu, S. Bottin-Rousseau, M. Şerefoğlu, G. Faivre: Acta Mater. 2012, vol. 60, pp. 3199–3205.10.1016/j.actamat.2012.02.031 ↗
48. S. Akamatsu, S. Bottin-Rousseau, M. Şerefoğlu, G. Faivre: Acta Mater. 2012, vol. 60, pp. 3206–14.10.1016/j.actamat.2012.02.033 ↗
49. S. Ghosh, A. Choudhury, M. Plapp, S. Bottin-Rousseau, G. Faivre, S. Akamatsu: Phys. Rev. E, 91, 022407 (2015).10.1103/PhysRevE.91.022407 ↗
50. S. Ghosh, M. Plapp: Acta Mater. 2017, vol. 140, pp. 140–48.10.1016/j.actamat.2017.08.023 ↗
51. L. Rátkai, G. I. Tóth, L. Környei, T. Pusztai, L. Gránásy: J. Mater. Sci. 2017, vol. 52, pp. 5544–5558.10.1007/s10853-017-0853-8 ↗
52. A. Choudhury, B. Nestler: Phys. Rev. E, 85, 021602 (2012).10.1103/PhysRevE.85.021602 ↗
53. M. Plapp: Phys. Rev. E, 84, 031601 (2011).10.1103/PhysRevE.84.031601 ↗
54. R. Kobayashi: Physica D 1993, vol. 63, pp. 410–23.10.1016/0167-2789(93)90120-P ↗
55. J. J. Eggleston, G. B. McFadden, P. W. Voorhees: Physica D 2001, vol. 150, pp. 91–103.10.1016/S0167-2789(00)00222-0 ↗
56. P. Mathis: J. Indian Inst. Sci. 2016, vol. 96, pp. 179–98.
57. I. Ansara, A. Dinsdale, M. Rand (1998) Cost 507: Thermochemical Database for Light Metal Alloys. Vol. 2, Office for Official Publications of the European Communities, Luxembourg.
58. A. Choudhury, M. Kellner, B. Nestler: Curr. Opin. Solid State Mater. Sci. 2015, vol. 19, pp. 287–300.10.1016/j.cossms.2015.03.003 ↗
59. J.-O. Andersson, T. Helander, L. Höglund, P. Shi, B. Sundman: CALPHAD 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
60. J. Pstruś: J. Min. Metall. B 2017, vol. 53, pp. 309–18.10.2298/JMMB170728037P ↗
61. The HDF Group: Hierarchical Data Format, Version 5. http://www.hdfgroup.org/HDF5/1997-NNNN.
62. J. Ahrens, B. Geveci, C. Law: The Visualization Handbook, vol. 717. Academic, New York (2005)
63. Ayachit, U., The Paraview Guide: A Parallel Visualization Application. Kitware, Inc., New York (2015)
64. J. D. Hunter, Comput. Sci. Eng., 9, 90 (2007).10.1109/MCSE.2007.55 ↗
65. S. Van der Walt, J. L. Schönberger, J. Nunez-Iglesias, F. Boulogne, J. D. Warner, N. Yager, E. Gouillart, T. Yu: PeerJ 2014, vol. 2, pp. e453.10.7717/peerj.453 ↗
66. D. Wheeler, D. Brough, T. Fast, S. Kalidindi, and A. Reid: PyMKS: materials knowledge system in Python, 2014
67. D. B. Brough, D. Wheeler, S. R. Kalidindi: Integr. Mater. Manuf. Innov. 2017, vol. 6, pp. 36–53.10.1007/s40192-017-0089-0 ↗
68. A. Parisi, M. Plapp: Europhys. Lett., 90, 26010 (2010).10.1209/0295-5075/90/26010 ↗
69. A. Vondrous, M. Selzer, J. Hötzer, B. Nestler, Int. J. High Perform. Comput. Appl. 28, 61–72 (2014)10.1177/1094342013490972 ↗
70. B. Saatçi, N. Maraşlı, M. Gündüz: Thermochim. Acta 2007, vol. 454, pp. 128–134.10.1016/j.tca.2007.01.009 ↗
71. J. Hoshen, R. Kopelman: Phys. Rev. B, 14, 3438 (1976).10.1103/PhysRevB.14.3438 ↗