journal article·2016-10

The Effects of Grain Size and Texture on Dynamic Abnormal Grain Growth in Mo

Philip J. Noell, Eric M. Taleff

Publisher page

Abstract

This is the first report of abnormal grain morphologies specific to a Mo sheet material produced from a commercial-purity arc-melted ingot. Abnormal grains initiated and grew during plastic deformation of this material at temperatures of 1793 K and 1813 K (1520 °C and 1540 °C). This abnormal grain growth during high-temperature plastic deformation is termed dynamic abnormal grain growth, DAGG. DAGG in this material readily consumes nearly all grains near the sheet center while leaving many grains near the sheet surface unconsumed. Crystallographic texture, grain size, and other microstructural features are characterized. After recrystallization, a significant through-thickness variation in crystallographic texture exists in this material but does not appear to directly influence DAGG propagation. Instead, dynamic normal grain growth, which may be influenced by texture, preferentially occurs near the sheet surface prior to DAGG. The large grains thus produced near the sheet surface inhibit the subsequent growth of the abnormal grains produced by DAGG, which preferentially consume the finer grains near the sheet center. This produces abnormal grains that span the sheet center but leave unconsumed polycrystalline microstructure near the sheet surface. Abnormal grains are preferentially oriented with the $$\left\langle 110\right\rangle $$ approximately along the tensile axis. These results provide additional new evidence that boundary curvature is the primary driving force for DAGG in Mo.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. F. Humphreys, M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd edn. (Elsevier, New York, 2004)
2. M. Hillert, Acta Metall. 13, 227–238 (1965)10.1016/0001-6160(65)90200-2 ↗
3. P. Rios, G. Gottstein, Acta Mater. 49, 2511–2518 (2001)10.1016/S1359-6454(01)00143-4 ↗
4. J.G. Byrne, Recovery, Recrystallization, and Grain Growth (The Macmillan, New York, 1965)
5. D. Dorner, S. Zaefferer, L. Lahn, D. Raabe, J. Magn. Magn. Mater. 304, 183–186 (2006)10.1016/j.jmmm.2006.02.116 ↗
6. C. Musiol, Met. Technol. (Lond.) 3, 173–182 (1976)10.1179/030716976803391692 ↗
7. J. Dennis, P.S. Bate, J.F. Humphreys, Mater. Sci. Forum 558–559, 717–722 (2007)10.4028/www.scientific.net/MSF.558-559.717 ↗
8. B. Flageolet, O. Yousfi, Y. Dahan, P. Villechaise, and J. Cormier: Superalloys 2012: The 12th International Symposium on Superalloys, 2012, pp. 594–60610.1002/9781118495223.ch46 ↗
9. D. Davidson, R. Tryon, M. Oja, R. Matthews, K.R. Chandran, Metall. Mater. Trans. A 38A, 2214–2225 (2007)10.1007/s11661-007-9178-6 ↗
10. F. Humphreys, Acta Mater. 45, 4231–4240 (1997)10.1016/S1359-6454(97)00070-0 ↗
11. A. Rollett, W. Mullins, Scripta Mater. 36, 975–980 (1997)10.1016/S1359-6462(96)00501-5 ↗
12. A.D. Rollett, A.P. Brahme, C. Roberts, Mater. Sci. Forum 558, 33–42 (2007)10.4028/www.scientific.net/MSF.558-559.33 ↗
13. A. Morawiec, Scripta Mater. 64, 466–469 (2011)10.1016/j.scriptamat.2010.11.013 ↗
