Effect of Solution Temperature on the Microstructure and Mechanical Properties of a Newly Developed Superalloy TMW-4M3
Source abstract
Abstract
The influence of solution temperature on the microstructure and mechanical properties of TMW-4M3 superalloy has been investigated. Comparisons of mechanical properties have also been made between the heat-treated TMW-4M3 variants and the commercial U720Li. The key microstructural variables examined were grain size and the volume fraction and size of the strengthening gamma' precipitates that control the mechanical properties of these alloys. By increasing the solution temperature from 1373 K to 1393 K (1100 A degrees C to 1120 A degrees C), the volume fraction of primary gamma prime dropped from 16.9 pct to 14.5 pct, whereas the average grain size increased from 8.7 mu m to 10.6 mu m. Compared with an alloy with a smaller grain size, the alloy with a larger grain size exhibited superior resistances to creep and fatigue crack growth without the expense of reduced tensile strength and low-cycle fatigue resistance. This suggested that a higher solution temperature may benefit TMW-4M3 in terms of superior overall properties. The greater overall properties of TMW-4M3 variants than that of commercial U720Li were also demonstrated experimentally. The possible explanations for the improvement of mechanical properties were discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, UK, 2006.10.1017/CBO9780511541285 ↗
2. M.P. Jackson and R.C. Reed: Mater. Sci. Eng. A, 1999, vol. 259, pp. 85-97.10.1016/S0921-5093(98)00867-3 ↗
3. R.J. Mitchell, M. Preuss, S. Tin, and M.C. Hardy: Mater. Sci. Eng. A, 2008, vol. 473, pp. 158-65.10.1016/j.msea.2007.04.098 ↗
4. H. Monajati, M. Jahazi, R. Bahrami, and S. Yue: Mater. Sci. Eng. A, 2004, vol. 373, pp. 286-93.10.1016/j.msea.2004.01.027 ↗
5. J.Y. Hwang, S. Nag, A.R.P. Singh, R. Srinivasan, J. Tiley, G.B. Viswanathan, H.L. Fraser, and R. Banerjee: Metall. Mater. Trans. A, vol. 40A, 2009, pp. 3059-68.10.1007/s11661-009-0075-z ↗
6. K.R. Bain, M.L. Gambone, J.M. Hyzak, and M.C. Thomas: Superalloys, 1988, S. Reichman, D.N. Duhl, G. Maurer, S. Antolovich, and C. Lund, eds., TMS, Warrendale, PA, 1988, pp. 13–22.10.7449/1988/Superalloys_1988_13_22 ↗
7. Y.F. Gu, H. Harada, C.Y. Cui, D.H. Ping, A. Sato, and J. Fujioka: Scripta Mater., 2006, vol. 55, pp. 815-18.10.1016/j.scriptamat.2006.07.008 ↗
8. S. Behrouzghaemi and R.J. Mitchell: Mater. Sci. Eng. A, 2008, vol. 498, pp. 266-71.10.1016/j.msea.2008.07.069 ↗
9. J. Gayda and D. Furrer: Adv. Mater. Process, 2003, vol. 7, pp. 36-39.
10. X.B. Huang, Y. Kang, H.H. Zhou, Y. Zhang, and Z.Q. Hu: Mater. Lett., 1998, vol. 36, pp. 210-13.10.1016/S0167-577X(98)00028-7 ↗
11. A. Bauer, S. Neumeier, F. Pyczakc, and M. Göken: Scripta Mater., 2010, vol. 63, pp. 1197-1200.10.1016/j.scriptamat.2010.08.036 ↗
12. Y. Yuan, Y.F. Gu, C.Y. Cui, T. Osasa, T. Tetsui, T. Yokokawa, and H. Harada: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5106-11.10.1016/j.msea.2011.03.034 ↗
13. F.E. Sczerzenie and G.E. Maurer: Superalloys 1984, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Kent, and J.F. Radavich, eds., TMS, Warrendale, PA, 1984, pp. 573–82.10.7449/1984/Superalloys_1984_573_580 ↗
14. J. Mao, K.M. Chang, W. Yang, K. Ray, S.P. Vase, and D.U. Furrer: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2441-52.10.1007/s11661-001-0034-9 ↗
15. R.L. Fleischer: Acta Metall., 1963, vol. 11, pp. 203-09.10.1016/0001-6160(63)90213-X ↗
16. E. Nembach and G. Neite: Progr. Mater. Sci., 1985, vol. 29, pp. 177-319.10.1016/0079-6425(85)90001-5 ↗
17. W. Mangen and E. Nembach: Acta Metall., 1989, vol. 37, pp. 1451-63.10.1016/0001-6160(89)90177-6 ↗
18. K. Harris, G.L. Erickson, and R.E. Schwer: Superalloys, 1984, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Knet, and J.F. Radavich, eds., TMS, Warrendale, PA, 1984, pp. 221–30.10.7449/1984/Superalloys_1984_221_230 ↗
19. J. Mao, K.M. Chang, W. Yang, D.U. Furrer, K. Ray, and S.P. Vase: Mater. Sci. Eng. A, 2002, vol. 332, pp. 318-29.10.1016/S0921-5093(01)01758-0 ↗
20. C.Y. Cui, Y.F. Gu, H. Harada, and A. Sato: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2921-27.
21. G.E. Maurer, L.A. Jackman, and J.A. Domingue: Proc. 4th Int. Symposium on Superalloys, Seven Springs, PA, ASM, Materials Park, OH, 1980, pp. 43-52.
