First-Principles Investigation of Thermodynamic Decomposition of Interfacial Oxides in Hot Compression Bonding
Source abstract
Abstract
The removal of interfacial oxides is essential in solid-state bonding to obtain high-performance joints. A recent work reported that the dissolution of MnCr2O4 at the hot compression bonding (HCB) interface of 316LN stainless steel improved the mechanical properties of joints. The evolution behaviors of interfacial oxides behind it should be further understood. In this study, the thermodynamic stability of MnCr2O4 and decomposition mechanisms of interfacial oxides in HCB was studied by combining the first-principles calculations with thermodynamics approach. The results obtained within GGA + U method were compared with experiments and in a good agreement with previous calculated results. The predicted stability region of MnCr2O4 was built by drawing the Mn-Cr-O phase diagram. The transition of its possibly coexisting binary oxides was understood in detail with respect to the environmental conditions. The interfacial oxides evolution in HCB process was proposed based on the variation of oxygen chemical potential. It predicted that MnCr2O4 forms during the heating period of HCB with the presence of binary oxides of Mn and Cr. All possible interfacial oxides decompose into metal phases and oxygen atoms when $$ \Delta \mu_{\text{O}} $$ is below − 386.97 kJ/mol.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. N. F. Kazakov: Diffusion Bonding of Materials, 1st ed, Pergamon Press, Oxford, 1985, pp. 17-48.10.1016/B978-0-08-032550-7.50006-0 ↗
2. J. Y. Zhang, M. Y. Sun, B. Xu and D. Z. Li: Metall. Mater. Trans. B, 2018, vol. 49, pp. 2152-62.10.1007/s11663-018-1313-9 ↗
3. B. J. Xie, M. Y. Sun, B. Xu, C. Y. Wang, D. Z. Li and Y. Y. Li: Mater. Des., 2018, vol. 157, pp. 437-46.10.1016/j.matdes.2018.08.003 ↗
4. R. Jamaati and M. R. Toroghinejad: Mater. Des., 2010, vol. 31, pp. 4508-13.10.1016/j.matdes.2010.04.022 ↗
5. N. F. Kazakov: Diffusion Bonding of Materials, 1st ed, Pergamon Press, Oxford, 1985, pp. 244-48.
6. Z. C. Zhu, Y. He, X. J. Zhang, H. Y. Liu and X. Li: Mater. Sci. Eng. A, 2016, vol. 669, pp. 344-49.10.1016/j.msea.2016.05.066 ↗
7. S. Koyama, M. Takahashi and K. Ikeuchi: Mater. Trans., 2004, vol. 45, pp. 300-02.10.2320/matertrans.45.300 ↗
8. N. Malik, P. A. Carvalho, E. Poppe and T. G. Finstad: J. Appl. Phys., 2016, vol. 119, pp. 205303.10.1063/1.4952709 ↗
9. Z. A. Munir: J. Mater. Sci., 1979, vol. 14, pp. 2733-40.10.1007/BF00610647 ↗
10. Y. Takahashi, T. Nakamura and K. Nishiguchi: J. Mater. Sci., 1992, vol. 27, pp. 485-98.10.1007/BF00543942 ↗
11. N. Sridharan, D. Isheim, D. N. Seidman and S. S. Babu: Scr. Mater., 2017, vol. 130, pp. 196-99.10.1016/j.scriptamat.2016.11.040 ↗
