journal article·2016-06Open access

EBSD Study of the Influence of a High Magnetic Field on the Microstructure and Orientation of the Al-Si Eutectic During Directional Solidification

Xi Li, Yves Fautrelle, Annie Gagnoud, Zhongming Ren, Rene Moreau

Abstract

The effect of a high magnetic field on the morphology of the Al-Si eutectic was investigated using EBSD technology. The results revealed that the application of the magnetic field modified the morphology of the Al-Si eutectic significantly. Indeed, the magnetic field destroyed the coupled growth of the Al-Si eutectic and caused the formation of the divorced alpha-Al and Si dendrites at low growth speeds (a parts per thousand currency sign1 mu m/s). The magnetic field was also found to refine the eutectic grains and reduce the eutectic spacing at the initial growth stage. Moreover, the magnetic field caused the occurrence of the columnar-to-equiaxed transition of the alpha-Al phase in the Al-Si eutectic. The abovementioned effects were enhanced as the magnetic field increased. This result should be attributed to the magnetic field restraining the interdiffusion of Si and Al atoms in liquid ahead of the liquid/solid interface and the thermoelectric magnetic force acting on the eutectic lamellae under the magnetic field.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. [1] N. Fat-Halla: J. Mater. Sci., 1987, vol. 22, pp. 1013-1018.10.1007/BF01103544 ↗
2. [2] F.T. Lee, J.F. Major and F.H. Samuel: Fatigue Fract. Eng. Mater. Struct., 1995, vol. 18, pp. 385-396.10.1111/j.1460-2695.1995.tb00885.x ↗
3. [3] S. Nishido, M. Kaneso, T. Kobayashi and H. Toda: Int. J. Cast Met. Res., 2004, vol. 17, pp. 345-350.10.1179/136404604225022702 ↗
4. [4] K.J. Oswalt and M.S. Misra: AFS Trans., 1980, vol. 88, pp. 845-862.
5. [5] Y.N. Kwon, Y.S. Lee and J.H. Lee: J. Mater. Process. Technol., 2007, vol. 187, pp. 533-536.10.1016/j.jmatprotec.2006.11.207 ↗
6. [6] W.F. Miao and D.E. Laughlin: Scr. Mater., 1999, vol. 40, pp. 873-878.10.1016/S1359-6462(99)00046-9 ↗
7. [7] C.D. Lee: Mater. Sci. Eng., A, 2007, vol. 464, pp. 249-254.10.1016/j.msea.2007.01.130 ↗
8. [8] H.Z. Ye: J. Mater. Eng. Perform., 2003, vol. 12, pp. 288-297.10.1361/105994903770343132 ↗
9. [9] H. Yamagata, H. Kurita and M. Aniolek: J. Mater. Process. Technol., 2009, vol. 199, pp. 84-90.10.1016/j.jmatprotec.2007.08.007 ↗
10. [10] M. Okayasu, Y. Ohkura and S. Takeuchi: Mater. Sci. Eng., A, 2012, vol. 543, pp. 185-192.10.1016/j.msea.2012.02.073 ↗
11. [11] K. Ding, H.C. Liao, Q.M. Jin and Y. Tang: Mater. Sci. Eng., A, 2010, vol. 527, pp. 6887-6892.10.1016/j.msea.2010.07.068 ↗
12. [12] H.Y. Geng, Y.X. Li, C. Xiang and W. Xue: Scr. Mater., 2005, vol. 53, pp. 69-73.10.1016/j.scriptamat.2005.03.011 ↗
13. S. Farahany, A. Ourdjini, T.A.A. Bakar and M.H. Idris: Metall. Mater. Trans. A, 2014, vol. 45, pp. 1085-1088.10.1007/s11661-013-2158-0 ↗
14. [14] F. Wang, Z. Liu, D. Qiu, J.A. Taylor, M.A. Easton and M.X. Zhang: Acta Mater. 2013, vol. 61, pp. 360-370.10.1016/j.actamat.2012.09.075 ↗
15. [15] K.N. Prabhu and B.N. Ravishankar: Mater. Sci. Eng., A, 2003, vol. 360, pp. 293-298.10.1016/S0921-5093(03)00467-2 ↗
16. [16] M.M. Makhlouf and H.V. Guthy: J. Light Met., 2001, vol. 1, pp. 199-218.10.1016/S1471-5317(02)00003-2 ↗
17. [17] K. Nogita, S.D. McDonald, A.K. Dahle: Mater. Trans. 2004, vol. 45 pp. 323–326.10.2320/matertrans.45.323 ↗
18. [18] K. Nogita, H. Yasuda, M. Yoshiya, S.D. McDonald, K. Uesugi, A. Takeuchi, et al.: J. Alloys Compd. 2010, vol.489 pp. 415–420.10.1016/j.jallcom.2009.09.138 ↗
19. [19] J.H. Li, X.D. Wang, T.H. Ludwig, Y. Tsunekawa, L. Arnberg, J.Z. Jiang, P. Schumacher: Acta Materialia 2015, vol 84, pp.153–163.10.1016/j.actamat.2014.10.064 ↗
