Competitive Healing of Creep-Induced Damage in a Ternary Fe-3Au-4W Alloy
Source abstract
Abstract
Abstract Autonomous healing of creep-induced grain boundary cavities by Au-rich and W-rich precipitates was studied in a Fe-3Au-4W (wt pct) alloy at a fixed temperature of 823 K (550 °C) with different applied stresses. The ternary alloy, with two supersaturated healing solutes, serves as a model system to study the interplay between two separate healing agents. The creep properties are evaluated and compared with those of the previously studied Fe-Au and Fe-W binary systems. The microstructures of the creep-failed samples are studied by electron microscopy to investigate the cavity filling behavior and the mass transfer of supersaturated solute to the defect sites. Compared to the Fe-Au and Fe-W alloys, the new Fe-Au-W alloy has the lowest steady-state strain rate and the longest lifetime. The site-selective filling of the creep-induced cavities is attributed to two different categories of precipitates: micron-sized Au-rich precipitates and nano-sized W-rich precipitates. The Au-rich precipitates are found capable to fully heal the cavities, while the W-rich precipitates show only a limited degree of healing. The two types of precipitates show a reluctance to coexistence, and the formation of W-rich precipitates is suppressed strongly. A model is proposed to describe the competitive healing behavior of the Au-rich and W-rich precipitates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. F. R. N. Nabarro and H. L. de Villiers (2018) Physics of Creep and Creep-Resistant Alloys. CRC Press, Boca Raton.
2. K. Maruyama, K. Sawada and J. Koike: ISIJ Int., 2001, vol. 41, pp. 641-53.10.2355/isijinternational.41.641 ↗
3. M. Taneike, F. Abe and K. Sawada: Nature, 2003, vol. 424, pp. 294-96.10.1038/nature01740 ↗
4. M. D. Hager, P. Greil, C. Leyens, S. van der Zwaag and U. S. Schubert: Adv. Mater., 2010, vol. 22, pp. 5424-30.10.1002/adma.201003036 ↗
5. B. Grabowski and C. Tasan: Self-healing Materials, Springer International Publishing, Cham, 2016, pp. 387-407.10.1007/12_2015_337 ↗
6. Niels van Dijk and Sybrand van der Zwaag: Adv. Mater. Interfaces, 2018, vol. 5, p.1800226.10.1002/admi.201800226 ↗
7. R. N. Lumley, A. J. Morton and I. J. Polmear, Acta Mater., 2002, vol. 50, pp. 3597-608.10.1016/S1359-6454(02)00164-7 ↗
8. R. N. Lumley and I. J. Polmear, In Proceedings of the First International Conference on Self Healing Materials, (Noordwijk aan Zee 2007).
9. K. Laha, J. Kyono, S. Kishimoto and N. Shinya: Scr. Mater., 2005, vol. 52, pp. 675-78.10.1016/j.scriptamat.2004.11.016 ↗
10. K. Laha, J. Kyono, T. Sasaki, S. Kishimoto and N. Shinya: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 399-409.10.1007/s11661-005-0311-0 ↗
11. N. Shinya, J. Kyono and K. Laha: J. Intel. Mat. Syst. Str., 2016, vol. 17, pp. 1127-33.10.1177/1045389X06065238 ↗
12. S. M. He, N. H. van Dijk, H. Schut, E. R. Peekstok and S. van der Zwaag: Phys. Rev. B, 2010, vol. 81, p. 094103.10.1103/PhysRevB.81.094103 ↗
13. S. van der Zwaag and E. Brinkman: Self Healing Materials: Pioneering Research in the Netherlands, Amsterdam: IOS Press, 2015.
14. S. Zhang, J. Kohlbrecher, F. D. Tichelaar, G. Langelaan, E. Brück, S. van der Zwaag and N. H. van Dijk: Acta Mater., 2013, vol. 61, pp. 7009-19.10.1016/j.actamat.2013.08.015 ↗
15. S. Zhang, G. Langelaan, J. C. Brouwer, W. G. Sloof, E. Brück, S. van der Zwaag and N. H. van Dijk: J. Alloys Comp., 2014, vol. 584, pp. 425-29.10.1016/j.jallcom.2013.09.011 ↗
16. S. Zhang, H. Fang, M. E. Gramsma, C. Kwakernaak, W. G. Sloof, F. D. Tichelaar, M. Kuzmina, M. Herbig, D. Raabe, E. Brück, S. van der Zwaag and N. H. van Dijk: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 4831-44.10.1007/s11661-016-3642-0 ↗
17. S. Zhang, C. Kwakernaak, W. Sloof, E. Brück, S. van der Zwaag and N. H. van Dijk: Adv. Eng. Mater., 2015, vol. 17, pp. 598-603.10.1002/adem.201400511 ↗
18. H. Fang, N. Szymanski, C. D. Versteylen, P. Cloetens, C. Kwakernaak, W. G. Sloof, F. D. Tichelaar, S. Balachandran, M. Herbig, E. Brück, S. van der Zwaag and N. H. van Dijk: Acta Mater., 2019, vol. 166, pp. 531-42.10.1016/j.actamat.2019.01.014 ↗
19. H. Fang, C. D. Versteylen, S. Zhang, Y. Yang, P. Cloetens, D. Ngan-Tillard, E. Brück, S. van der Zwaag and N. H. van Dijk: Acta Mater., 2016, vol. 121, pp. 352-64.10.1016/j.actamat.2016.09.023 ↗
20. S. Zhang, C. Kwakernaak, F. D. Tichelaar, W. G. Sloof, M. Kuzmina, M. Herbig, D. Raabe, E. Brück, S. van der Zwaag and N. H. van Dijk: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 5656-70.10.1007/s11661-015-3169-9 ↗
21. S. M. He, P. N. Brandhoff, H. Schut, S. van der Zwaag and N. H. van Dijk: J. Mater. Sci., 2013, vol. 48, pp. 6150-56.10.1007/s10853-013-7411-9 ↗
22. S. Zhang, J. Cizek, Z. Yao, M. Oleksandr, X. Kong, C. Liu, N. H. van Dijk and S. van der Zwaag: J. Alloys Comp., 2019, doi: 10.1016/j.jallcom.2019.152765.10.1016/j.jallcom.2019.152765 ↗
23. C. D. Versteylen, M. H. F. Sluiter and N. H. van Dijk: J. Mater. Sci., 2018, vol. 53, pp. 14758-73.10.1007/s10853-018-2666-9 ↗
24. O. D. Sherby, Acta Metall., 1962, vol. 10, pp. 135-47.10.1016/0001-6160(62)90058-5 ↗
25. J.S. Zhang (2010) High Temperature Deformation and Fracture of Materials. Sawston: Woodhead Publishing.10.1533/9780857090805 ↗
26. C. D. Versteylen, N. H. van Dijk and M. H. F. Sluiter: Phys. Rev. B, 2017, vol. 96, p. 094105.10.1103/PhysRevB.96.094105 ↗
27. G. Stechauner and E. Kozeschnik: J. Mater. Eng. Perform., 2014, vol. 23, pp. 1576-79.10.1007/s11665-014-0921-z ↗
28. C. D. Versteylen, N. K. Szymański, M. H. F. Sluiter and N. H. van Dijk: Philos. Mag., 2018, vol. 98, pp. 864-77.10.1080/14786435.2017.1418097 ↗