Effect of Warm to Hot Rolling on Microstructure, Texture and Mechanical Properties of an Advanced Medium-Mn Steel
Source abstract
Abstract
The deformation microstructures and mechanical properties were studied in a medium-Mn austenitic steel subjected to warm-to-hot rolling. During warm rolling at temperatures of T < 1073 K the structural changes were controlled by dynamic and static recovery leading to a pancaked work-hardened microstructure, during hot rolling at T ≥ 1073 K—by discontinuous dynamic and post-dynamic recrystallization resulting in equiaxed grains. The grain size decreased while the dislocation density increased with a decrease in rolling temperature. A decrease in rolling temperature enhanced the texture development, which consisted of relatively strong Brass, S and P components. The Brass component exhibited the strongest temperature dependence. A decrease in rolling temperature resulted in significant strengthening of the steel. The yield strength increased from 340 to 950 MPa as rolling temperature decreased from 1373 K to 773 K. Both the grain refinement and the work-hardening contributed to the strengthening.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. O. Grässel, L. Krüger, G. Frommeyer and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–409.10.1016/S0749-6419(00)00015-2 ↗
2. P.S. Kusakin and R.O. Kaibyshev: Rev. Adv. Mater. Sci., 2016, vol. 44, pp. 326–60.
3. B.C. De Cooman, Y. Estrin and S.K. Kim: Acta Mater., 2018, vol. 142, pp. 283–362.10.1016/j.actamat.2017.06.046 ↗
4. A. Saeed-Akbari, L. Mosecker, A. Schwedt and W. Bleck: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1688–704.10.1007/s11661-011-0993-4 ↗
5. J.-K. Kim and B.C. De Cooman: Mater. Sci. Eng. A, 2016, vol. A676, pp. 216–31.10.1016/j.msea.2016.08.106 ↗
6. Y. Kim, N. Kang, Y. Park, I. Choi, G. Kim, S. Kim and K. Cho: J. Korean Inst. Met. Mater., 2008, vol. 46, pp. 780-7.
7. I. Nikulin, T. Sawaguchi and K. Tsuzaki: Mater. Sci. Eng. A, 2013, vol. A587, pp. 192-200.10.1016/j.msea.2013.08.061 ↗
8. M. Koyama, Y. Yamamura, R. Che, T. Sawaguchi, K. Tsuzaki and H. Noguchi: Int. J. Fatigue, 2017, vol. 94, pp. 1-5.10.1016/j.ijfatigue.2016.09.003 ↗
9. Y.-K. Lee and J. Han: Mater. Sci. Technol., 2015, vol. 31, pp. 843-56.10.1179/1743284714Y.0000000722 ↗
10. J. Han, A. Kwiatkowski da Silva, D. Ponge, D. Raabe, S.-M. Lee, Y.-K. Lee, S.-I. Lee and B. Hwang: Acta Mater., 2017, vol. 122, pp. 199-206.10.1016/j.actamat.2016.09.048 ↗
11. Y. Li, W. Li, N. Min, W. Liu and X. Jin: Acta Mater., 2017, vol. 139, pp. 96-108.10.1016/j.actamat.2017.08.003 ↗
12. K. Li, V.S.Y. Injeti, R.D.K. Misra, Z.H. Cai and H. Ding: Mater. Sci. Eng. A, 2018, vol. A711, pp. 515–23.10.1016/j.msea.2017.11.055 ↗
13. X.Y. Qi, L.X. Du, J. Hu and R.D.K. Misra: Mater. Sci. Eng. A, 2018, vol. A718, pp. 477-82.10.1016/j.msea.2018.01.110 ↗
14. E.J. Seo, J.K. Kim, L. Cho, J. Mola, C.Y. Oh and B.C. De Cooman: Acta Mater., 2017, vol. 135, pp. 112-23.10.1016/j.actamat.2017.06.014 ↗
15. K. Steineder, D. Krizan, R. Schneider, C. Beal and C. Sommitsch: Acta Mater., 2017, vol. 139, pp. 39-50.10.1016/j.actamat.2017.07.056 ↗
16. T. Furukawa, H. Huang and O. Matsumura: Mater. Sci. Technol., 1994, vol. 10, pp. 964-70.10.1179/mst.1994.10.11.964 ↗
17. P.J. Gibbs, E. De Moor, M.J. Merwin, B. Clausen, J. G. Speer and D.K. Matlock: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3691-3702.10.1007/s11661-011-0687-y ↗
18. S. Lee and B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5018-24.10.1007/s11661-013-1860-2 ↗
19. V. Torganchuk, D.A. Molodov, A. Belyakov and R. Kaibyshev: Defect Diffus. Forum, 2018, vol. 385, pp.308-13.10.4028/www.scientific.net/DDF.385.308 ↗
20. M. Calcagnotto, D. Ponge, E. Demir and D. Raabe: Mater. Sci. Eng. A, 2010, vol. A527, pp. 2738-46.10.1016/j.msea.2010.01.004 ↗
21. F. Bachmann, R. Hielscher and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63-8.10.4028/www.scientific.net/SSP.160.63 ↗
22. H.J. McQueen and J.J. Jonas: in: R.J. Arsenault (Ed.), Treatise on Materials Science and Technology, Volume 6, Academic Press, New York, NY, 1975, pp. 394-493.
