Time-Dependent Evolution of Ti-Bearing Oxide Inclusions During Isothermal Holding at 1573 K (1300 °C)
Source abstract
Abstract
Ti-bearing oxide inclusions are utilized to enhance the properties of steel used in shipbuilding, multi-purpose gas carriers, and pipelines in accordance with the principles of oxide metallurgy. Conventionally, Ti-bearing oxide inclusions have been assumed to be stable during isothermal holding. The authors propose the possibility of modifying Ti-bearing oxide inclusions by appropriate heat treatment. To provide fundamental information on the evolution of Ti-bearing inclusions in solid steel during isothermal holding, the effect of the isothermal holding time on their evolution at 1573 K (1300 °C) was studied systematically. For heterogeneous phase Al+Ti oxide in the as-cast alloys, the composition and size distribution were maintained during isothermal holding. In contrast, homogeneous phase Al-Ti oxide in the as-cast alloys changed to a heterogeneous oxide consisting of an Al-rich part and a Ti-rich part and its shape changed from spherical to irregular. The composition of the Al-Ti oxide changed upon isothermal holding for 0.5 hour, and it occurred earlier in the Al-Ti oxide with a higher Al content. The evolution mechanism is considered to involve the precipitation of Al2O3 from the Al-Ti oxide owing to crystallization of glassy oxide during isothermal holding. The results challenge the long-held opinion that Ti-bearing oxide inclusions are maintained in solid steel during isothermal holding, which is the first step toward modifying oxide inclusions by heat treatment as a new concept in oxide metallurgy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. D. Zhang, H. Terasaki, and Y. Komizo: Acta Materialia, 2010, 58, 1369-1378.10.1016/j.actamat.2009.10.043 ↗
2. Y. Hou, W. Zheng, Z. Wu, G. Li, N. Moelans, M. Guo, and B. S. Khan: Acta Materialia, 2016, 118, 8-16.10.1016/j.actamat.2016.07.027 ↗
3. J. Shim, Y. Suh, Y. Cho, J. Shim, J. Byun, and D. Lee: Acta Materialia, 2001, 49, 2115-2122.10.1016/S1359-6454(01)00134-3 ↗
4. J. M. Gregg, and H. K. D. Bhadeshia: Acta Materialia, 1997, 45, 739-748.10.1016/S1359-6454(96)00187-5 ↗
5. J. Byun, J. Shim, Y. Cho, and D. Lee: Acta Materialia, 2003, 51, 1593-1606.10.1016/S1359-6454(02)00560-8 ↗
6. J. Shim, Y. Cho, S. Chung, J. Shim, and D. Lee: Acta Materialia, 1999, 47, 2751-2760.10.1016/S1359-6454(99)00114-7 ↗
7. H. Mabuchi, R. Uemori, and M. Fujioka: ISIJ Int., 1996, 36, 1406-1412.10.2355/isijinternational.36.1406 ↗
8. J. L. Lee, and Y. T. Pan: ISIJ Int., 1995, 35, 1027-1033.10.2355/isijinternational.35.1027 ↗
9. Y. Kang, J. Jang, J. Park, and C. Lee: Met. Mater. Int., 2014, 1, 119-127.10.1007/s12540-014-1013-1 ↗
10. Y. Li, J. Liu, Y. Deng, X. Han, W. Hu, and C. Zhong: Journal of Alloys and Compounds, 2016, 673, 28-37.10.1016/j.jallcom.2016.02.224 ↗
11. Takahashi T, Sakae T, Yoshida T (1967) Tetsu-to-Hagané 53:342-49.10.2355/tetsutohagane1955.53.11_1242 ↗
12. K. Takano, R. Nakao, S. Fukuoto, T. Tsutiyama, and S. Takaki: Tetsu-to-Hagané, 2003, 89, 616-622.10.2355/tetsutohagane1955.89.5_616 ↗
13. H. Shibata, T. Tanaka, K. Kimura, and S. Kitamura: Ironmaking Steelmaking, 2010, 37, 522-528.10.1179/030192310X12700328925903 ↗
