Effect of boron on the hot ductility of the Nb-microalloyed steel in austenite region
Source abstract
Abstract
Two grades of the Nb-microalloyed steel, one modified with B, were subjected toin situ melting and the thermal schedules experienced by the billet surface in the continuous casting process. The hot ductility was evaluated at various temperatures at the straightening stage of the process. It was found that addition of B improves the hot ductility in the austenite region. Such improvement could be due to fast precipitation at grain boundaries as well as depletion of precipitants and strengthening elements in the matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. B. Mintz, S. Yue, and J.J. Jonas:Int. Mater. Rev., 1991, vol. 36, pp. 187–217.10.1179/imr.1991.36.1.187 ↗
2. W.T. Lankford:Metall. Trans., 1972, vol. 3, pp. 1331–57.10.1007/BF02643017 ↗
3. K. Suzuki, S. Miyagawa, Y. Saito, and K. Shiotani:ISIJ Int., 1995, vol. 35, pp. 34–41.10.2355/isijinternational.35.34 ↗
4. O. Comineli, R. Abushosha, and B. Mintz:Mater. Sci. Technol., 1999, vol. 15, pp. 1058–68.10.1179/026708399101506788 ↗
5. B. Mintz, Z. Mohamed, and R. Abushosha:Mater. Sci. Technol., 1989, vol. 5, pp. 682–88.10.1179/mst.1989.5.7.682 ↗
6. S.K. Kim, J.S. Kim, and N.J. Kim:Metall. Mater. Trans. A, 2002, vol. 33A, pp. 701–04.10.1007/s11661-002-0133-2 ↗
7. F. Zarandi: Ph.D. Thesis, McGill University, 2004.
8. H.G. Suzuki, S. Nishimura, J. Imamura, and Y. Nakamura:Trans. ISIJ., 1984, vol. 24, pp. 169–77.10.2355/isijinternational1966.24.169 ↗
9. S.H. Cho, K.B. Kang, and J.J. Jonas:Mater. Sci. Technol., 2002, vol. 18, pp. 389–95.10.1179/026708302225001859 ↗
10. S.S.J.B. Vander Sande and M. Cohen:Metall. Trans. A, 1980, vol. 11A, pp. 387–402.
11. M. Militzer, W.P. Sun, and J.J. Jonas:Acta Metall. 1994, vol. 24, pp. 133–41.10.1016/0956-7151(94)90056-6 ↗
12. X.L. He, M. Djahazi, J.J. Jonas, and J. Jackman:Acta Metall., 1991, vol. 39, pp. 2295–308.10.1016/0956-7151(91)90012-P ↗
13. X.L. He, Y.Y. Chu, and J.J. Jonas:Acta Metall., 1989, vol. 37, pp. 147–61.10.1016/0001-6160(89)90274-5 ↗
14. L. Karlsson:Acta Metall., 1988, vol. 36, pp. 25–34.10.1016/0001-6160(88)90025-9 ↗
15. L. Karlsson and H. Norden:Acta Metall., 1988, vol. 36, pp. 13–24.10.1016/0001-6160(88)90024-7 ↗
16. W.J. Liu:Metall. Trans. A, 1995, vol. 26A, pp. 1641–57.10.1007/BF02670752 ↗
17. M. Cohen:Trans. Jap. Inst. Met., 1970, vol. 11, pp. 145–51.10.2320/matertrans1960.11.145 ↗
18. M. Djahazi: Ph.D. Thesis, McGill University, 1990.
19. R. Abushosha, O. Comineli, and B. Mintz:Mater. Sci. Technol., 1999, vol. 15, pp. 278–86.10.1179/026708399101505842 ↗
20. M. Djahazi, X.L. He, J.J. Jonas, and W.P. Sun:Metall. Trans. A, 1992, vol. 23A, pp. 2111–20.10.1007/BF02646004 ↗
21. H.J. Grabke:Impurities in Engineering Materials, edited by Clyde L. Briant. Marcel Dekker Inc., 1999, pp. 143–92.