23. T. Sakai and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 189-209.10.1016/0001-6160(84)90049-X ↗
24. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura and J.J. Jonas: Prog. Mater. Sci., 2014, vol. 60, pp. 130-207.10.1016/j.pmatsci.2013.09.002 ↗
25. M. Tikhonova, R. Kaibyshev and A. Belyakov: Adv. Eng. Mater., 2018, vol. 20, 1700960.10.1002/adem.201700960 ↗
26. L. Rémy: Metall. Trans. A, 1981, vol. 12A, pp. 387-408.10.1007/BF02648536 ↗
27. E.I. Galindo-Nava and P.E.J. Rivera-Díaz-del-Castillo: Acta Mater., 2017, vol. 128, pp. 120-34.10.1016/j.actamat.2017.02.004 ↗
28. P.C.J. Gallagher: Metall. Trans., 1970, vol. 1, pp. 2429-61.10.1007/BF03038370 ↗
29. R.M. Latanision and A.W. Ruff: Metall. Trans., 1971, vol. 2, pp. 505-9.10.1007/BF02663341 ↗
30. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Science, New York, NY, 2004.
31. J.K. Mackenzie: Biometrika, 1958, vol. 45, pp. 229-40.10.1093/biomet/45.1-2.229 ↗
32. Y. Lü, D.A. Molodov and G. Gottstein: ISIJ Int., 2011, vol. 51, pp. 812-17.10.2355/isijinternational.51.812 ↗
33. C. Haase, S.G. Chowdhury, L.A. Barrales-Mora, D.A. Molodov and G. Gottstein: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 911-22.10.1007/s11661-012-1543-4 ↗
34. C. Haase, T. Ingendahl, O. Güvenç, M. Bambach, W. Bleck, D.A. Molodov and L.A. Barrales-Mora: Mater. Sci. Eng. A, 2016, vol. A649, pp. 74-84.10.1016/j.msea.2015.09.096 ↗
35. Z. Yanushkevich, A. Belyakov, C. Haase, D.A. Molodov and R. Kaibyshev: Mater. Sci. Eng. A, 2016, vol. A651, pp. 763-73.10.1016/j.msea.2015.11.027 ↗
36. M. Klimova, G. Dyakonov, S. Zherebtsov, G. Salishchev, and D. Molodov: IOP Conf. Series: Mater. Sci. Eng., 2014, vol. 63, art. No. 012157.10.1088/1757-899X/63/1/012157 ↗
37. P. Kusakin, K. Tsuzaki, D.A. Molodov, R. Kaibyshev and A. Belyakov: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 5704-8.10.1007/s11661-016-3794-y ↗
38. C. Haase, C. Zehnder, T. Ingendahl, A. Bikar, F. Tang, B. Hallstedt, W. Hu, W. Bleck and D.A. Molodov: Acta Mater., 2017, vol. 122, pp. 332-43.10.1016/j.actamat.2016.10.006 ↗
39. V. Torganchuk, A. Belyakov and R. Kaibyshev: Mater. Sci. Eng. A, 2017, vol. A708, pp. 110-17.10.1016/j.msea.2017.09.122 ↗
40. Z. Yanushkevich, S.V. Dobatkin, A. Belyakov and R. Kaibyshev: Acta Mater., 2017, vol. 136, pp. 39-48.10.1016/j.actamat.2017.06.060 ↗
41. Y.-X. Liu, Y.C. Lin and Y. Zhou: Mater. Sci. Eng. A, 2017, vol. A691, pp. 88-99.10.1016/j.msea.2017.03.039 ↗
42. D.-G. He, Y.C. Lin, J. Huang and Y. Tang: Adv. Eng. Mater., 2018, vol. 20, 1800129.10.1002/adem.201800129 ↗
43. P. Kusakin, A. Kalinenko, K. Tsuzaki, A. Belyakov and R. Kaibyshev: Kovove Materialy, 2017, vol. 55, pp. 161-7.10.4149/km_2017_3_161 ↗
