journal article·2015-06

Mechanism of Mechanically Induced Nanocrystallization of Amorphous FINEMET Ribbons During Milling

T. Gheiratmand, H. R. Madaah Hosseini, P. Davami, G. Ababei, M. Song

Publisher page

Abstract

Melt-spun FINEMET amorphous ribbons were milled for different periods up to 65 minutes. The effect of milling time on the structure has been investigated using X-ray diffraction, differential scanning calorimetry, scanning electron microscopy, and transmission electron microscopy. The results showed that partial crystallization of the amorphous powder occurs during milling. Transmission electron microscope observations confirmed that an α-Fe(Si) phase with a mean crystallite size of ~9 nm nucleates inhomogenously on the plastically deformed regions. Differential scanning calorimetry analysis indicated that under high-energy vibrational milling, the Fe23B6 phase becomes unstable, and Fe2B and Fe3B phases could form instead in the amorphous matrix. Gibbs free energy calculations explained the increase of crystalline phases’ nucleation rates under the high pressures resulting from the mechanical milling impacts.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Material Dynamics and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. T. Gheiratmand, H.R. Madaah Hosseini, P. Davami, F. Ostadhossein, M. Song, and M. Gjoka: Nanoscale, 2013, vol. 5, pp. 7520–27.10.1039/c3nr01213a ↗
2. S. Alleg, S. Kartout, M. Ibrir, S. Azzaza, N.E. Fenineche, and J.J. Suñol: J. Phys. Chem. Solids, 2013, vol. 74, pp. 550–57.10.1016/j.jpcs.2012.12.002 ↗
3. C. Smith, S. Katakam, S. Nag, Y.R. Zhang, J.Y. Law, R. Ramanujan, N. Dahotre, and R. Banerjee: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2998–3009.10.1007/s11661-014-2239-8 ↗
4. L.L. Meng, X.Y. Li, J. Pang, L. Wang, B. An, L.J. Yin, K.K. Song, and W.M. Wang: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5122–33.10.1007/s11661-013-1868-7 ↗
5. D. L. Zhang: Prog. Mater Sci., 2004, vol. 49, pp. 537–60.10.1016/S0079-6425(03)00034-3 ↗
6. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
7. B. Movahedi, M.H. Enayati, and C.C. Wong: Mater. Sci. Eng. B, 2010, vol. 172, pp. 50–4.10.1016/j.mseb.2010.04.016 ↗
8. Y.J. Liu, I.T. H. Chang, and P. Bowen: Mater. Sci. Eng. A, 2001, vol. 304–306, pp. 389–93.10.1016/S0921-5093(00)01427-1 ↗
9. S. Azzaza, S. Alleg, and J. Suñol: Adv. Mater. Phys. Chem., 2013, vol. 3, pp. 90–100.10.4236/ampc.2013.31A011 ↗
10. V.A. Peña Rodríguez, J. Quispe Marcatoma, J.M. Agüero Andrade, E.M. Baggio-Saitovitch, A. Caytueros Villegas, and E.C. Passamani: Mater. Sci. Eng. A, 2006, vol. 429, pp. 261–65.10.1016/j.msea.2006.05.067 ↗
11. J.J. Ipus, J.S. Blázquez, V. Franco, and A. Conde: Intermetallics, 2008, vol. 16, pp. 1073–82.10.1016/j.intermet.2008.06.006 ↗
12. L.B. Hong, C. Bansal, and B. Fultz: Nanostruct. Mater., 1994, vol. 4, pp. 949–56.10.1016/0965-9773(94)90101-5 ↗
13. J.H. Kim and C.H. Park: J. Alloys Compd., 2014, vol. 585, pp. 69–74.10.1016/j.jallcom.2013.09.085 ↗
14. D.R. Maurice and T.H. Courtney: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 289–303.10.1007/BF02782409 ↗
15. F.Q. Guo and K. Lu: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1123–31.10.1007/s11661-997-0278-0 ↗
16. J.Y. Yang, J.S. Wu, T.J. Zhang, and K. Cui: J. Alloys Compd., 1998, vol. 265, pp. 269–72.10.1016/S0925-8388(97)00308-3 ↗