14. Y. Ren, L. Zhang, and P.C. Pistorius: Metall. Mater. Trans. B, 2017, 48, 2281-2292.10.1007/s11663-017-1007-8 ↗
15. H. Shibata, K. Kimura, T. Tanaka, and S. Kitamura: ISIJ Int., 2011, 51, 1944-1950.10.2355/isijinternational.51.1944 ↗
16. K. Kim, S.J. Kim, H. Shibata, and S. Kitamura: ISIJ Int., 2014, 54, 2144-2153.10.2355/isijinternational.54.2144 ↗
17. K. Kim, H. Shibata, and S. Kitamura: ISIJ Int., 2014, 54, 2678-2686.10.2355/isijinternational.54.2678 ↗
18. C. Liu, K. Kim, S. Kim, J. Li, S. Ueda, X. Gao, H. Shibata, and S. Kitamura: Metall. Mater. Trans. B, 2015, 46, 1875-1884.10.1007/s11663-015-0356-4 ↗
19. C. Liu, S. Yang, J. Li, H. Ni, and X. Zhang: Metall. Mater. Trans. B, 2017, 48, 1348-1357.10.1007/s11663-016-0882-8 ↗
20. F. Ruby-Meyer, J. Lehmann, and H. Gaye: Scand. J. Metall., 2000, 29, 206-212.10.1034/j.1600-0692.2000.d01-24.x ↗
21. I. Jung, S. A. Decterov, and A. D. Pelton: ISIJ Int., 2004, 44, 527-536.10.2355/isijinternational.44.527 ↗
22. I. Jung, G. Eriksson, P. Wu, and A. D. Pelton: ISIJ Int., 2009, 49, 1290-1297.10.2355/isijinternational.49.1290 ↗
23. Y. Kang, and J. Lee: ISIJ Int., 2017, 57, 1665-1667.10.2355/isijinternational.ISIJINT-2017-182 ↗
24. H. Matsuura, C. Wang, G. H. Wen, and S. Sridhar: ISIJ Int., 2007, 47, 1265-1274.10.2355/isijinternational.47.1265 ↗
25. C. Wang, N. T. Nufher, and S. Sridhar: Metall. Mater. Trans. B, 2009, 40, 1005-1021.10.1007/s11663-009-9267-6 ↗
26. C. Wang, N. T. Nufher, and S. Sridhar: Metall. Mater. Trans. B, 2009, 40, 1022-1034.10.1007/s11663-009-9290-7 ↗
27. C. Wang, N. T. Nufher, and S. Sridhar: Metall. Mater. Trans. B, 2010, 41, 1084-1094.10.1007/s11663-010-9397-x ↗
28. C. Wang, N. Verma, Y. Kwon, W. Tiekink, N. Kikuchi, and S. Sridhar: ISIJ Int., 2011, 51, 375-381.10.2355/isijinternational.51.375 ↗
29. M. Li, H. Matsuura, and F. Tsukihashi: Metall. Mater. Trans. B, 2017, 48, 1915-1923.10.1007/s11663-017-0968-y ↗
30. M. Nagano, S. Nagashima, H. Maeda, and A. Kato: Ceramics Int., 1999, 25, 681-687.10.1016/S0272-8842(98)00083-2 ↗
31. C. Xuan, A. V. Karasev, and P. G. Jönsson,: ISIJ Int., 2016, 56, 1204-1209.10.2355/isijinternational.ISIJINT-2016-030 ↗
32. C. Xuan, A. V. Karasev, P. G. Jönsson, and K. Nakajima: Steel Research Int., 2017, 88, 262-270.10.1002/srin.201600090 ↗
33. K. Nakajima: Tetsu-to-Hagané, 1994, 80, 383-388.10.2355/tetsutohagane1955.80.5_383 ↗
34. M. Humenik, and W. D. Kingery: J. Am. Ceram. Soc., 1954, 37, 18-23.10.1111/j.1151-2916.1954.tb13972.x ↗
35. H. Ito, M. Hino, and S. Ban-ya: Tetsu-to-Hagané, 1997, 83, 773-778.10.2355/tetsutohagane1955.83.12_773 ↗
36. W. Y. Cha, T. Miki, Y. Sasaki, and M. Hino: ISIJ Int., 2008, 48, 729-738.10.2355/isijinternational.48.729 ↗
37. K. Yamamoto, T. Hasegawa, and J. Takamura: Tetsu-to-Hagané, 1993, 79, 1169-1175.10.2355/tetsutohagane1955.79.10_1169 ↗
38. Y. Kang and H. Lee: ISIJ Int., 2010, 50, 501-508.10.2355/isijinternational.50.501 ↗
39. M. Jiang, X. H. Wang, Z. Y Hu, K. P. Wang, C. W. Yang, and S. R. Li: Materials Characterization, 2015, 108, 58-67.10.1016/j.matchar.2015.08.018 ↗
40. Q. Huang, X. Wang, M. Jiang, Z.Hu, and C. Yang: Steel Research Int., 2015, 87, 445-455.10.1002/srin.201500088 ↗
41. Z. Yang, F. Wang, S. Wang, and B. Song: Steel Research. Int., 2008, 79, 390-395.10.1002/srin.200806143 ↗