journal article·2020-08

Strain-Rate Sensitivity, Tension-Compression Asymmetry, r-Ratio, Twinning, and Texture Evolution of a Rolled Magnesium Alloy Mg-1.3Zn-0.4Ca-0.4Mn

Evgenii Vasilev, Nicholas C. Ferreri, Ray Decker, Irene J. Beyerlein, Marko Knezevic

Publisher page

Abstract

In this work, the deformation response, texture evolution, and twinning development of a magnesium (Mg) alloy, Mg-1.3Zn-0.4Ca-0.4Mn, for biocompatible applications are investigated. Further, the alloy’s formability, by examining the instantaneous r-ratio and strain-rate sensitivity (SRS) as a function of strain and loading direction, is investigated. It is found that after rolling and peak aging, the alloy has a rolled texture of moderate intensity with the basal planes contained in the rolling plane and with a bimodal, fine-grained microstructure. The alloy shows both high room-temperature tensile strength (300 MPa) and ductility (25 pct) in the rolling direction (RD) and, remarkably, r-ratios saturating close to unity in all three in-plane testing directions. It is also found that the SRS is relatively high and uniform, with averages ranging from 0.015 to 0.025, depending on the in-plane testing directions. These are outstanding properties compared to pure Mg and most of its biocompatible alloys. Typical of Mg alloys, this alloy has a propensity for twinning by multiple twin modes, which leads to rapid texture evolution, anisotropy, and tension-compression (T-C) asymmetry in yield stress, with compression having the weaker response. These mechanical characteristics along with their microstructural origins are presented and discussed in this article.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. M.P. Staiger, A.M. Pietak, J. Huadmai, and G. Dias: Biomaterials, 2006, vol. 27, p. 1728.10.1016/j.biomaterials.2005.10.003 ↗
2. G.L. Song and A. Atrens: Adv. Eng. Mater., 1999, vol. 1, p. 11.10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N ↗
3. F. Witte: Acta Biomater., 2010, vol. 6, p. 1680.10.1016/j.actbio.2010.02.028 ↗
4. H. Hussl, C. Papp, I. Hopfelkreiner, E. Rumpl, and P. Wilflingseder: Chir. Plast., 1981, vol. 6, p. 117.10.1007/BF00289636 ↗
5. H. Haferkamp, M. Niemeyer, R. Boehm, U. Holzkamp, C. Jaschik, and V. Kaese: Magnesium Alloys 2000, 2000, vol. 350 (3), p. 31–41.10.4028/www.scientific.net/MSF.350-351.31 ↗
6. Y. Shimizu, A. Yamamoto, T. Mukai, Y. Shirai, M. Kano, T. Kudo, H. Kanetaka, and M. Kikuchi: Interface Oral Health Science 2009, 2010, p. 318.
7. E. Zhang and L. Yang: Mater. Sci. Eng. A, 2008, vol. 497, p. 111.10.1016/j.msea.2008.06.019 ↗
8. J. Chen, L. Tan, X. Yu, I.P. Etim, M. Ibrahim, and K. Yang: J. Mech. Behav. Biomed. Mater., 2018, vol. 87, p. 68.10.1016/j.jmbbm.2018.07.022 ↗
9. C.J. Bettles, M. Gibson, and K. Venkatesan: Scripta Mater., 2004, vol. 51, p. 193.10.1016/j.scriptamat.2004.04.020 ↗
10. H. Bakhsheshi-Rad, M. Idris, M. Abdul-Kadir, A. Ourdjini, M. Medraj, M. Daroonparvar, and E. Hamzah: Mater. Des., 2014, vol. 53, p. 283.10.1016/j.matdes.2013.06.055 ↗
