journal article·2016-09

Numerical Study of Microstructural Evolution During Homogenization of Al-Si-Mg-Fe-Mn Alloys

Pikee Priya, David R. Johnson, Matthew J. M. Krane

Publisher page

Abstract

Microstructural evolution during homogenization of Al-Si-Mg-Fe-Mn alloys occurs in two stages at different length scales: while holding at the homogenization temperature (diffusion on the scale of the secondary dendrite arm spacing (SDAS) in micrometers) and during quenching to room temperature (dispersoid precipitation at the nanometer to submicron scale). Here a numerical study estimates microstructural changes during both stages. A diffusion-based model developed to simulate evolution at the SDAS length scale predicts homogenization times and microstructures matching experiments. That model is coupled with a Kampmann Wagner Neumann-based precipitate nucleation and growth model to study the effect of temperature, composition, as-cast microstructure, and cooling rates during posthomogenization quenching on microstructural evolution. A homogenization schedule of 853 K (580 °C) for 8 hours, followed by cooling at 250 K/h, is suggested to optimize microstructures for easier extrusion, consisting of minimal α-Al(FeMn)Si, no β-AlFeSi, and Mg2Si dispersoids <1 μm size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. D. Lassance, M. Schmitz, F. Delannay, and T. Pardoen: 15th Eur. Conf. Fract. Adv. Fract. Mech. Life Saf. Assess., 2004.
2. T Minoda, H Hayakawa, and H Yoshida: Keikinzoku/Journal Japan Inst. Light Met., 1999, vol. 49, pp. 253–57.10.2464/jilm.49.253 ↗
3. [3] S. Zajac, B Hutchinson, A Johansson, and L.O. Gullman: Mater. Sci. Technol., 1994, vol. 10, pp. 323–33.10.1179/mst.1994.10.4.323 ↗
4. [4] Grażyna Mrówka-Nowotnik, J Sieniawski, and M Wierzbińska: J. Achiev. Mater. Manuf. Eng., 2007, vol. 20, pp. 7–8.
5. NCW Kuijpers, FJ Vermolen, K Vuik, and S Zwaag: Mater. Trans., 2003, vol. 44, pp. 1448–56.10.2320/matertrans.44.1448 ↗
6. [6] Mindong Cai, Joseph D. Robson, Gordon W. Lorimer, and N.C. Parson: Mater. Sci. Forum, 2002, vol. 396-402, pp. 209–14.10.4028/www.scientific.net/MSF.396-402.209 ↗
7. [7] Benjamin Milkereit, Nelia Wanderka, Christoph Schick, and Olaf Kessler: Mater. Sci. Eng. A, 2012, vol. 550, pp. 87–96.10.1016/j.msea.2012.04.033 ↗
8. HJ McQueen, S Spigarelli, ME Kassner, and E Evangelista: Hot Deformation and Processing of Aluminum Alloys, CRC Press, New York 2011.
9. [9] Yücel Birol: J. Mater. Process. Technol., 2004, vol. 148, pp. 250–58.10.1016/j.jmatprotec.2004.01.056 ↗
10. [10] Yucel Birol: Mater. Charact., 2013, vol. 80, pp. 69–75.10.1016/j.matchar.2013.03.013 ↗
11. [11] Yucel Birol: Metall. Mater. Trans. A, 2013, vol. 44, pp. 504–11.10.1007/s11661-012-1379-y ↗
12. Y Sun, DR Johnson, K Trumble, P Priya, MJM Krane: Light Met. 2014, 2014, pp. 429–33.
13. G.N. Haidemenopoulos, H. Kamoutsi, A.D. Zervaki: J. Mater. Process. Technol., 2012, vol. 212, pp. 2255–60.10.1016/j.jmatprotec.2012.06.026 ↗
14. [14] S. Y. Hu and L. Q. Chen: Acta Mater., 2001, vol. 49, pp. 1879–90.10.1016/S1359-6454(01)00118-5 ↗
