A Novel Ni-Containing Powder Metallurgy Steel with Ultrahigh Impact, Fatigue, and Tensile Properties
Source abstract
Abstract
The impact toughness of powder metallurgy (PM) steel is typically inferior, and it is further impaired when the microstructure is strengthened. To formulate a versatile PM steel with superior impact, fatigue, and tensile properties, the influences of various microstructures, including ferrite, pearlite, bainite, and Ni-rich areas, were identified. The correlations between impact toughness with other mechanical properties were also studied. The results demonstrated that ferrite provides more resistance to impact loading than Ni-rich martensite, followed by bainite and pearlite. However, Ni-rich martensite presents the highest transverse rupture strength (TRS), fatigue strength, tensile strength, and hardness, followed by bainite, pearlite, and ferrite. With 74 pct Ni-rich martensite and 14 pct bainite, Fe-3Cr-0.5Mo-4Ni-0.5C steel achieves the optimal combination of impact energy (39 J), TRS (2170 MPa), bending fatigue strength at 2 × 106 cycles (770 MPa), tensile strength (1323 MPa), and apparent hardness (38 HRC). The impact energy of Fe-3Cr-0.5Mo-4Ni-0.5C steel is twice as high as those of the ordinary high-strength PM steels. These findings demonstrate that a high-strength PM steel with high-toughness can be produced by optimized alloy design and microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. R.J. Bourcier, D.A. Koss, R.E. Smelser, and O. Richmond: Acta Metall., 1986, vol. 34, pp. 2443–53.10.1016/0001-6160(86)90147-1 ↗
2. N. Chawla and X. Deng: Mater. Sci. Eng. A, 2005, vol. 390, pp. 98–112.10.1016/j.msea.2004.08.046 ↗
3. H. Danninger, D. Spoljaric, and B. Weiss: Int. J. Powder Metall., 1997, vol. 33, pp. 43–53.
4. M. Campos, J. Sicre-Artalejo, J.J. Munoz, and J.M. Torralba: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1847–54.10.1007/s11661-010-0212-8 ↗
5. M. Gauthier, S. Metcalfe, S. Pelletier, and T.F. Stephenson: Powder Metall., 2011, vol. 54, pp. 628–35.10.1179/1743290110Y.0000000009 ↗
6. B.A. Gething, D.F. Heaney, D.A. Koss, and T.J. Mueller: Mater. Sci. Eng. A, 2005, vol. 390, pp. 19–26.10.1016/j.msea.2004.05.087 ↗
7. M.W. Wu and K.S. Hwang: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3577–85.10.1007/s11661-006-1052-4 ↗
8. M.W. Wu, K.S. Hwang, and H.S. Huang: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1598–607.10.1007/s11661-007-9201-y ↗
9. X. Deng, G. Piotrowski, N. Chawla, and K.S. Narasimhan: Mater. Sci. Eng. A, 2008, vol. 491, pp. 28–38.10.1016/j.msea.2008.01.021 ↗