11. C. Cáceres and A. Blake: Physica Status Solidi (a), 2002, vol. 194, p. 147.10.1002/1521-396X(200211)194:1<147::AID-PSSA147>3.0.CO;2-L ↗
12. D.H. Cho, J.H. Nam, B.W. Lee, K.M. Cho, and I.M. Park: J. Alloys Compd., 2016, vol. 676, p. 461.10.1016/j.jallcom.2016.03.182 ↗
13. K. Oh-Ishi, R. Watanabe, C. Mendis, and K. Hono: Mater. Sci. Eng. A, 2009, vol. 526, p. 177.10.1016/j.msea.2009.07.027 ↗
14. F. Rosalbino, S. De Negri, G. Scavino, and A. Saccone: J. Biomed. Mater. Res. Part A, 2013, vol. 101, p. 704.10.1002/jbm.a.34368 ↗
15. N.C. Ferreri, S. Ghorbanpour, S. Bhowmik, R. Lussier, J. Bicknell, B.M. Patterson, and M. Knezevic: Int. J. Plast., 2019, vol. 121, p. 116.10.1016/j.ijplas.2019.06.002 ↗
16. M. Jahedi, M. Knezevic, and M. Paydar: J. Mater. Eng. Perform., 2015, vol. 24, p. 1471.10.1007/s11665-015-1426-0 ↗
17. X. Gao and J.F. Nie: Scripta Mater., 2007, vol. 56, p. 645.10.1016/j.scriptamat.2007.01.006 ↗
18. B. Zhang, L. Geng, L. Huang, X. Zhang, and C. Dong: Scripta Mater., 2010, vol. 63, p. 1024.10.1016/j.scriptamat.2010.07.038 ↗
19. T. Homma, J. Hinata, and S. Kamado: Phil. Mag., 2012, vol. 92, p. 1569.10.1080/14786435.2011.652692 ↗
20. J.-F. Nie: Metall. Mater. Trans. A, 2012, vol. 43A, p. 3891.10.1007/s11661-012-1217-2 ↗
21. R. Decker, S. LeBeau, D. LaCroix, S. Makiheni, and J. Allison: Springer International Publishing, Cham, 2018, p. 115−23.10.1007/978-3-319-72332-7_18 ↗
22. R. Decker, S. Lebeau, and S. Young: U.S. Patent No. 10,022,470, 2018.
23. B. Zhang, Y. Hou, X. Wang, Y. Wang, and L. Geng: Mater. Sci. Eng.: C, 2011, vol. 31, p. 1667.10.1016/j.msec.2011.07.015 ↗
24. R. Ahmad, B. Yin, Z. Wu, and W. Curtin: Acta Mater., 2019, vol. 172, p. 161.10.1016/j.actamat.2019.04.019 ↗
25. S. Zhang, X. Zhang, C. Zhao, J. Li, Y. Song, C. Xie, H. Tao, Y. Zhang, Y. He, and Y. Jiang: Acta Biomater., 2010, vol. 6, p. 626.10.1016/j.actbio.2009.06.028 ↗
26. H.-X. Li, S.-K. Qin, Y.-Z. Ma, J. Wang, Y.-J. Liu, and J.-S. Zhang: Int. J. Miner. Metall. Mater. 2018, vol. 25, p. 800.10.1007/s12613-018-1628-1 ↗
27. J. Hofstetter, S. Rüedi, I. Baumgartner, H. Kilian, B. Mingler, E. Povoden-Karadeniz, S. Pogatscher, P.J. Uggowitzer, and J.F. Löffler: Acta Mater., 2015, vol. 98, p. 423.10.1016/j.actamat.2015.07.021 ↗
28. S.L. Mannan, S.C. Chetal, Baldev Raj, and S.B. Bhoje: Selection of Materials for Prototype Fast Breeder Reactor, Indian Institute of Metals, Calcutta, India, 2003.
29. Y. Ding, C. Wen, P. Hodgson, and Y. Li: J. Mater. Chem. B, 2014, vol. 2, p. 1912.10.1039/C3TB21746A ↗
30. P. Jardim, G. Solorzano, and J. Vander Sande: Mater. Sci. Eng. A, 2004, vol. 381, p. 196.10.1016/j.msea.2004.04.043 ↗
31. S.A. Khan, Y. Miyashita, Y. Mutoh, and Z.B. Sajuri: Mater. Sci. Eng.: A, 2006, vol. 420, p. 315.10.1016/j.msea.2006.01.091 ↗
32. F. Witte, N. Hort, C. Vogt, S. Cohen, K.U. Kainer, R. Willumeit, and F. Feyerabend: Curr. Opin. Solid State Mater. Sci., 2008, vol. 12, p. 63.10.1016/j.cossms.2009.04.001 ↗
33. J. Wang, J. Zhang, X. Zong, C. Xu, Z. You, and K. Nie: Mater. Sci. Eng. A, 2015, vol. 648, p. 37.10.1016/j.msea.2015.09.046 ↗