12. A. A. Shirzadi, H. Assadi and E. R. Wallach: Surf. Interface Anal., 2001, vol. 31, pp. 609-18.10.1002/sia.1088 ↗
13. K. Ikeuchi, F. Matsuda and K. Kotani: Weld Int, 1996, vol. 10, pp. 697-704.10.1080/09507119609549073 ↗
14. G. Q. Xie, O. Ohashi, M. H. Song, K. Mitsuishi and K. Furuya: Appl. Surf. Sci., 2005, vol. 241, pp. 102-06.
15. H. Shibata, T. Tanaka, K. Kimura and S. Y. Kitamura: Ironmaking Steelmaking, 2010, vol. 37, pp. 522-28.10.1179/030192310X12700328925903 ↗
16. C. S. Liu, K. H. Kim, S. J. Kim, J. S. Li, S. Ueda, X. J. Gao, H. Shibata and S. Kitamura: Metall. Mater. Trans. B, 2015, vol. 46, pp. 1875-84.10.1007/s11663-015-0356-4 ↗
17. K. H. Kim, S. J. Kim, H. Shibata and S. Kitamura: ISIJ Int., 2014, vol. 54, pp. 2144-53.10.2355/isijinternational.54.2144 ↗
18. E. A. Ahmad, L. Liborio, D. Kramer, G. Mallia, A. R. Kucernak and N. M. Harrison: Phys. Rev. B, 2011, vol. 84, pp. 085137.10.1103/PhysRevB.84.085137 ↗
19. E. Heifets, E. A. Kotomin, A. A. Bagaturyants and J. Maier: J. Phys. Chem. Lett., 2015, vol. 6, pp. 2847-51.10.1021/acs.jpclett.5b01071 ↗
20. L. Wang, T. Maxisch and G. Ceder: Chem. Mat., 2007, vol. 19, pp. 543-52.10.1021/cm0620943 ↗
21. Y. Jiang, Y. L. Shi, X. G. Xiang, J. Q. Qi, Y. Han, Z. J. Liao and T. C. Lu: Phys. Rev. Appl., 2019, vol. 11, pp. 054088.10.1103/PhysRevApplied.11.054088 ↗
22. L. M. Liborio, C. L. Bailey, G. Mallia, S. Tomic and N. M. Harrison: J. Appl. Phys., 2011, vol. 109, pp. 023519.10.1063/1.3544206 ↗
23. H. X. Xu, D. Lee, J. He, S. B. Sinnott, V. Gopalan, V. Dierolf and S. R. Phillpot: Phys. Rev. B, 2008, vol. 78, pp. 174103.10.1103/PhysRevB.78.174103 ↗
24. K. Reuter and M. Scheffler: Phys. Rev. B, 2002, vol. 65, pp. 035406.10.1103/PhysRevB.65.035406 ↗
25. K. Johnston, M. R. Castell, A. T. Paxton and M. W. Finnis: Phys. Rev. B, 2004, vol. 70, pp. 085415.10.1103/PhysRevB.70.085415 ↗
26. NIST Standard Reference Database (National Institute of Standards and Technology, Gaithersburg, MD), 2003, http://webbook.nist.gov/chemistry. Accessed 21 June 2017.
27. Springer Materials (Springer, Berlin, 2001), https://materials.springer.com. Accessed 8 Dec 2017.
28. X.-Q. Chen, V. T. Witusiewicz, R. Podloucky, P. Rogl and F. Sommer: Acta Mater., 2003, vol. 51, pp. 1239-47.10.1016/S1359-6454(02)00497-4 ↗
29. X. Yan, X.-Q. Chen, H. Michor, W. Wolf, V. T. Witusiewicz, E. Bauer, R. Podloucky and P. Rogl: Phys. Rev. B, 2018, vol. 97, pp. 125110.10.1103/PhysRevB.97.125110 ↗
30. I. H. Jung: Solid State Ionics, 2006, vol. 177, pp. 765-77.10.1016/j.ssi.2006.01.012 ↗
31. L. Kjellqvist and M. Selleby: Journal of Alloys and Compounds, 2010, vol. 507, pp. 84-92.10.1016/j.jallcom.2010.04.252 ↗
32. G. Kresse and J. Furthmuller: Phys. Rev. B, 1996, vol. 54, pp. 11169-86.10.1103/PhysRevB.54.11169 ↗
33. P. E. Blochl: Phys. Rev. B, 1994, vol. 50, pp. 17953-79.10.1103/PhysRevB.50.17953 ↗
34. J. P. Perdew, K. Burke and M. Ernzerhof: Phys. Rev. Lett., 1996, vol. 77, pp. 3865-68.10.1103/PhysRevLett.77.3865 ↗
35. V. I. Anisimov, F. Aryasetiawan and A. I. Lichtenstein (1997) J. Phys, 9, 767-808.
36. L. Wang, T. Maxisch and G. Ceder: Phys. Rev. B, 2006, vol. 73, pp. 195107.10.1103/PhysRevB.73.195107 ↗
37. Y. Wang, H. Z. Fang, C. L. Zacherl, Z. G. Mei, S. L. Shang, L. Q. Chen, P. D. Jablonski and Z. K. Liu: Surf. Sci., 2012, vol. 606, pp. 1422-25.10.1016/j.susc.2012.05.006 ↗
38. H. J. Monkhorst and J. D. Pack: Phys. Rev. B, 1976, vol. 13, pp. 5188-92.10.1103/PhysRevB.13.5188 ↗
39. F. D. Murnaghan: Proc. Natl. Acad. Sci. U. S. A., 1944, vol. 30, pp. 244-47.10.1073/pnas.30.9.244 ↗
40. J. A. Pople, M. Headgordon, D. J. Fox, K. Raghavachari and L. A. Curtiss: J. Chem. Phys., 1989, vol. 90, pp. 5622-29.10.1063/1.456415 ↗
41. S. Vratislav, J. Zajíček, Z. Jirák and A. F. Andresen: J. Magn. Magn. Mater., 1977, vol. 5, pp. 41-50.10.1016/0304-8853(77)90195-0 ↗