15. [15] J. Z. Zhu, Z. K. Liu, V. Vaithyanathan, and L. Q. Chen: Scr. Mater., 2002, vol. 46, pp. 401–6.10.1016/S1359-6462(02)00013-1 ↗
16. V Vaithyanathan, C Wolverton, and L Q Chen: Phys. Rev. Lett., 2002, vol. 88, p. 125503.10.1103/PhysRevLett.88.125503 ↗
17. MJM Krane, DR Johnson, S Raghavan: Appl. Math. Model., 2009, vol. 33, pp. 2234–47.10.1016/j.apm.2008.06.007 ↗
18. R. Shao, K.P. Trumble, M.J.M. Krane (2009) Model. Cast. Weld. Adv. Solidif. Process 9:495–503
19. S Patankar: Numerical Heat Transfer and Fluid Flow, Taylor & Francis, Oxfordshire, 1980.
20. R A Swalin: Thermodynamics of Solids, Wiley, New York, 1972.
21. C.A. Gandin and A. Jacot: Acta Mater., 2007, vol. 55, pp. 2539–53.10.1016/j.actamat.2006.11.047 ↗
22. [22] O.R. Myhr and Ø Grong: Acta Mater., 2000, vol. 48, pp. 1605–15.10.1016/S1359-6454(99)00435-8 ↗
23. [23] Sharen J. Cummins, Marianne M. Francois, and Douglas B. Kothe: Comput. Struct., 2005, vol. 83, pp. 425–34.10.1016/j.compstruc.2004.08.017 ↗
24. J Yanke, K Fezi, RW Trice, MJM Krane: Numer. Heat Transf. Part A Appl., 2015, vol. 67, pp. 268–92.10.1080/10407782.2014.937208 ↗
25. P H Thévoz, J L Desbiolles, and M Rappaz: Metall. Trans. A, 1989, vol. 20, pp. 311–22.10.1007/BF02670257 ↗
26. Pikee Priya, Matthew J M Krane, and David R Johnson: Light Met. 2014, 2014, pp. 421–28.
27. G.A. Edwards, K. Stiller, G.L. Dunlop, and M.J. Couper: Acta Mater., 1998, vol. 46, pp. 3893–3904.10.1016/S1359-6454(98)00059-7 ↗
28. N.C.W. Kuijpers: TU Delft, Delft University of Technology, 2004.
29. Int. Alloy Des. Chem. Compos. Limits Wrought Alum. Wrought Alum. Alloy. 2015. Alum. Assoc. Arlington., n.d.
30. [30] Gang Sha, Keyna O’Reilly, Brian Cantor, John Worth, and Richard Hamerton: Mater. Sci. Eng. A, 2001, vol. 304-306, pp. 612–16.10.1016/S0921-5093(00)01545-8 ↗
31. LF Mondolfo: Aluminum Alloys: Structure and Properties, Elsevier, Amsterdam, 2013.
32. [32] Melvin Avrami: J. Chem. Phys, 1941, vol. 9, pp. 177–84.10.1063/1.1750872 ↗
33. WA Johnson, RF Mehl: Trans. Aime, 1939, vol. 135, pp. 396–415.
34. [34] J W Christian: The Theory of Transformations in Metals and Alloys, Pergamon Press, Oxford, 1977.
35. [35] A. Verma, S. Kumar, P.S. Grant, and K.A.Q. O’Reilly: J. Alloys Compd., 2013, vol. 555, pp. 274–82.10.1016/j.jallcom.2012.12.077 ↗
36. [36] C. Hsu, K.A.Q. O’Reilly, B. Cantor, and R. Hamerton: Mater. Sci. Eng. A, 2001, vol. 304-306, pp. 119–24.10.1016/S0921-5093(00)01467-2 ↗
37. [37] M.W. Meredith, John Worth, and Richard Hamerton: Mater. Sci. Forum, 2002, vol. 396-402, pp. 107–12.10.4028/www.scientific.net/MSF.396-402.107 ↗
38. [38] Gang Sha, Keyna O’Reilly, Brian Cantor, Richard Hamerton, and John Worth: Mater. Sci. Forum, 2000, vol. 331-337, pp. 253–58.10.4028/www.scientific.net/MSF.331-337.253 ↗
39. [39] Yucel Birol: Mater. Charact., 2012, vol. 73, pp. 37–42.10.1016/j.matchar.2012.07.015 ↗
40. V.I. Johannes and C.W. Jowett: Six Int. Alum. Extrus. Technol. Semin., 1996.
41. J. Asensio-Lozano, B. Suarez-Pena, and G.F.V. Voort: Materials., 2014, vol. 7, pp. 4224–42.10.3390/ma7064224 ↗