journal article·2019-02-15Open access

Nano-mechanical Behavior of H13 Tool Steel Fabricated by a Selective Laser Melting Method

Van Luong Nguyen, Eun-ah Kim, Jaecheol Yun, Jungho Choe, Dong-yeol Yang, Hak-sung Lee, Chang-woo Lee, Ji-Hun Yu

Abstract

Abstract Nano-mechanical properties of selective laser melted H13 steel at a scan laser speed of 100 mm/s were investigated using nanoindentation tests. The findings shed light on the interrelationship between the nanoindentation strain rate and hardness. It was found that the strain-rate sensitivity exponent (m = 0.022) of this material indicated that the nanoindentation hardness increased in a range of (8.41 to 9.18) GPa with an increase in the strain rate ranging from 0.002 to 0.1 s−1.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Additive Manufacturing Materials and Processes · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. J. Pinkerton, L. Li, Int. J. Adv. Manuf. Technol., 2005, vol. 25, pp. 471–479.10.1007/s00170-003-1844-2 ↗
2. J. Marashi, E. Yakushina, P. Xirouchakis, R. Zante, J. Foster, J. Mater. Process. Technol., 2017, vol. 246, pp. 276–184.10.1016/j.jmatprotec.2017.03.026 ↗
3. Z. Duan, W. Pei, X. Gong, H. Chen, Materials, 2017, vol. 10, pp. 870–878.10.3390/ma10080870 ↗
4. M. Kang, G. Park, J.G. Jung, B.H. Kim, Y.K. Lee, J. Alloy. Compd., 2015, vol. 627, pp. 359–366.10.1016/j.jallcom.2014.11.189 ↗
5. J.J. Yan, D.L. Zheng, H.X. Li, X. Jia, J.F. Sun, Y.L. Li, Metals, 2017, vol. 52, pp. 12476–12485.
6. P. Mencin, C.J.V. Van Tyne, B.S. Levy, J. Mater. Eng. Perform., 2009, vol. 18, pp. 1067–1072.10.1007/s11665-008-9345-y ↗
7. J. Safka, M. Ackermann, L. Volesky, J. Phys. Conf. Ser., 2016, vol. 709 (012004),, pp. 1–7.
8. J.C. Yun, J.H. Choe, H.N. Lee, K.B. Kim, S.S. Yang, D.Y. Yang, Y.J. Kim, C.W. Lee, J.H. Yu, J. Korean. Powder. Metall. Inst., 2017, vol. 24 (3), pp. 195–201.10.4150/KPMI.2017.24.3.195 ↗
9. N.T. Aboulkhair, C. Tuck, I. Ashcroft, I. Maskery, N.M. Everitt, Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3337–3341.10.1007/s11661-015-2980-7 ↗
10. V.S. Sufiiarov, A.A. Popovich, E.V. Borisov, I.A. Polozov, D.V. Masaylo, A.V. Orlov, Procedia Eng., 2017, vol. 174, pp. 126–134.10.1016/j.proeng.2017.01.179 ↗
11. J.P. Choi, G.H. Shin, M. Brochu, Y.J. Kim, S.S. Yang, K.T. Kim, D.Y. Yang, C.W. Lee, J.H. Yu, Mater. Trans., 2016, vol. 57, pp. 1952–1959.10.2320/matertrans.M2016284 ↗
12. J.P. Choi, G.H. Shin, S.S. Yang, D.Y. Yang, J.S. Lee, M. Brochu, J.H. Yu, Powder. Technol., 2017, vol. 310, pp. 60–66.10.1016/j.powtec.2017.01.030 ↗
13. B. AlMangour, D. Grzesiak, J.M. Yang, J. Mater. Process. Technol., 2017, vol. 244, pp. 344–353.10.1016/j.jmatprotec.2017.01.019 ↗
14. J.P. Choi, G.H. Shin, H.S. Lee, D.Y. Yang, S.S Yang, C.W. Lee, M. Brochu, J.H. Yu, Mater. Trans., 2017, vol. 58, pp. 294–297.10.2320/matertrans.M2016364 ↗
15. J. Sander, J. Hufenbach, L. Giebeler, H. Wendrock, U. Kuhn, J. Eckert, Mater. Des., 2016, vol. 89, pp. 335–341.10.1016/j.matdes.2015.09.148 ↗
16. R. Mertens, B. Vrancken, N. Holmstock, Y. Kinds, J.P. Kruth, J.V. Humbeeck, Phys. Procedia., 2016, vol. 83, pp. 882–890.10.1016/j.phpro.2016.08.092 ↗
17. M.J. Holzweissig, A. Taube, F. Brenne, M. Schaper, T. Niendorf, Metall. Mater. Trans. B, 2015, vol. 46B, pp. 545–549.10.1007/s11663-014-0267-9 ↗
18. J.J. Hu, Y.S. Zhang, W.M. Sun, T.H. Zhang, Crystals, 2018, vol. 8, 9.10.3390/cryst8010009 ↗
19. S. Xu, A.H. Habib, A.D. Pickel, M.E. McHenry, Prog. Mater. Sci., 2015, vol. 67, pp. 95–160.10.1016/j.pmatsci.2014.08.001 ↗
20. V.L. Nguyen, C.S. Chung, H.K. Kim, Mater. Lett., 2016, vol. 162, pp. 185–190.10.1016/j.matlet.2015.10.019 ↗
21. C.Z. Liu, J. Chen, Mater. Sci. Eng. A, 2007, vol. 448, pp. 340–344.10.1016/j.msea.2006.10.056 ↗
22. C.L. Wang, Y.H. Lai, J.C. Huang, T.G Nieh, Scripta Materialia, 2010, vol. 62, pp. 175–178.10.1016/j.scriptamat.2009.10.021 ↗
23. R. Goodall, T.W. Clyne, Acta. Mater., 2006, vol. 54, pp. 5489–5499.10.1016/j.actamat.2006.07.020 ↗
24. L. Shen, W.C.D. Cheong, Y.L. Foo, Z. Chen, Mater. Sci. Eng. A, 2012, vol. 532, pp. 505–510.10.1016/j.msea.2011.11.016 ↗
25. V.M. Kiener, K. Durst, JOM, 2017, vol. 69, pp. 2246–2254.10.1007/s11837-017-2536-y ↗
26. P.S. Phani, W.C. Oliver, G.M. Pharr, JOM, 2004, vol. 69, pp. 2229–2236.10.1007/s11837-017-2535-z ↗
27. W.C. Oliver, G.M. Pharr, J. Mater. Res., 2004, vol. 19, pp. 3–20.10.1557/jmr.2004.19.1.3 ↗
28. M.J. Mayo, W.D. Nix, Acta. Metall., vol. 36 (1988) 2183–2192.10.1016/0001-6160(88)90319-7 ↗
29. Y.L. Li, D.D. Gu, Mater. Des., 2014, vol. 63, pp. 856–86710.1016/j.matdes.2014.07.006 ↗
30. V.L. Nguyen, E.A. Kim, J.C. Yun, J.H. Choe, D.Y. Yang, H.S. Lee, C.W. Lee, J.H. Yu, (unpublished work).