10. S. St-Laurent and F. Chagnon: Adv. Powder Metall. Part. Mater., 2002, part 5, pp. 121–35.
11. D. Shanmugasundaram and R. Chandramouli: Mater. Des., 2009, vol. 30, pp. 3444–9.10.1016/j.matdes.2009.03.020 ↗
12. N. Candela, F. Velasco, and J.M. Torralba: Mater. Sci. Eng. A, 1999, vol. 259, pp. 98–104.10.1016/S0921-5093(98)00865-X ↗
13. M.W. Wu, L.C. Tsao, G.J. Shu, and B.H. Lin: Mater. Sci. Eng. A, 2012, vol. 538, pp. 135–44.10.1016/j.msea.2011.12.113 ↗
14. M.W. Wu, L.C. Tsao, and S.Y. Chang: Mater. Sci. Eng. A, 2013, vol. 565, pp. 196–202.10.1016/j.msea.2012.12.032 ↗
15. G. Straffelini, V. Fontanari, A. Molinari: Mater. Sci. Eng. A, 1999, vol. 272, pp. 389–97.10.1016/S0921-5093(99)00494-3 ↗
16. G. Straffelini, A. Molinari, and H. Danninger: Mater. Sci. Eng. A, 1999, vol. 272, pp. 300–9.10.1016/S0921-5093(99)00491-8 ↗
17. H. Danninger, C. Xu, G. Khatibi, B. Weiss, and B. Lindqvist: Powder Metall., 2012, vol. 55, pp. 378–87.10.1179/1743290112Y.0000000001 ↗
18. F. Bernier, P. Plamondon, J.P. Baïlon, and G. L’Espèrance: Powder Metall., 2011, vol. 54, pp. 559–65.10.1179/1743290111Y.0000000006 ↗
19. A. Bergmark and L. Alzati: Fatigue Fract. Eng. Mater. Struct., 2005, vol. 28, pp. 229–35.10.1111/j.1460-2695.2004.00841.x ↗
20. K.V. Sudhakar: Int. J. Fatigue, 2000, vol. 22, pp. 729–34.10.1016/S0142-1123(00)00067-0 ↗
21. H. D’Armas, L. Llanes, J. Peñafiel, J. Bas, and M. Anglada: Mater. Sci. Eng. A, 2000, vol. 277, pp. 291–6.10.1016/S0921-5093(99)00533-X ↗
22. M.W. Wu and K.S. Hwang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5421–9.10.1016/j.msea.2010.05.089 ↗
23. J.M. Torralba, A. Navarro, and M. Campos, Mater. Sci. Eng. A, 2013, vol. 573, pp. 253–6.10.1016/j.msea.2013.02.034 ↗
24. R. Oro, M. Campos, J.M. Torralba, and C. Capdevila: Powder Metall., 2012, vol. 55, pp. 294–301.10.1179/1743290112Y.0000000016 ↗
25. J.M. Torralba, R. Oro, and M. Campos: Mater. Sci. Forum, 2011, vol. 672, pp. 3–11.10.4028/www.scientific.net/MSF.672.3 ↗
26. B. Tougas, C. Blais, F. Chagnon, and S. Pelletier: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 754–65.10.1007/s11661-012-1417-9 ↗
27. B. Tougas, C. Blais, F. Chagnon,and S. Pelletier: Powder Metall., 2012, vol. 55, pp. 348–53.10.1179/1743290112Y.0000000014 ↗
28. S. Carabajar, C. Verdu, and R. Fougeres: Mater. Sci. Eng. A, 1997, vol. 232, pp. 80–7.10.1016/S0921-5093(97)00100-7 ↗
29. E. Dudrová, M. Kabatova, and M. Kupkova: Kov. Mater., 2002, vol. 40, pp. 24–33.
30. H. Abdoos, H. Khorsand, and A.R. Shahani: Mater. Des., 2009, vol. 30, pp. 1026–31.10.1016/j.matdes.2008.06.050 ↗
31. P. Wang and K.S. Kumar: Mater. Sci. Eng. A, 2009, vol. 519, pp. 184–97.10.1016/j.msea.2009.04.063 ↗
32. K.H. Lee, S.G. Park, M.C. Kim, and B.S. Lee: Mater. Sci. Eng. A, 2012, vol. 534, pp. 75–82.10.1016/j.msea.2011.11.043 ↗
33. S.J. Wu, G.J. Sun, Q.S. Ma, Q.Y. Shen, and L. Xu: J. Mater. Process. Technol., 2013, vol. 213, pp. 120–8.10.1016/j.jmatprotec.2012.08.005 ↗
34. K.S. Hwang, C. Hsu, L.H. Cheng, and P.H. Chen: Int. J. Powder Metall., 2012, vol. 48, pp. 35–43.
35. J.R. Davis: Carbon and Alloy Steels, ASM International, Materials Park, OH, 1996, pp. 269–88.
36. N. Saeidi and A. Ekrami: Mater. Sci. Eng. A, 2009, vol. 523, pp. 125–9.10.1016/j.msea.2009.06.057 ↗
37. M. Momeni, H. Danninger, C. Gierl, E. Dudrová, and A. Arvand: Powder Metall. Prog., 2011, vol. 11, pp. 62–8.
38. MPIF Standard 35, Materials Standards for PM Structural Parts, 2009 ed., Metal Powder Industries Federation, Princeton, NJ, 2009.
39. S. Saccarola, M. Zanon, A. Karuppannagounder, and F. Castro: Adv. Powder Metall. Part. Mater., 2011, part 7, pp. 45–53.
40. I. Donaldson, M. Marucci, and B. Lindsley: Adv. Powder Metall. Part. Mater., 2011, part 7, pp. 54–63.