42. F. F. Fava, I. Baraille, A. Lichanot, C. Larrieu and R. Dovesi (1997) J. Phys., 9, 10715-24.
43. L. W. Finger and R. M. Hazen: J. Appl. Phys., 1980, vol. 51, pp. 5362-67.10.1063/1.327451 ↗
44. M. Kuriyama and S. Hosoya: J. Phys. Soc. Jpn., 1962, vol. 17, pp. 1022-29.10.1143/JPSJ.17.1022 ↗
45. B. Boucher, R. Buhl and M. Perrin: J. Phys. Chem. Solids, 1971, vol. 32, pp. 2429-37.10.1016/S0022-3697(71)80239-1 ↗
46. M. Regulski, R. Przenioslo, I. Sosnowska, D. Hohlwein and R. Schneider: J. Alloy. Compd., 2004, vol. 362, pp. 236-40.10.1016/S0925-8388(03)00591-7 ↗
47. E. Cockayne, I. Levin, H. Wu and A. Llobet: Phys. Rev. B, 2013, vol. 87, pp. 184413.10.1103/PhysRevB.87.184413 ↗
48. X. F. Wang, G. H. Li, Q. X. Chu, X. Y. Liu and S. H. Feng: Chem. J. Chin. Univ.-Chin., 2007, vol. 28, pp. 821-23.
49. E. P. Jeffrey and J. H. Peter: American Mineralogist, 2004, vol. 89, pp. 969-75.10.2138/am-2004-0706 ↗
50. A. A. Bolzan, C. Fong, B. J. Kennedy and C. J. Howard: Aust. J. Chem., 1993, vol. 46, pp. 939-44.10.1071/CH9930939 ↗
51. J. Kubler: J. Magn. Magn. Mater., 1980, vol. 20, pp. 277-84.10.1016/0304-8853(80)90446-1 ↗
52. J. Hafner and D. Hobbs: Phys. Rev. B, 2003, vol. 68, pp. 014408.10.1103/PhysRevB.68.014408 ↗
53. D. Hobbs, J. Hafner and D. Spisak: Phys. Rev. B, 2003, vol. 68, pp. 014407.10.1103/PhysRevB.68.014407 ↗
54. V. L. Chevrier, S. P. Ong, R. Armiento, M. K. Y. Chan and G. Ceder: Phys. Rev. B, 2010, vol. 82, pp. 075122.10.1103/PhysRevB.82.075122 ↗
55. F. T. Parker, H. Oesterreicher and E. Fullerton: J. Appl. Phys., 1989, vol. 66, pp. 5988-6000.10.1063/1.343627 ↗
56. J. Haglund, A. F. Guillermet, G. Grimvall and M. Korling: Phys. Rev. B, 1993, vol. 48, pp. 11685-91.10.1103/PhysRevB.48.11685 ↗
57. D. Das and S. Ghosh: J. Phys. D-Appl. Phys., 2015, vol. 48, pp. 425001.10.1088/0022-3727/48/42/425001 ↗
58. S. Q. Shi, A. L. Wysocki and K. D. Belashchenko: Phys. Rev. B, 2009, vol. 79, pp. 104404.10.1103/PhysRevB.79.104404 ↗
59. C. Franchini, R. Podloucky, J. Paier, M. Marsman and G. Kresse: Phys. Rev. B, 2007, vol. 75, pp. 195128.10.1103/PhysRevB.75.195128 ↗