14. Y.C. Zhu, J.H. Mao, F.T. Tan, X.L. Qiao, Appl. Mech. Mater. 127, 89–94 (2012)10.4028/www.scientific.net/AMM.127.89 ↗
15. A. Morawiec, Scripta Mater. 43, 275–278 (2000)10.1016/S1359-6462(00)00403-6 ↗
16. J. Ciulik, E. Taleff, Scripta Mater. 61, 895–898 (2009)10.1016/j.scriptamat.2009.07.021 ↗
17. D.L. Worthington, N.A. Pedrazas, P.J. Noell, E.M. Taleff, Metall. Mater. Trans. A 44A, 5025–5038 (2013)10.1007/s11661-013-1865-x ↗
18. N.A. Pedrazas, T.E. Buchheit, E.A. Holm, E.M. Taleff, Mater. Sci. Eng. A 610, 76–84 (2014)10.1016/j.msea.2014.05.031 ↗
19. P.J. Noell, D.L. Worthington, E.M. Taleff, Metall. Mater. Trans. A 46A, 5708–5718 (2015)10.1007/s11661-015-3188-6 ↗
20. ASTM International: Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip and Foil, Standard Designation B 306–03 (ASTM International, West Conshohocken, PA, 2003)
21. ASTM International: Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys. Standard Designation E 1941-04, ASTM International, West Conshohocken, PA, 2004
22. ASTM International, Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys, Standard Designation E 1941–04 (ASTM International, West Conshohocken, PA, 2008)
23. D.L. Donohue, and J.A. Carter: Metals Handbook, 2nd ed., vol. 10. J.R. Davis, ed., American Society for Metals, Metals Park, OH, 1986, pp. 141–50
24. D.L. Worthington: Characteristics of Dynamic Abnormal Grain Growth in Commercial-Purity Molybdenum, Ph.D. thesis (Austin, TX: The University of Texas at Austin, 2011) pp. 46–88
25. N.A. Pedrazas: Dynamic Abnormal Grain Growth in Selected Refractory Metals, Ph.D. thesis, Austin, TX: The University of Texas at Austin, 2013, pp. 71–190
26. HKL Channel 5: Oxford Instruments PLC, Oxon, U.K.
27. Mathematica 8.0, Wolfram Research, Champaign, IL, 2010
28. D. Brandon, Acta Metall. 14, 1479–1484 (1966)10.1016/0001-6160(66)90168-4 ↗
29. T.A. Bennett, A.D. Rollett, and P.N. Kalu: COM-2006 (Montreal), METSOC, 2006, pp. 217–227
30. S.I. Wright, M.M. Nowell, D.P. Field, Microsc. Microanal. 17, 316–329 (2011)10.1017/S1431927611000055 ↗
31. L. Delannay, O. Mishin, D.J. Jensen, P. Van Houtte, Acta Mater. 49, 2441–2451 (2001)10.1016/S1359-6454(01)00150-1 ↗
32. ASTM International, Standard Test Methods for Determining Average Grain Size, Standard Designation E 112–13 (ASTM International, West Conshohocken, PA, 2013)
33. G. Gottstein, L.S. Shvindlerman, Grain Boundary Migration in Metals: Thermodynamics, Kinetics, Applications, 2nd edn. (CRC Press, New York, 2009), pp. 140–14410.1201/9781420054361 ↗
34. D.D. Sam, B.L. Adams, Metall. Trans. A 17, 513–517 (1986)10.1007/BF02643958 ↗
35. J.-H. Cho, Y. Kim, K. Oh, J.-S. Cho, J.-T. Moon, J. Lee, Y. Cho, A. Rollett, Metall. Mater. Trans. A 34, 1113–1125 (2003)10.1007/s11661-003-0131-z ↗
36. C. Merriman, D. Field, P. Trivedi, Mater. Sci. Eng. A 494, 28–35 (2008)10.1016/j.msea.2007.10.090 ↗
37. L. Tsien, Y. Chow, Proc. R. Soc. A 163, 19–28 (1937)10.1098/rspa.1937.0207 ↗
38. R. Maddin, N. Chen, J. Met. 200, 280–284 (1954)
39. A. Clauer, B. Wilcox, J. Hirth, Acta Metall. 18, 367–379 (1970)10.1016/0001-6160(70)90151-3 ↗
40. E. Zasimchuk, V. Krivenyuk, O. Marusii, Strength Mater. 6, 455–460 (1974)10.1007/BF01528242 ↗