20. [20] R. Trivedi, F. Jin and I.E. Anderson: Acta Mater., 2003, vol. 51, pp. 289-300.10.1016/S1359-6454(02)00226-4 ↗
21. [21] M. Gremaud, D.R. Allen, M. Rappaz, and J.H. Perepezko: Acta Mater., 1996, vol. 44, pp. 2669-2681.10.1016/1359-6454(95)00393-2 ↗
22. [22] E. Karakoese and M. Keskin: J. Alloys Compd., 2009, vol. 479, pp.230-236.10.1016/j.jallcom.2009.01.006 ↗
23. [23] Z. Chen, Y. Lei and H. Zhang: J. Alloys Compd., 2011, vol. 509, pp. 7473-7477.10.1016/j.jallcom.2011.04.082 ↗
24. [24] J.H. Li, M.Z. Zarif, G. Dehm and P. Schumacher: Philos. Mag., 2012, vol. 92, pp. 3789-3805.10.1080/14786435.2012.687840 ↗
25. Y.H. Zhang, X.C. Miao, Z.Y. Shen, Q.Y. Han, C.J. Song and Q.J. Zhai: Acta Mater., 2015, vol. 97, pp. 357–66.10.1016/j.actamat.2015.07.002 ↗
26. [26] D. Räbiger, Y.H. Zhang, V. Galindo, S. Franke, B. Willers and S. Eckert: Acta Mater., 2014, vol. 79, pp. 327-338.10.1016/j.actamat.2014.07.037 ↗
27. [27] Z. Li, X. Zhao, L. Zuo, C. Esling and Y. Zhang: Acta Mater., 2011, vol. 59, pp. 3390-3397.10.1016/j.actamat.2011.02.014 ↗
28. [28] P.Q. Zheng, N.J. Kucza, Z.L. Wang, P. Müllner and D.C. Dunand: Acta Mater., 2015, vol. 86, pp. 95–101.10.1016/j.actamat.2014.12.005 ↗
29. [29] Y.Y. Gong, D.H. Wang, Q.Q. Cao, Y.W. Du, T. Zhi, B.C. Zhao, J.M. Dai, Y.P. Sun, H.B. Zhou, Q.Y. Lu and J. Liu: Acta Mater., 2015, vol. 98, pp. 113–118.10.1016/j.actamat.2015.07.026 ↗
30. [30] D.H. Kim, P.M. Adornato and R.A. Brown: J. Cryst. Growth, 1988, vol. 89, pp. 339-356.10.1016/0022-0248(88)90419-8 ↗
31. [31] S. Motakef: J. Cryst. Growth, 1990, vol. 104, pp. 833-850.10.1016/0022-0248(90)90109-X ↗
32. [32] P.J. Prescott and F.P. Incropera: J. Heat Transfer, 1993, vol. 115, pp. 302-310.10.1115/1.2910680 ↗
33. [33] A.E. Mikelson and Y.K. Karklin: J. Cryst. Growth, 1981, vol. 52, pp. 524-529.10.1016/0022-0248(81)90333-X ↗
34. [34] D.E. Farrel, B.S. Chandrasekhar, M.R. DeGuire, M.M. Fand, V.G. Kogan, J.R. Clem and D.K. Finnemore: Phys. Rev. B, 1987, vol. 36, pp. 4025-4027.10.1103/PhysRevB.36.4025 ↗
35. [35] M. Yamaguchi and Y. Tanimoto: Magneto-Science, Springer, Heidelberg, 2006.10.1007/978-3-540-37062-8 ↗
36. [36] J.A. Shercliff: J. Fluid Mech., 1979, vol. 91, pp. 231-251.10.1017/S0022112079000136 ↗
37. [37] T. Izumi and Y. Shiohara: J. Mater. Res., 1993, vol. 7, pp. 16-23.10.1557/JMR.1992.0016 ↗
38. [38] T. Izumi, Y. Nakamura and Y. Shiohara: J. Cryst. Growth, 1993, vol. 128, pp. 757-761.10.1016/S0022-0248(07)80039-X ↗
39. [39] R. Glardon and W. Kurz: J. Cryst. Growth, 1981, vol. 51, pp. 283-291.10.1016/0022-0248(81)90312-2 ↗
40. [40] K.G. Knoch, B. Reinsch and G. Petzow: Z. MetaIlkd., 1994, vol. 85, pp. 350-353.
41. [41] S. Asai: Sci. Technol. Adv. Mater., 2000, vol. 1, pp. 191-200.10.1016/S1468-6996(00)00016-4 ↗
42. [42] X. Li, Z.M. Ren, Y. Fautrelle, A. Gagnoud, Y.D. Zhang and C. Esling: Scr. Mater., 2009, vol. 60, pp. 443-446.10.1016/j.scriptamat.2008.11.036 ↗
43. [43] X. Li, Y.D. Zhang, Y. Fautrelle, Z.M. Ren and C. Esling: Scr. Mater., 2009, vol. 60, pp. 489-492.10.1016/j.scriptamat.2008.11.038 ↗
44. [44] X. Li, A. Gagnoud, Y. Fautrelle, Z.M. Ren, R. Moreau, Y.D. Zhang and C. Esling: Acta Mater., 2012, vol. 60, pp. 3321-3332.10.1016/j.actamat.2012.02.019 ↗
45. [45] V. Botton, P. Lehmann, R. Bolcato, R. Moreau and R. Haettel: Int. J. Heat Mass Transfer, 2001, vol. 44, pp. 3345-3357.10.1016/S0017-9310(00)00362-8 ↗
46. H.Q. Hu: Metal Solidification Theory. Chinese Mechanical Publishing Company, Beijing, 2000, p. 187.
47. [47] D.F. Wan and S.H. Luo: Physics of Magnetism, Electronic Industry Press, Beijing, 1987, p.22.
48. [48] P. Lehmann, R. Moreau, D. Camel and R. Bolcato: Acta Mater., 1998, vol. 46, pp. 4067-4079.10.1016/S1359-6454(98)00064-0 ↗