60. J. S. Lim, D. Saldana-Greco and A. M. Rappe: Phys. Rev. B, 2016, vol. 94, pp. 165151.10.1103/PhysRevB.94.165151 ↗
61. W. L. Roth: Phys. Rev., 1958, vol. 110, pp. 1333-41.10.1103/PhysRev.110.1333 ↗
62. J. E. Pask, D. J. Singh, I. I. Mazin, C. S. Hellberg and J. Kortus: J. Alloy. Compd., 2012, vol. 612, pp. 465-70.
63. Y. Chabre and J. Pannetier: Prog. Solid State Chem., 1995, vol. 23, pp. 1-130.10.1016/0079-6786(94)00005-2 ↗
64. C. Fong, B. J. Kennedy and M. M. Elcombe: Z. Kristall., 1994, vol. 209, pp. 941-45.10.1524/zkri.1994.209.12.941 ↗
65. F. Jiao and P. G. Bruce: Adv. Mater., 2007, vol. 19, pp. 657-60.10.1002/adma.200602499 ↗
66. F. H. B. Lima, M. L. Calegaro and E. A. Ticianelli: Electrochim. Acta, 2007, vol. 52, pp. 3732-38.10.1016/j.electacta.2006.10.047 ↗
67. H. Zhang, G. P. Cao, Z. Y. Wang, Y. S. Yang, Z. J. Shi and Z. N. Gu: Nano Lett., 2008, vol. 8, pp. 2664-68.10.1021/nl800925j ↗
68. H. Sato, T. Enoki, M. Isobe and Y. Ueda: Phys. Rev. B, 2000, vol. 61, pp. 3563-69.10.1103/PhysRevB.61.3563 ↗
69. D. Balachandran, D. Morgan, G. Ceder and A. van de Walle: J. Solid State Chem., 2003, vol. 173, pp. 462-75.10.1016/S0022-4596(03)00023-9 ↗
70. S. Geller: Acta Crystallogr. B 1971, vol. 27, pp. 821-28.10.1107/S0567740871002966 ↗
71. R. R. Chevalier, G. Roult and E. F. Bertaut: Solid State Commun., 1967, vol. 5, pp. 7-11.10.1016/0038-1098(67)90036-1 ↗
72. R. W. Grant, S. Geller, J. A. Cape and G. P. Espinosa: Phys. Rev., 1968, vol. 175, pp. 686-95.10.1103/PhysRev.175.686 ↗
73. J. B. Goodenough and A. L. Loeb: Phys. Rev., 1955, vol. 98, pp. 391-408.10.1103/PhysRev.98.391 ↗
74. K. Dwight and N. Menyuk: Phys. Rev., 1960, vol. 119, pp. 1470-79.10.1103/PhysRev.119.1470 ↗
75. I. S. Jacobs: J. Phys. Chem. Solids, 1959, vol. 11, pp. 1-11.10.1016/0022-3697(59)90033-2 ↗
76. Y. Yafet and C. Kittel: Phys. Rev., 1952, vol. 87, pp. 290-94.10.1103/PhysRev.87.290 ↗
77. A. Chartier, P. D’Arco, R. Dovesi and V. R. Saunders: Phys. Rev. B, 1999, vol. 60, pp. 14042-48.10.1103/PhysRevB.60.14042 ↗
78. B. Chardon and F. Vigneron: J. Magn. Magn. Mater., 1986, vol. 58, pp. 128-34.10.1016/0304-8853(86)90132-0 ↗
79. N. Koc and M. Timucin: J. Am. Ceram. Soc., 2005, vol. 88, pp. 2578-85.10.1111/j.1551-2916.2005.00489.x ↗
80. Springer Materials (Springer, Berlin), 2001, https://materials.springer.com. Accessed 8 Dec 2017.
81. A. Jain, S. P. Ong, G. Hautier, W. Chen, W. D. Richards, S. Dacek, S. Cholia, D. Gunter, D. Skinner, G. Ceder and K. A. Persson: APL Mater., 2013, vol. 1, pp. 011002.10.1063/1.4812323 ↗
82. H. W. Peng, A. Zakutayev, S. Lany, T. R. Paudel, M. d’Avezac, P. F. Ndione, J. D. Perkins, D. S. Ginley, A. R. Nagaraja, N. H. Perry, T. O. Mason and A. Zunger: Adv. Funct. Mater., 2013, vol. 23, pp. 5267-76.10.1002/adfm.201300807 ↗
83. M. Aykol and C. Wolverton: Phys. Rev. B, 2014, vol. 90, pp. 115105.10.1103/PhysRevB.90.115105 ↗
84. C. Barouh, T. Schuler, C. C. Fu and T. Jourdan: Phys. Rev. B, 2015, vol. 92, pp. 104102.10.1103/PhysRevB.92.104102 ↗
85. J. H. Swisher and Turkdoga ET (1967) Trans. Met. Soc. AIME, 239, 426-31.
86. D. Z. Li, X.-Q. Chen, P. X. Fu, X. P. Ma, H. W. Liu, Y. Chen, Y. F. Cao, Y. K. Luan and Y. Y. Li: Nat. Commun., 2014, vol. 5, pp. 5572.10.1038/ncomms6572 ↗
87. C. S. Liu, S. F. Yang, J. S. Li, H. W. Ni and X. L. Zhang: Metall. Mater. Trans. B, 2017, vol. 48, pp. 1348-57.10.1007/s11663-016-0882-8 ↗