journal article·2013-02Open access

Portevin–Le Chatelier Effects in a High-Mn Austenitic Steel

Giorgio Scavino, Carolina Di Salvo, Paolo Matteis, Raffaella Sesana, Donato Firrao

Abstract

High-manganese austenitic steels were recently proposed to fabricate structural car body parts because of their very favorable combination of strength and ductility. They exhibit Portevin–Le Chatelier macroscopic plastic localization phenomena at the room temperature, as evidenced by the tensile curves first by the isolated stress peaks corresponding to the nucleation of deformation bands, which travel along the tensile axis, and then by serrations due to static deformation bands. The bands extend to the whole width of the specimen and cause a local temperature increase along with a slight surface relief. These plastic instabilities were studied during tensile tests at strain rates between 0.0004 and 0.04 s−1, with optical video recording, infrared thermography and optical extensometry, the latter based on digital image correlation. Two types of bands, type A and type C, were observed and are described.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. D. Cornette, P. Cugy, A. Hildenbrand, M. Bouzekri, G. Lovato, Revue de Metallurgie, 12 (2005), 905-918.10.1051/metal:2005151 ↗
2. O. Grassel, G. Frommeyer, Materials Science and Technology, 14 (1998), 1213-1217.10.1179/026708398790300891 ↗
3. O. Grassel, L. Kruger, G. Frommeyer, L. W. Meyer, International Journal of Plasticity, 16 (2000), 1391-1409.10.1016/S0749-6419(00)00015-2 ↗
4. P. Yang, Q. Xie, L. Meng, H. Ding, Z. Tang, Scripta Materialia, 55 (2006), 629-631.10.1016/j.scriptamat.2006.06.004 ↗
5. S. Vercammen, B. Blanpain, B.C. De Cooman, P. Wollants, Acta Materialia, 52 (2004), 2005-2012.10.1016/j.actamat.2003.12.040 ↗
6. O. Bouaziz, N. Guelton, Materials Science and Engineering A, 319-321 (2001), 246-249.10.1016/S0921-5093(00)02019-0 ↗
7. S. Allain, J.P. Chateau, O. Bouaziz, Material Science and Engineering A, 387-389 (2004), 143-147.10.1016/j.msea.2004.01.060 ↗
8. S. Allain, J.P. Chateau, O. Bouaziz, Steel Research, 73 (2002) 299-302.10.1002/srin.200200212 ↗
9. G. Frommeyer, U. Brux, P. Neumann, ISIJ International, 43 (2003) 438-446.10.2355/isijinternational.43.438 ↗
10. L. Chen, H.S. Kim, S.K. Kim, B.C. De Cooman, ISIJ International, 47 (2007), 1804-1812.10.2355/isijinternational.47.1804 ↗
11. P.D. Zavattieri, V. Savic, L.G. Hector, J.R. Fekete, W. Tong, Y. Xuan, International Journal of Plasticity, 25 (2009), 2298-2330.10.1016/j.ijplas.2009.02.008 ↗
12. G. Scavino, F. D’Aiuto, P. Matteis, P. Russo Spena, D. Firrao, Metallurgical Materials Transactions A, 41 (2010), 1493-1501.10.1007/s11661-010-0191-9 ↗
13. J.K. Kim, L. Chen, H.S. Kim, S.K. Kim, G.S. Kim, Y. Estrin, B.C. De Cooman, Steel Research International, 80 (2009), 493-498.
14. T.A. Lebedkina, M.A. Lebyodkin, J.P. Chateau, A. Jacques S. Allain, Material Science and Engineering A, 519 (2009) 147-154.10.1016/j.msea.2009.04.067 ↗
15. E. Rizzi, P. Hahner, International Journal of Plasticity, 20 (2004), 121-165.10.1016/S0749-6419(03)00035-4 ↗
16. S. Allain, P. Cugy, C. Scott, J.P. Chateau, A. Rusinek, A. Deschamps, International Journal of Materials Research, 99 (2008), 734-738.10.3139/146.101693 ↗
17. F. Curà, G. Curti, R. Sesana, International Journal of Fatigue, 27 (2005), 453-459.10.1016/j.ijfatigue.2003.12.009 ↗
18. C.A. Griffis, J.W. Spretnak, Transactions of the Iron and Steel Institute of Japan, 9 (1969), 272.10.2355/isijinternational1966.9.372 ↗
19. L. Remy, A. Pineau, Material Science and Engineering, 28 (1977) 99-107.10.1016/0025-5416(77)90093-3 ↗
20. L.J. Cuddy, W.C. Leslie, Acta Metallurgica, 20 (1972), 1157.10.1016/0001-6160(72)90164-2 ↗