17. M.E. McHenry, M.A. Willard, and D.E. Laughlin: Prog. Mater. Sci., 1999, vol. 44, pp. 291–433.10.1016/S0079-6425(99)00002-X ↗
18. J.S. Blázquez, S. Lozano-Pérez, and A. Conde: Mater. Lett., 2000, vol. 45, pp. 246–50.10.1016/S0167-577X(00)00113-0 ↗
19. T. Miki, K. Tsujita, S. Ban-Ya, and M. Hino: CALPHAD, 2006, vol. 30, pp. 449–54.10.1016/j.calphad.2006.07.001 ↗
20. M. Imafuku, S. Sato, H. Koshiba, E. Matsubara, and A. Inoue: Scripta Mater., 2001, vol. 44, pp. 2369–72.10.1016/S1359-6462(01)00776-X ↗
21. J. Fornell, S. González, E. Rossinyol, S. Suriñach, M.D. Baró, D.V. Louzguine-Luzgin, J.H. Perepezko, J. Sort, and A. Inoue: Acta Mater., 2010, vol. 58, pp. 6256–66.10.1016/j.actamat.2010.07.047 ↗
22. Y.R. Zhang and R.V. Ramanujan: J. Alloys Compd., 2005, vol. 403, pp. 197–205.10.1016/j.jallcom.2005.05.019 ↗
23. P. Henits, Á. Révész, L.K. Varga, and Z. Kovács: Intermetallics, 2011, vol. 19, pp. 267–75.10.1016/j.intermet.2010.10.007 ↗
24. Y.X. Zhuang, J.Z. Jiang, T.J. Zhou, H. Rasmussen, L. Gerward, M. Mezouar, W. Crichton, and A. Inoue: Appl. Phys. Lett., 2000, vol. 77, pp. 4133–35.10.1063/1.1332409 ↗
25. F. Ye and K. Lu: Acta Mater., 1998, vol. 46, pp. 5965–71.10.1016/S1359-6454(98)00240-7 ↗
26. X.Y. Zhang, F.X. Zhang, J.W. Zhang, W.Yu, M. Zhang, J.H. Zhao, R.P. Liu, Y.F. Xu, and W.K. Wang: J. Appl. Phys., 1998, vol. 84, pp. 1918–23.10.1063/1.368319 ↗
27. Y.Y. Sun, M. Song, X.Z. Liao, and Y.H. He: J. Alloys Compd., 2011, vol. 509, pp. 6603–08.10.1016/j.jallcom.2011.03.103 ↗
28. Y.Y. Sun, M. Song, X.Z. Liao, G. Sha, and Y.H. He: Mater. Sci. Eng. A, 2012, vol. 543, pp. 145–51.10.1016/j.msea.2012.02.062 ↗
29. D. Basset, P. Matteazzi, and F. Miani: Mater. Sci. Eng. A, 1994, vol. 174, pp. 71–74.10.1016/0921-5093(94)91113-4 ↗
30. D. Basset, P. Matteazzi, and F. Miani: Mater. Sci. Eng. A, 1993, vol. 168, pp. 149–52.10.1016/0921-5093(93)90718-T ↗
31. R.M. Davis, B. McDermott, and C.C. Koch: Metall. Mater. Trans. A, 1988, vol. 19A, pp. 2867–74.10.1007/BF02647712 ↗
32. D. Maurice and T.H. Courtney: Metall. Mater. Trans. A, 1994, vol. 25, pp. 147–58.10.1007/BF02646683 ↗
33. X.J. Gu, S.J. Poon, G.J. Shiflet, and M. Widom: Acta Mater., 2008, vol. 56, pp. 88–94.10.1016/j.actamat.2007.09.011 ↗
34. S.W. Lee, M.Y. Huh, S.W. Chae, and J.C. Lee: Scripta Mater., 2006, vol. 54, pp. 1439–44.10.1016/j.scriptamat.2006.01.002 ↗
35. M. Palumbo, C. Papandrea, and L. Battezzati: J. Mater. Sci., 2005, vol. 40, pp. 2431–35.10.1007/s10853-005-1970-3 ↗
36. K. Lu: Phys. Rev. B, 1995, vol. 51, pp. 18–27.10.1103/PhysRevB.51.18 ↗
37. D. Turnbull: J. Appl. Phys., 1950, vol. 21, pp. 1022–28.10.1063/1.1699435 ↗
38. H.A. Shivaee and H.R. M. Hosseini: Thermochim. Acta, 2009, vol. 494, pp. 80–5.10.1016/j.tca.2009.04.020 ↗
39. F. Spaepen: Acta Metall., 1977, vol. 25, pp. 407–15.10.1016/0001-6160(77)90232-2 ↗
40. L. Yao: Phd Thesis, In Institut für Angewandte Materialforschung F-I1, Berlin, 2011.
41. A.H. Taghvaei, M. Stoica, K.G. Prashanth, and J. Eckert: Acta Mater., 2013, vol. 61, pp. 6609–21.10.1016/j.actamat.2013.07.045 ↗
42. H. Chen, Y. He, G.J. Shiflet, and S.J. Poon: Nature, 1994, vol. 367, pp. 541–43.10.1038/367541a0 ↗
43. R.E. Reed-Hill and R. Abbaschian: Physical Metallurgy Principles, 3rd ed., PWS, Boston, 1994, pp. 495–501.