34. J.A. Helsen and H.J. Breme: Metals as Biomaterials, Wiley, Hoboken, NJ, 1998.
35. F. Baruthio, O. Guillard, J. Arnaud, F. Pierre, and R. Zawislak: Clin. Chem., 1988, vol. 34, p. 227.10.1093/clinchem/34.2.227 ↗
36. M. Aschner, T.R. Guilarte, J.S. Schneider, and W. Zheng: Toxicol. Appl. Pharmac., 2007, vol. 221, p. 131.10.1016/j.taap.2007.03.001 ↗
37. S.R. Agnew: in Advances in Wrought Magnesium Alloys: Fundamentals of Processing, Properties and Applications, C. Bettles and M. Barnett, eds., 2012, p. 63–104.10.1533/9780857093844.1.63 ↗
38. M. Lentz, M. Klaus, I.J. Beyerlein, M. Zecevic, W. Reimers, and M. Knezevic: Acta Mater., 2015, vol. 86, p. 254.10.1016/j.actamat.2014.12.003 ↗
39. M. Jahedi, B.A. McWilliams, P. Moy, and M. Knezevic: Acta Mater., 2017, vol. 131, p. 221.10.1016/j.actamat.2017.03.075 ↗
40. M. Jahedi, B.A. McWilliams, and M. Knezevic: Mater. Sci. Eng. A, 2018, vol. 726, p. 194.10.1016/j.msea.2018.04.090 ↗
41. S. Ghorbanpour, B.A. McWilliams, and M. Knezevic: Mater. Sci. Eng. A, 2019, vol. 747, p. 27.10.1016/j.msea.2019.01.056 ↗
42. S. Ghorbanpour, B.A. McWilliams, and M. Knezevic: Fatig. Fract. Eng. Mater. Struct., 2019, vol. 42, p. 1357.10.1111/ffe.12992 ↗
43. D. Nugmanov, M. Knezevic, M. Zecevic, O. Sitdikov, M. Markushev, and I.J. Beyerlein: Mater. Sci. Eng. A, 2018, vol. 713, p. 81.10.1016/j.msea.2017.12.045 ↗
44. W.F. Hosford and R.M. Caddell: Metal Forming: Mechanics and Metallurgy, Cambridge University Press, New York, NY, 2011.10.1017/CBO9780511976940 ↗
45. T.J. Barrett and M. Knezevic: Comput. Meth. Appl. Mech. Eng., 2019, vol. 354, p. 245.10.1016/j.cma.2019.05.035 ↗
46. M. Zecevic and M. Knezevic: Mech. Mater., 2019, vol. 136, p. 103065.10.1016/j.mechmat.2019.103065 ↗
47. M. Zecevic, I.J. Beyerlein, and M. Knezevic: Int. J. Plast., 2017, vol. 93, p. 187.10.1016/j.ijplas.2016.07.016 ↗
48. M.E. Alam, S. Pal, R. Decker, N.C. Ferreri, M. Knezevic, and I.J. Beyerlein: Sci. Rep., 2020.
49. L. Tong, M. Zheng, S. Xu, S. Kamado, Y. Du, X. Hu, K. Wu, W. Gan, H. Brokmeier, and G. Wang: Mater. Sci. Eng. A, 2011, vol. 528, p. 3741.10.1016/j.msea.2011.01.037 ↗
50. S.W. Xu, K. Oh-ishi, H. Sunohara, and S. Kamado: Mater. Sci. Eng. A, 2012, vol. 558, p. 356.10.1016/j.msea.2012.08.012 ↗
51. M. Jiang, C. Xu, T. Nakata, H. Yan, R. Chen, and S. Kamado: J. Alloys Compd., 2016, vol. 668, p. 13.10.1016/j.jallcom.2016.01.195 ↗
52. Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA, 2015.
