Effects of test temperature and grain size on the charpy impact toughness and dynamic toughness (K ID ) of polycrystalline niobium
Source abstract
Abstract
The effects of changes in test temperature (−196 °C to 25 °C) and grain size (40 to 165 µm) on the dynamic cleavage fracture toughness (K ID ) and Charpy impact toughness of polycrystalline niobium (Nb) have been investigated. The ductile-to-brittle transition was found to be affected by both changes in grain size and the severity of stress concentration (i.e., notch vs fatigue-precrack). In addition to conducting impact tests on notched and fatigue-precracked Charpy specimens, extensive fracture surface analyses have been performed in order to determine the location of apparent cleavage nucleation sites and to rationalize the effects of changes in microstructure and experimental variables on fracture toughness. Existing finite element analyses and the stress field distributions ahead of stress concentrators are used to compare the experimental observations with the predictions of various fracture models. The dynamic cleavage fracture toughness, K ID , was shown to be 37±4 MPa√m and relatively independent of grain size (i.e., 40 to 105 µm) and test temperature over the range −196 °C to 25 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. M.G. Mendiratta and D. Dimiduk: Scripta Metall. Mater., 1991, vol. 25, pp. 237–45.10.1016/0956-716X(91)90387-G ↗
2. M. Mendiratta, D. Dimiduk, and J.J. Lewandowski: Metall. Trans., A1999, vol. 22A, pp. 1573–84.
3. J.D. Rigney and J.J. Lewandowski: Metall. Mater. Trans., 1996, vol. 27A, pp. 3292–306.10.1007/BF02663879 ↗
4. J. Kajuch, J. Short, and J.J. Lewandowski: Acta Metall., A, 1995, vol. 43, pp. 1955–67.10.1016/0956-7151(94)00391-T ↗
5. W.A. Zinsser, Jr. and J.J. Lewandowski: Metall. Mater. Trans., A1998, vol. 29A, pp. 1749–57.10.1007/s11661-998-0098-x ↗
6. B.P. Bewlay, J.J. Lewandowski, and M.R. Jackson: JOM, 1997, vol. 49, pp. 44–45.10.1007/BF02914402 ↗
7. A.V. Samant and J.J. Lewandowski: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 389–99.10.1007/s11661-997-0140-4 ↗
8. A.V. Samant and J.J. Lewandowski: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2297–307.10.1007/s11661-997-0187-2 ↗
9. M.A. Adams, A.C. Roberts, and R.E. Smallman: Acta Metall., 1960, vol. 8, pp. 328–37.10.1016/0001-6160(60)90118-8 ↗
10. A.A. Johnson: Acta Metall., 1960, vol. 8, pp. 737–40.10.1016/0001-6160(60)90211-X ↗
11. A.T. Churchman: J. Inst. Met., 1960, vol. 88, pp. 221–22.
12. T.L. Briggs and J.D. Campbell: Acta Metall., 1972, vol. 20, pp. 711–24.10.1016/0001-6160(72)90100-9 ↗
13. Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1994, vol. 03.01.
14. J. Srawley and W. Brown: ASTM Special Technical Publication 410, ASTM, Philadelphia, PA, 1966.
15. J.J. Lewandowski and A.W. Thompson: Metall Trans. A, 1986, vol. 17A, pp. 1769–86.10.1007/BF02817275 ↗
16. D. Padhi: Case Western Reserve University, Cleveland, OH, unpublished research, 2000.
17. T.L. Anderson: Fracture Mechanics—Fundamentals and Applications, 2nd ed., CRC Press, Boca Raton, FL, 1995.
18. S. Nemat-Nasser and W. Guo: Mater. Sci. Eng. A, 1999, vol. 284, pp. 202–10.10.1016/S0921-5093(00)00740-1 ↗
19. R. Sandstrom and Y. Bergstrom: Met. Sci., 1984, vol. 18, pp. 177–86.10.1179/030634584790420203 ↗
20. P. Ludwik: Z. Ver. Deut. Ing., 1927, vol. 71, pp. 1532–36.
21. A.H. Cottrell: Trans. TMS-AIME, 1958, vol. 212, pp. 192–203.
22. J.W. Taylor: J. Inst. Met., 1958, vol. 86, pp. 456–63.
23. J.F. Knott: J. Iron Steel Inst., 1966, vol. 204, pp. 104–11.
24. R.W. Armstrong, G.R. Irwin, and X.J. Zhang: George R. Irwin Symp. Cleavage Fracture, K. Chan, ed., TMS, Warrendale, PA, 1997, pp. 51–58.
25. R.W. Armstrong: Phil. Mag., 1964, vol. 9, pp. 1063–70.10.1080/14786436408211916 ↗
26. R.W. Armstrong: Metall. Trans., 1970, vol. 1, pp. 1169–76.10.1007/BF02900227 ↗
27. N.J. Petch: Acta Metall., 1986, vol. 34, pp. 1387–95.10.1016/0001-6160(86)90026-X ↗
28. J.F. Knott: Fundamentals of Fracture Mechanics, Butterworths, Boston, MA, 1979.
29. A.P. Green and B.B. Hundy: J. Mech. Phys. Solids, 1956, vol. 4, pp. 128–44.10.1016/0022-5096(56)90085-0 ↗
30. G.Z. Wang, J.H. Chen, and J.G. Wang: Int. J. Fracture, 2003, in press.
31. J.R. Griffiths and D.R.J. Owen: J. Mech. Phys. Solids, 1971, vol. 19, pp. 419–31.10.1016/0022-5096(71)90009-3 ↗
32. R. Hill: Mathematical Theory of Plasticity, Oxford University Press, London, 1950.
33. D.R.J. Owen, G.C. Nayak, A.P. Kfouri, and J.R. Griffiths: Int. J. Num. Meth. Eng., 1973, vol. 6, pp. 63–73.10.1002/nme.1620060108 ↗
34. D.J. Alexander, J.J. Lewandowski, and A.W. Thompson: J. Mech. Phys. Solids, 1986, vol. 34, pp. 433–54.10.1016/0022-5096(86)90011-6 ↗
35. J.M. Alexander and T.J. Komoly: J. Mech. Phys. Solids, 1962, vol. 10, pp. 265–75.10.1016/0022-5096(62)90043-1 ↗
36. T.R. Wilshaw and P.L. Pratt: J. Mech. Phys. Solids, 1966, vol. 14, pp. 7–19.10.1016/0022-5096(66)90015-9 ↗
37. R.O. Ritchie, J.F. Knott, and J.R. Rice: J. Mech. Phys. Solids, 1973, vol. 21, pp. 395–410.10.1016/0022-5096(73)90008-2 ↗
38. R.O. Ritchie, B. Francis, and W.L. Server: Metall. Trans. A, 1976, vol. 7A, pp. 831–38.10.1007/BF02644080 ↗
39. D.M. Tracey: ASME J. Eng. Mater. Technol., 1976, vol. 98, pp. 146–51.10.1115/1.3443357 ↗
40. D. Padhi and J.J. Lewandowski: Case Western Reserve University, Cleveland, OH, unpublished research, 2002.
41. J.W. Hutchinson: J. Mech. Phys. Solids, 1968, vol. 16, pp. 13–31.10.1016/0022-5096(68)90014-8 ↗
42. J.R. Rice and G.R. Rosengren: J. Mech. Phys. Solids, 1968, vol. 16, pp. 1–12.10.1016/0022-5096(68)90013-6 ↗