journal article·2015-02

Microstructural Evolution in Novel Suction Cast Multicomponent Ti-Fe-Co Alloys

Sumanta Samal, Swapnil Agarwal, Priya Gautam, Krishanu Biswas

Publisher page

Abstract

The present work is aimed at understanding the solidification pathways of the Ti-rich Ti-Fe-Co in situ composites consisting of ultrafine eutectic with micron-scale dendrites. The effect of addition of Co in the Ti-rich binary Ti-Fe alloys has been systematically investigated. The series of Ti-Fe-Co ternary alloys i.e., Ti75Fe25−x Co x (x = 0, 5, 10, 12.5, 15, 20), (Ti70.5Fe29.5)100−x Co x (x = 0, 2, 4, 6, 8, and 10), Ti70Fe30−x Co x (x = 0, 5, 10, 15, 20, 25), Ti65Fe35−x Co x (x = 0, 10, 15, 17.5, 20, 25), and Ti60Fe40−x Co x (x = 0, 16, 18, 20, 22, 24) are synthesized by arc melting cum suction casting technique under high purity Ar atmosphere to obtain alloy cylinders having diameter (ϕ) of 3 mm. Detailed X-ray diffraction and electron microscopic (SEM and TEM) study are carried out to identify the phases as well as to monitor the sequence of phase evolution in the ternary alloys. The present study conclusively proves that the Ti65Fe10Co25, Ti70Fe30−x Co x (x = 10, 20, 25), and Ti75Fe15Co10 alloys show the ternary quasi-peritectic reaction of L + Ti(Co,Fe) → (β-Ti)ss + Ti2(Co,Fe) at invariant point P (=Ti75.5±0.8Fe6.3±2.1Co18.2±2.7) which is cooperated by means of eutectic reaction of L → (β-Ti)ss + Ti2(Co,Fe) below P and peritectic reaction L + Ti(Co,Fe) → Ti2(Co,Fe) for Ti65Fe10Co25,Ti70Fe10Co20, and Ti70Fe5Co25 alloys or eutectic reaction L → (β-Ti)ss +Ti(Co,Fe) for Ti70Fe20Co10, and Ti75Fe15Co10 alloys above the point P. In addition, the peritectic reaction L + Ti(Co,Fe) → Ti2(Co,Fe) plays a significant role in the phase evolution. The microstructural evolution, phase equilibria and solidification pathways have been explained by generating liquidus projection of the investigated alloys. Interestingly, the Co addition leads to the formation of complex Ti2Co phase and significantly affects the compositional stability of TiFe phase. This is found to have significant influence on the microstructural development during suction casting of the investigated alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Metallic Glasses and Amorphous Alloys · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. E.A. Brandes and G.B. Brook: Smithells Metals Reference Book, 7th ed., Butterworths-Heinemann Ltd., Bodmin, 1992.
2. D. V. Louzguine-Luzgin, L. V. Louzguina-Luzgina, H. Kato and A. Inoue: J. All. Comp., 2007, vol. 434–435, pp. 32–35.10.1016/j.jallcom.2006.08.335 ↗
3. D. V. Louzguine and H. Kato: J. Mater. Res., 2004, vol. 19, pp. 3600-3606.10.1557/JMR.2004.0462 ↗
4. S. Parlapanska and D. Parlapanski: Corrosion Sci., 1977, vol. 39, pp. 1321-1327.10.1016/S0010-938X(97)00031-0 ↗
5. B. A. Kolachev: Metallovedenie i Termicheskaya Obrabotka Metallov, 1993, vol. 10, pp. 28-32.