53. D.H. Smith, J. Bicknell, L. Jorgensen, B.M. Patterson, N.L. Cordes, I. Tsukrov, and M. Knezevic: Mater. Charact., 2016, vol. 113, p. 1.10.1016/j.matchar.2016.01.003 ↗
54. S. Gribbin, J. Bicknell, L. Jorgensen, I. Tsukrov, and M. Knezevic: Int. J. Fatig., 2016, vol. 93, Part 1, p. 156–67.10.1016/j.ijfatigue.2016.08.019 ↗
55. S. Gribbin, S. Ghorbanpour, N.C. Ferreri, J. Bicknell, I. Tsukrov, and M. Knezevic: Mater. Charact., 2019, vol. 149, p. 184.10.1016/j.matchar.2019.01.028 ↗
56. G. Huang, B. Yan, and Z. Xia: SAE Int. J. Mater. Manufact., 2011, vol. 4, p. 385.10.4271/2011-01-0234 ↗
57. W. Wang, J. Han, X. Yang, M. Li, P. Wan, L. Tan, Y. Zhang, and K. Yang: Mater. Sci. Eng.: B, 2016, vol. 214, p. 26.10.1016/j.mseb.2016.08.005 ↗
58. S. Agarwal, J. Curtin, B. Duffy, and S. Jaiswal: Mater. Sci. Eng.: C, 2016, vol. 68, p. 948.10.1016/j.msec.2016.06.020 ↗
59. M. Lentz, M. Klaus, M. Wagner, C. Fahrenson, I.J. Beyerlein, M. Zecevic, W. Reimers, and M. Knezevic: Mater. Sci. Eng. A, 2015, vol. 628, p. 396.10.1016/j.msea.2015.01.069 ↗
60. Y. Guo, S. Zhang, I.J. Beyerlein, D. Legut, S.-L. Shang, Z. Liu, and R. Zhang: Acta Mater., 2019, vol. 181, p. 423.10.1016/j.actamat.2019.09.059 ↗
61. S. Yi, J. Bohlen, F. Heinemann, and D. Letzig: Acta Mater., 2010, vol. 58, p. 592.10.1016/j.actamat.2009.09.038 ↗
62. Y. Chino, K. Sassa, A. Kamiya, and M. Mabuchi: Mater. Sci. Eng.: A, 2006, vol. 441, p. 349.10.1016/j.msea.2006.08.038 ↗
63. V. Livescu, C.M. Cady, E.K. Cerreta, B.L. Henrie, and G.T. Gray: Essential Readings in Magnesium Technology, Springer, New York, NY, 2016, p. 375.10.1007/978-3-319-48099-2_60 ↗
64. R.B. Figueiredo, F.S. Poggiali, C.L. Silva, P.R. Cetlin, and T.G. Langdon: J. Mater. Sci., 2016, vol. 51, p. 3013.10.1007/s10853-015-9612-x ↗
65. Y. Chun and C. Davies: Mater. Sci. Eng. A, 2011, vol. 528, p. 5713.10.1016/j.msea.2011.04.059 ↗
66. X. Lin and D. Chen: J. Mater. Eng. Perform., 2008, vol. 17, p. 894.10.1007/s11665-008-9247-z ↗
67. M.H. Yoo: Metall. Trans. A, 1981, vol. 12A, p. 409.10.1007/BF02648537 ↗
68. M. Knezevic, A. Levinson, R. Harris, R.K. Mishra, R.D. Doherty, and S.R. Kalidindi: Acta Mater., 2010, vol. 58, p. 6230.10.1016/j.actamat.2010.07.041 ↗
69. W.H. Hartt and R.E. Reed-Hill: Trans. TMS-AIME, 1967, vol. 239, p. 1511.
70. B.C. Wonsiewicz and W.A. Backofen: Trans. TMS-AIME, 1967, vol. 239.
71. M. Ardeljan, I.J. Beyerlein, B.A. McWilliams, and M. Knezevic: Int. J. Plast., 2016, vol. 83, p. 90.10.1016/j.ijplas.2016.04.005 ↗
72. M. Risse, M. Lentz, C. Fahrenson, W. Reimers, M. Knezevic, and I.J. Beyerlein: Metall. Mater. Trans. A, 2017, vol. 48A, p. 446.10.1007/s11661-016-3780-4 ↗
73. M. Knezevic, M. Zecevic, I.J. Beyerlein, J.F. Bingert, and R.J. McCabe: Acta Mater., 2015, vol. 88, p. 55.10.1016/j.actamat.2015.01.037 ↗
74. M. Knezevic, L. Capolungo, C.N. Tomé, R.A. Lebensohn, D.J. Alexander, B. Mihaila, and R.J. McCabe: Acta Mater., 2012, vol. 60, p. 702.10.1016/j.actamat.2011.10.041 ↗
75. M. Knezevic, M.R. Daymond, and I.J. Beyerlein: Scripta Mater., 2016, vol. 121, p. 84.10.1016/j.scriptamat.2016.04.026 ↗
76. T.J. Barrett, R.J. McCabe, D.W. Brown, B. Clausen, S.C. Vogel, and M. Knezevic: J. Mech. Phys. Solids, 2020, vol. 138, p. 103924.10.1016/j.jmps.2020.103924 ↗
77. J.A. García-Grajales, A. Fernández, D. Leary, and A. Jérusalem: Comput. Mater. Sci., 2016, vol. 115, p. 41.10.1016/j.commatsci.2015.12.046 ↗
78. H. Wang, P. Wu, S. Kurukuri, M.J. Worswick, Y. Peng, D. Tang, and D. Li: Int. J. Plast., 2018, vol. 107, p. 207.10.1016/j.ijplas.2018.04.005 ↗
79. H. Watanabe and K. Ishikawa: Mater. Sci. Eng. A, 2009, vol. 523, p. 304.10.1016/j.msea.2009.06.019 ↗