The Influence of Ultrasonic Cavitation on the Formation of Fe-Rich Intermetallics in A383 Alloy
Source abstract
Abstract
The effect of ultrasonic treatment (UST) on the formation of Fe-rich intermetallics (including sludge) in the A383 alloy is investigated for different processing temperatures in the present study. Differential scanning calorimetry is used to analyze the precipitation temperature of the sludge phase. The results revealed that the sludge will precipitate at a temperature above that of the Al matrix and the precipitation temperature decreases with an increasing cooling rate. UST cavitation applied at different temperatures (600 °C to 750 °C) during the solidification process breaks the sludge into small island-like pieces. However, the aggregation trend of the sludge is not changed. Sludge with small size and uniform distribution is obtained when UST is applied at 600 °C, which is lower than the precipitation temperature of the sludge. At the highest temperature (850 °C), the application of UST has no effect on the formation of either sludge or α-Fe intermetallics. At 750 °C, UST promotes the formation of the sludge when applied at 750 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. [1] H. Ye, Journal of Materials Engineering and Performance, 2003, vol. 12(3), pp. 288-297.10.1361/105994903770343132 ↗
2. [2] J.Z. Yi, Y.X. Gao, P.D. Lee, Materials Science and Engineering A, 2004, vol. 386(1), pp. 396-407.10.1016/S0921-5093(04)00964-5 ↗
3. G.B. Winkelman, Z.W. Chen, D.H. John, J. Mater. Sci., 2004, vol. 39(2), pp. 519-528.10.1023/B:JMSC.0000011507.38552.19 ↗
4. [4] L. Wang, M. Makhlouf, D. Apelian, International Materials Reviews, 2013, vol. 40(6), pp. 221-238.10.1179/imr.1995.40.6.221 ↗
5. [5] A. Flores-V, M. Sukiennik, A.H. Castillejos-E, F.A. Acosta-G, J.C. Escobedo-B, Intermetallics, 1998, vol. 6(3), pp. 217-227.10.1016/S0966-9795(97)00073-3 ↗
6. [6] X. Cao, J. Campbell. Metallurgical and Materials Transactions A, 2004, vol. 35(5), pp. 1425-1435.10.1007/s11661-004-0251-0 ↗
7. [7] A. Fabrizi, S. Ferraro, G. Timelli, in: M. Tiryakioglu, J. Campbell, G. Byczynski (Eds.), Shape Casting 5: International Symposium 2014, Hoboken, New Jersey, 2014, pp. 277-284.
8. [8] C. Puncreobutr, A.B. Phillion, J.L. Fife, P. Rockett, A.P. Horsfield, P.D. Lee, Acta Materialia, 2014, vol. 79, pp. 292-303.10.1016/j.actamat.2014.07.018 ↗
9. [9] A.M.A. Mohamed, A.M. Samuel, F.H. Samuel, H.W. Doty, Materials & Design, 2009, vol. 30(10), pp. 3943-3957.10.1016/j.matdes.2009.05.042 ↗
10. [10] L. Lu, A.K. Dahle. Metallurgical and Materials Transactions A, 2005, vol. 36A, pp.819–835.
11. [11] S.G. Shabestari, Materials Science and Engineering: A, 2004, vol. 383(2), pp. 289-298.10.1016/S0921-5093(04)00832-9 ↗
12. [12] X. Cao, N. Saunders, J. Campbell, Journal of Materials Science, 2004, vol. 39(7), pp. 2303-2314.10.1023/B:JMSC.0000019991.70334.5f ↗
13. [13] M.V. Kral, H.R. McIntyre, M.J. Smillie. Scripta Materialia, 2004, vol. 51(3), pp. 215–219.10.1016/j.scriptamat.2004.04.015 ↗
14. [14] C.B. Basak, N. Hari Babu. Materials & Design, 2016, vol. 108, pp. 277-288.10.1016/j.matdes.2016.06.096 ↗
15. [15] Gabrielle Gaustad, Elsa Olivetti, Randolph Kirchain, Resources, Conservation and Recycling, 2012, vol. 58, pp. 79-87.10.1016/j.resconrec.2011.10.010 ↗