44. T. Maki, K. Akasaka, K. Okuno and I. Tamura: Trans. Iron Steel Inst. Jpn., 1982, vol. 22, pp. 253-61.10.2355/isijinternational1966.22.253 ↗
45. M. Tikhonova, A. Belyakov and R. Kaibyshev: Mater. Sci. Eng. A, 2013, vol. A564, pp. 413-22.10.1016/j.msea.2012.11.088 ↗
46. Z. Yanushkevich, A. Lugovskaya, A. Belyakov and R. Kaibyshev: Mater. Sci. Eng. A, 2016, A667, pp. 279-85.10.1016/j.msea.2016.05.008 ↗
47. M. Tikhonova, P. Dolzhenko, R. Kaibyshev and A. Belyakov: Metals, 2016, vol. 6, 268.10.3390/met6110268 ↗
48. S. Gourdet and F. Montheillet: Acta Mater., 2003, vol. 51, pp. 2685-99.10.1016/S1359-6454(03)00078-8 ↗
49. N. Dudova, A. Belyakov, T. Sakai and R. Kaibyshev: Acta Mater., 2010, vol. 58, pp. 3624-32.10.1016/j.actamat.2010.02.032 ↗
50. L.S. Toth, Y. Estrin, R. Lapovok and C. Gu: Acta Mater., 2010, vol. 58, pp. 1782-94.10.1016/j.actamat.2009.11.020 ↗
51. Z. Yanushkevich, A. Belyakov and R. Kaibyshev: Acta Mater., 2015, vol. 82, pp. 244-54.10.1016/j.actamat.2014.09.023 ↗
52. J. Hirsch and K. Lucke: Acta Met. Mater., 1988, vol. 36, pp. 2863-82.10.1016/0001-6160(88)90172-1 ↗
53. E.O. Hall: Proc. Phys. Soc., 1951, vol. B64, pp. 742-7.10.1088/0370-1301/64/9/302 ↗
54. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-8.
55. C.M. Young and O.D. Sherby: J. Iron Steel Inst., 1973, vol. 211, pp. 640-7.
56. P. Kusakin, A. Belyakov, R. Kaibyshev and D. Molodov: Mater. Sci. Forum, 2016, vol. 838-839, pp. 392-7.10.4028/www.scientific.net/MSF.838-839.392 ↗
57. Z. Yanushkevich, A. Belyakov, R. Kaibyshev, C. Haase and D.A. Molodov: Mater. Charact., 2016, vol. 112, pp. 180-7.10.1016/j.matchar.2015.12.021 ↗
58. M. Odnobokova, A. Belyakov, N. Enikeev, D.A. Molodov and R. Kaibyshev: Mater. Sci. Eng. A, 2017, vol. A689, pp. 370-83.10.1016/j.msea.2017.02.073 ↗
59. A. Kalinenko, P. Kusakin, A. Belyakov, R. Kaibyshev and D.A. Molodov: Metals, 2017, vol. 7, 571.10.3390/met7120571 ↗
60. J. Gil Sevillano, P. van Houtte and E. Aernoudt: Prog. Mater. Sci., 1981, vol. 25, pp. 69-412.10.1016/0079-6425(80)90001-8 ↗
61. T. Sakai: J. Mater. Process. Technol., 1995, vol. 53, pp. 349-61.10.1016/0924-0136(95)01992-N ↗
62. T. Sakai and M. Ohashi: Mater. Sci. Technol., 1990, vol. 6, pp. 1251-7.10.1179/mst.1990.6.12.1251 ↗
63. Y. Estrin, L.S. Toth, A. Molinari and Y. Brechet: Acta Mater., 1998, vol. 46, pp. 5509-22.10.1016/S1359-6454(98)00196-7 ↗
64. N. Hansen: Scr. Mater., 2004, vol. 51, pp. 801-6.10.1016/j.scriptamat.2004.06.002 ↗
65. I. Shakhova, A. Belyakov, Z. Yanushkevich, K. Tsuzaki and R. Kaibyshev: ISIJ Int., 2016, vol. 56, pp. 1289-96.10.2355/isijinternational.ISIJINT-2016-095 ↗
66. M.J. Starink: Mater. Sci. Eng. A, 2017, vol. A705, pp. 42-5.10.1016/j.msea.2017.08.069 ↗