22. G.L. Chen, L.Z. Zhuang, and J.L. Xu: Acta Metall. Sinica, 1986, vol. 22, pp. 453-60.
23. MV. Nathal, R.D. Maier, and L.J. Ebert: Metall. Trans. A, 1982, vol. 13A, pp. 1767-74.10.1007/BF02647832 ↗
24. G.B. Viswanathan, P.M. Sarosi, M.F. Henry, D.D. Whitis, W.W. Milligan, and M.J. Mills: Acta Metall., 2005, vol. 53, pp. 3041-57.
25. Y.F. Gu, C. Cui, D. Ping, H. Harada, T. Fukuda, and J. Fujioka: Mater. Sci. Eng. A, 2009, vols. 510-1, pp. 250-55.
26. J.C. Williams and E.A. Starke: Acta Mater., 2003, vol. 51, pp. 5775-99.10.1016/j.actamat.2003.08.023 ↗
27. C.Y. Cui, Y.F. Gu, Y. Yuan, T. Osada, and H. Harada: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5465-69.10.1016/j.msea.2011.03.085 ↗
28. R.N. Jarrett and J.K. Tien: Metall. Trans. A, 1982, vol. 13A, pp. 1021-32.10.1007/BF02643399 ↗
29. M.V. Nathal, R.D. Maier, and L.J. Ebert: Metall. Trans. A, 1982, vol. 13A, pp. 1767-74.10.1007/BF02647832 ↗
30. R. Merabtine, C. Bertrand, J.P. Dallas, J. Devaud-Rzepski, and M.F. Trichet: Scripta Metall. Mater., 1990, vol. 24, pp. 2203-08.10.1016/0956-716X(90)90511-E ↗
31. Q. Feng, T.K. Nandy, S. Tin, and T.M. Pollock: Acta Mater., 2003, vol. 51, pp. 269-84.10.1016/S1359-6454(02)00397-X ↗
32. S. Ma, L. Carroll, and T.M. Pollock: Acta Mater., 2007, vol. 55, pp. 5802-12.10.1016/j.actamat.2007.06.042 ↗
33. Y. Yuan, Y.F. Gu, C.Y Cui, T. Osada, T. Yokokawa and H. Harada: Adv. Eng. Mater., 2011, 13: 296-300.10.1002/adem.201000232 ↗
34. D.U. Furrer and H.J. Fecht: Scripta Mater., 1999, vol. 40, pp. 1215-20.10.1016/S1359-6462(99)00094-9 ↗
35. M. Vittori and A. Mignone: Mater. Sci. Eng., 1985, vol. 74, pp. 29-37.10.1016/0025-5416(85)90107-7 ↗
36. M.J. Donachie and S.J. Donachie: Superalloys: A Technical Guide, 2nd ed., Materials Park, OH, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
37. L. Xiao, Y. Umakoshi, and J. Sun: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2841-50.10.1007/s11661-001-1034-5 ↗
38. J.B. Vogt, S. Degallaix, and J. Foct: Int. J. Fatigue, 1984, vol. 6, pp. 211-15.10.1016/0142-1123(84)90051-3 ↗
39. M. Murayama, K. Hono, H. Hirukawa, T. Ohmura, and S. Matsuoka. Scripta Mater., 1999, 40: 467-73.10.1016/S1359-6462(99)00194-3 ↗
40. H.F. Merrick: Metall. Trans., 1974, vol. 5, pp. 891-97.10.1007/BF02643144 ↗
41. K.M. Chang and X.B. Liu: Mater. Sci. Eng. A, 2001, vol. 308, pp. 1-8.10.1016/S0921-5093(00)02042-6 ↗
42. J. Gayda and R.V. Miner: Metall. Trans. A, 1983, vol. 14A, pp. 2301-08.10.1007/BF02663305 ↗
43. A.J. Manning, David, Knowles, and C.J. Small: US Patent, No. 7208116, 2007.
44. J. Gayda, T.P. Gabb, and R.V. Miner: Low Cycle Fatigue, H.D. Solomon, G.R. Halford, L.R. Kaisand, and B.N. Leis, eds., ASTM STP, West Conshohocken, PA, 1988, pp. 293-309.10.1520/STP24488S ↗