16. X. Liu, Master Thesis, The University of Alabama; 2013.
17. [17] S.A. Jia, Y. Xuan, L. Nastac, P. G. Allison, T. W. Rushing, International Journal of Cast Metals Research, 2016, vol. 29(5), pp. 286-289.10.1080/13640461.2016.1181232 ↗
18. [18] Jiuchun Yan, Zhiwu Xu, Lei Shi, Xing Ma, Shiqin Yang, Materials and Design, 2011, vol. 32(1), pp. 343-347.10.1016/j.matdes.2010.06.036 ↗
19. [19] Jae-Gil Jung, Jung-Moo Lee, Young-Hee Cho, Journal of Alloys and Compounds, 2017, vol. 693, pp. 201-210.10.1016/j.jallcom.2016.09.006 ↗
20. [20] Meng Sha, Shusen Wu, Li Wan, Materials Science and Engineering A. 2012, vol. 554(30), pp. 142-148.10.1016/j.msea.2012.06.026 ↗
21. J. Youn, Y.J. Kim, Jpn. J. Appl. Phys., 2009, vol. 48(7), 74–79.10.1143/JJAP.48.07GM14 ↗
22. [22] Yubo Zhang, Jinchuan Jie, Yuan Gao, Yiping Lu, Tingju Li, Intermetallics, 2013, vol. 42, pp. 120-125.10.1016/j.intermet.2013.05.018 ↗
23. [23] H. Puga, S. Costa, J. Barbosa, S. Ribeiro, M. Prokic, Journal of Materials Processing Technology, 2011, vol. 211, pp. 1729-1735.10.1016/j.jmatprotec.2011.05.012 ↗
24. [24] J. Barbosa, H. Puga, J. Oliverira, S. Ribeiro, M. Prokic, Materials Chemistry and Physics, 2014, vol. 148, pp. 1163-1170.10.1016/j.matchemphys.2014.09.041 ↗
25. [25] W. Khalifa, Y. Tsunekaw, M. Okumiya, Journal of Materials Processing Technology, 2010, vol. 210, pp. 2178-2187.10.1016/j.jmatprotec.2010.08.008 ↗
26. [26] C. J. Todaro, M. A. Easton, D. Qiu, G. Wang, D. H. StJohn, M. Qian. Metallurgical and Materials Transactions A, 2017, vol. 48(11), pp. 5579-5590.10.1007/s11661-017-4325-1 ↗
27. [27] Stefano Ferraro, Anton Bjurenstedt, Salem Seifeddine, Metallurgical and Materials Transactions A, 2015, vol. 46(8), pp. 3713-3722.10.1007/s11661-015-2942-0 ↗
28. [28] Z. Ma, E. Samuel, A.M.A. Mohamed, A.M. Samuel, F.H. Samuel, H.W. Doty, Materials & Design. 2010, vol. 31(2), pp. 902-912.10.1016/j.matdes.2009.07.033 ↗
29. [29] S.G. Shabestari, J.E. Gruzleski, Cast Metals. 1994, vol. 6, pp. 217-224.10.1080/09534962.1994.11819153 ↗
30. [30] D.M. Herlach, K. Eckler, A. Karma, M. Schwarz, Materials Science and Engineering A, 2001, vol. 304-306, pp. 20-25.10.1016/S0921-5093(00)01553-7 ↗
31. [31] J.G. Jung, T.Y. Ahn, Y.H. Cho, S.H. Kim, J.M. Lee, Acta Materialia, 2018, vol. 144, pp. 31-40.10.1016/j.actamat.2017.10.039 ↗
32. F. Wang, D. Eskin, J. Mi, T. Connolley, J. Lindsay, M. Mounib, Acta Mater., 2016, vol. 116, pp. 354-363.10.1016/j.actamat.2016.06.056 ↗