Microstructure and Mechanical Properties of Gas-Tungsten-Arc–Welded Ti-15-3 Beta Titanium Alloy
Source abstract
Abstract
Microstructure and mechanical properties of gas-tungsten-arc (GTA)–welded Ti-15V-3Cr-3Sn-3Al alloy in direct current electrode negative mode are characterized. The thermal profile was measured during welding with continuous current (CC) and pulsed current (PC) at different frequencies. A single-step postweld aging of the welded samples at subtransus temperature was attempted to study precipitation of alpha phase. Two different morphologies of alpha phase are observed along with a partitioning of alloying elements into the two phases. Processing conditions for higher strength are identified and correlated with the thermal profile. Microstructure changes due to postweld heat treatment were characterized.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. S. Ankem and C.A. Greene: Mater. Sci. Eng. A, 1999, vol. 263, pp. 127–31.10.1016/S0921-5093(98)01170-8 ↗
2. S.M. Kazanjian and E.A. Starke, Jr.: Int. J. Fatigue,1999, vol. 21, pp. S127–S135.10.1016/S0142-1123(99)00064-X ↗
3. R.R. Boyer: in Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA,1993, pp. 335–46.
4. Titanium ’95, The Institute of Materials, London, 1996, vol. II, pp. 988–95.
5. P.J. Bania: in Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 3–14.
6. J.G. Garland: Met. Construc. Br. Weld. J., 1974, vol. 6, pp. 121–25.
7. H. Yamamoto, S. Harada, T. Ueyama, S. Ogawa, F. Matsuda, and K. Nakata: Weld. Int., 1993, vol. 7, pp. 456–61.10.1080/09507119309548425 ↗
8. G.M. Reddy, A.A. Gokhale, and K.P. Rao: J. Mater. Sci., 1997, vol. 32, pp. 4117–26.10.1023/A:1018662126268 ↗
9. A.A. Gokhale, A.A. Tzavaras, H.D. Brody, and G.M. Ecer: Proc. Conf. on Grain Refinement in Castings and Welds, G.J. Abbaschian and S.A. David, eds., TMS-AIME, Warrendale, PA, 1983, pp. 223–47.
10. T. Shinoda, Y. Ueno, and I. Masumoto: Trans. Jpn. Weld. Soc., 1990, vol. 21, pp. 18–23.
11. D.W. Becker and C.M. Adams, Jr.: Weld. J., 1979, vol. 58, pp. 143s–147s.
12. T. Mohandas and G.M. Reddy: J. Mater. Sci. Lett.,1996, vol. 15, pp. 626–28.10.1007/BF00579271 ↗
13. S. Sundaresan, G.D.J. Ram, and G.M. Reddy: Mater. Sci. Eng. A, 1999, vol. 262, pp. 88–100.10.1016/S0921-5093(98)01010-7 ↗
14. D.W. Becker and W.A. Baeslack III: Weld. Res. Suppl., 1980, pp. 85s–92s.
15. W.A. Baeslack III, P.S. Liu, and T. Paskell: Mater. Charact., 1993, vol. 30, pp. 147–54.10.1016/1044-5803(93)90018-Q ↗
16. A.W. Sommer, S. Motokura, K. Ono, and O. Buck: Acta Metall., 1973, vol. 21, pp. 489–97.10.1016/0001-6160(73)90207-1 ↗
17. G. Terlinde and G. Fischer: in Titanium and Titanium Alloys, C. Lyens and M. Peters, eds., Wiley VCH GmbH, Germany, 2003.
18. S.J. Kim, B.H. Choe, and Y.T. Lee: in Metallurgy and Technology of Practical Titanium Alloys, S. Fujishiro, D. Eylon, and T. Kishi, eds., TMS, Warrendale, PA, 1994, pp. 167–72.
19. B. Appolaire, L. Heiricher, and E. Aeby-Gautier: Acta Mater., 2005, vol. 53, pp. 3001–10.10.1016/j.actamat.2005.03.014 ↗
20. J. Da Costa Teixeira, B. Appolaire, E. Aeby-Gautier, S. Denis, F. Bruneseaux: Acta Mater., 2006, vol. 54, pp. 4261–71.10.1016/j.actamat.2006.05.019 ↗
21. P.K. Poulose and M.A. Imam: Titanium ’95, The Institute of Materials, London, 1996, vol. II, pp. 988–95.
22. T. Furuhara, T. Maki, and T. Makino: J. Mater. Process. Technol., 2001, vol. 117, pp. 318–23.10.1016/S0924-0136(01)00790-7 ↗
23. O.M. Ivasishin, P.E. Markovsky, S.L. Semiatin, and C.H. Ward: Mater. Sci. Eng. A, 2005, vol. 405, pp. 296–305.10.1016/j.msea.2005.06.027 ↗
24. N. Niwa and H. Takatori: in Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, p. 237.
25. H. Ohyama, H. Nakamori, Y. Ashida, and T. Maki: ISIJ Int., 1992, vol. 32, pp. 222–31.10.2355/isijinternational.32.222 ↗
26. J. Ma and Q. Wang: Mater. Sci. Eng. A, 1998, vol. 243, pp. 150–54.10.1016/S0921-5093(97)00793-4 ↗
27. Materials Properties Handbook: Titanium Alloys, R. Boyer, G. Welsch, and E.W. Colings, eds., ASM INTERNATIONAL, Materials Park, OH, 1994, p. 901.
28. H. Ohyama and Y. Ashida: ISIJ Int., 1991, vol. 31, pp. 799–806.10.2355/isijinternational.31.799 ↗
29. E.S.K. Menon, and H.I. Aaronson: Acta Metall., 1987, vol. 35, pp. 549–63.10.1016/0001-6160(87)90179-9 ↗