6. B. Mondal, S. Samal, K. Biswas, and Govind: IOP Conf. Ser. Mater. Sci. Eng., 2011, vol. 27, p. 012025.10.1088/1757-899X/27/1/012025 ↗
7. G. He, J. Eckert, W. Löser and L. Schultz: Nat. Mater., 2003, vol. 2, pp. 33–37.10.1038/nmat792 ↗
8. G. He, W. Löser and J. Eckert: Acta Mater., 2003, vol. 51, pp. 5223-5234.10.1016/S1359-6454(03)00386-0 ↗
9. G. He, J. Eckert, W. Löser and M. Hagiwara: Acta Mater., 2004, vol. 52, pp. 3035-3046.10.1016/j.actamat.2004.03.006 ↗
10. L.C. Zhang, J. Das, H.B. Lu, C. Duhamel, M. Calin and J. Eckert: Scripta Mater., 2007, vol. 57, pp. 101–104.10.1016/j.scriptamat.2007.03.031 ↗
11. J. Das, K.B. Kim, F. Baier, W. Löser and J. Eckert: Appl. Phys. Lett., 2005, vol. 87, pp. 161907-3.10.1063/1.2105998 ↗
12. J. Das, K.B. Kim, W. Xu, W. Löser and J. Eckert: Mater. Sci. Eng. A, 2007, vol. 449–451, pp. 737–740.10.1016/j.msea.2006.02.374 ↗
13. J. Das, K.B. Kim, F. Baier, W. Löser, A. Gebert and J. Eckert: J. All. Comp., 2007, vol. 434–435 pp. 28–31.10.1016/j.jallcom.2006.08.163 ↗
14. J. H. Han, K. B. Kim, S. Yi, J. M. Park, S. W. Sohn, T. E. Kim, D. H. Kim, J. Das and J. Eckert: Appl. Phys. Lett., 2008, vol. 93, pp. 141901-3.10.1063/1.2990662 ↗
15. G.A. Song, J.H. Han, T.E. Kim, J.M. Park, D.H. Kim, S. Yi, Y. Seo, N.S. Lee and K.B. Kim: Intermetall., 2011, vol. 19, pp. 536-540.10.1016/j.intermet.2010.11.030 ↗
16. S. Samal, B. Mondal, K. Biswas, and Govind: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 427–39.10.1007/s11661-012-1404-1 ↗
17. D. V. Louzguine-Luzgin, L. V. Louzguina-Luzgina,V. I. Polkinc and A. Inoue: Scripta Mater., 2007, vol. 57, pp. 445–448.10.1016/j.scriptamat.2007.04.021 ↗
18. D. V. Louzguine, H. Kato and A. Inoue: Phil. Mag. Lett., 2004, vol. 84, pp. 359–364.10.1080/09500830410001728336 ↗
19. L. V. Louzguina-Luzgina, D. V. Louzguine-Luzgin and A. Inoue: Intermetall., 2006, vol. 14, pp. 255–259.10.1016/j.intermet.2005.06.002 ↗
20. D. V. Louzguine-Luzgin, L. V. Louzguina-Luzgina and A. Inoue: Intermetall., 2007, vol. 15, pp. 181-186.10.1016/j.intermet.2006.05.006 ↗
21. D. V. Louzguine-Luzgin, L. V. Louzguina-Luzgina, H. Kato and A. Inoue: Acta Mater., 2005, vol. 53, pp. 2009–2017.10.1016/j.actamat.2005.01.012 ↗
22. S. Samal and K. Biswas: J. Nanopart. Res., 2013, vol. 15, pp. 1-11.10.1007/s11051-013-1783-2 ↗
23. S. Samal, P. Gautam, S. Agarwal and K. Biswas: Mater. Sci. Forum, 2014, vol. 790, pp. 497-502.10.4028/www.scientific.net/MSF.790-791.497 ↗
24. T.B. Massalski: Binary Alloy Phase Diagrams, 2nd ed., ASM International, Metals Park, OH, USA, 1990.
25. M.J. Donachie: Titanium: A Technical Guide, 2nd ed., ASM International, Metals Park OH, 2000, pp. 14–1510.31399/asm.tb.ttg2.9781627082693 ↗
26. R. M. Srivastava, J. Eckert, W. Loser, B. K. Dhindaw and L. Schultz: Mater. Trans. JIM, 2002, vol. 43, pp. 1670-1675.10.2320/matertrans.43.1670 ↗