High-Temperature Mechanical Integrity of Cu-Sn SLID Wafer-Level Bonds
Source abstract
Abstract
Wafer-level Cu-Sn SLID (Solid–Liquid Interdiffusion)-bonded devices have been evaluated at high temperature. The bonding process was performed at 553 K (280 °C) and the mechanical integrity of the bonded samples was investigated at elevated temperatures. The die shear strength of Cu-Sn systems shows a constant behavior (42 MPa) for shear tests performed from room temperature [RT—298 K (25 °C)] to 573 K ( to 300 °C). This confirms experimentally the high-temperature stability of Cu-Sn SLID bonding predicted from phase diagrams. The fractography of sheared samples indicates brittle-fracture mode for all samples shear tested from RT to 573 K (300 °C). The two dominating failure modes are Adhesive fracture between the Ti-W adhesion layer and the Si, and interface fracture at the original bond interface. This indicates that the bonding material itself is stronger than the observed shear strength values, and since these interfaces can be improved with process optimization even stronger bonds can be achieved. The presented work offers fundamental evidence of the Cu-Sn SLID bonding process for operating microelectronics and MEMS at high temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. S. Giudice and C. Bosshard: Microelectronics Packaging Conference (EMPC), 2013 European, 2013, pp. 1–5.
2. N. Hoivik and K. Aasmundtveit: Handbook of Wafer Bonding, 1st ed., Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2012, pp. 181–214.10.1002/9783527644223.ch10 ↗
3. J.F. Li, P.A. Agyakwa, and C.M. Johnson: Acta Materialia, 2010, vol. 58, pp. 3429–43.10.1016/j.actamat.2010.02.018 ↗
4. T. Tollefsen, A. Larsson, O. Løvvik, and K. Aasmundtveit: Metall. Mater. Trans. B,, 2012, vol. 43B, pp. 397–405.10.1007/s11663-011-9609-z ↗
5. C. Yu-San, H. Yan-Pin, T. Ruoh-Ning, S. Ming-Shaw, L. Teu-Hua, C. Kou-Hua, C. Chi-Tsung, C. Ching-Te, H. Wei, C. Jin-Chern, T. Ho-Ming, and C. Kuan-Neng: IEEE Trans. Electron. Devices, 2014, vol. 61, pp. 1131–36.10.1109/TED.2014.2304778 ↗
6. P.L. Dreike, D.M. Fleetwood, D.B. King, D.C. Sprauer, and T.E. Zipperian: IEEE Trans. Compon. Packag. Manuf. Technol. Part A, 1994, vol. 17, pp. 594–609.10.1109/95.335047 ↗
7. C. Gallagher, B. Shearer, and G. Matijasevic: High-Temperature Electronic Materials, Devices and Sensors Conference,, 1998, pp. 180–89.
8. R.W. Johnson, J.L. Evans, P. Jacobsen, J.R. Thompson, and M. Christopher: IEEE Trans. Electron. Packag. Manuf., 2004, vol. 27, pp. 164–76.10.1109/TEPM.2004.843109 ↗
9. G. Zonfrillo, I. Giovannetti, and M. Manetti: Meccanica, 2008, vol. 43, pp. 125–31.10.1007/s11012-008-9126-6 ↗
10. A. Lapadatu, T.I. Simonsen, G. Kittilsland, B. Stark, N. Hoivik, V. Dalsrud, and G. Salomonsen: ECS Trans., 2010, vol. 33, pp. 73–82.10.1149/1.3483495 ↗
11. H. Xu, M. Broas, H. Dong, V. Vuorinen, T. Suni, S. Vahanen, P. Monnoyer, and M. Paulasto-Krockel: Microelectronics Packaging Conference (EMPC), 2013 European, 2013, pp. 1–6.
12. N.P. Pham, P. Limaye, P. Czarnecki, V.P. Olalla, V. Cherman, D.S. Tezcan, and H.A.C. Tilmans: Proceedings of the Electronics Packaging Technology Conference (EPTC), 2010 12th, 2010, pp. 1–6.10.1109/EPTC.2010.5702595 ↗
13. Y. Lv, M. Chen, M. Cai, and S. Liu: Semicond. Sci. Technol., 2014, vol. 29, p. 025003.10.1088/0268-1242/29/2/025003 ↗
14. F. Lang, H. Yamaguchi, H. Nakagawa, and H. Sato: J. Electrochem. Soc., 2013, vol. 160, pp. D315–19.10.1149/2.114308jes ↗
15. A. Campos-Zatarain, D. Flynn, K. Aasmundtveit, N. Hoivik, K. Wang, H. Liu, T.-T. Luu, M. Mirgkizoudi, and R. W. Kay: Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS, 2014, pp. 175–79.
16. J.D. Reed, M. Lueck, C. Gregory, A. Huffman, J.M. Lannon, and D. Temple: Proceedings 60th Electronic Components and Technology Conference (ECTC), 2010, pp. 846–52.10.1109/ECTC.2010.5490704 ↗
17. R. Labie, P. Limaye, K.W. Lee, C.J. Berry, E. Beyne, and I. De Wolf: Proceedings of the Electronic System-Integration Technology Conference (ESTC), 2010 3rd, 2010, pp. 1–5.10.1109/ESTC.2010.5642925 ↗
18. C. Yao-Jen, K. Cheng-Ta, and C. Kuan-Neng: Electron. Device Lett. IEEE, 2013, vol. 34, pp. 102–04.10.1109/LED.2012.2225136 ↗
19. A. Duan, K. Wang, K.E. Aasmundtveit, and N. Hoivik: Electronic System-Integration Technology Conference (ESTC), 2012 4th, 2012, pp. 1–5.10.1109/ESTC.2012.6542152 ↗
20. H. Xu, T. Suni, V. Vuorinen, J. Li, H. Heikkinen, P. Monnoyer, and M. Paulasto-Kröckel: Adv. Manuf., 2013, vol. 1, pp. 226–35.10.1007/s40436-013-0035-0 ↗
21. T.T. Luu, A. Duan, K.E. Aasmundtveit, and N. Hoivik: J. Electron. Mater.,2013, vol. 42, pp. 3582–92.10.1007/s11664-013-2711-z ↗
22. T.A. Tollefsen, A. Larsson, O.M. Lovvik, and K.E. Aasmundtveit: IEEE Trans. Compon., Packag. Manuf. Technol., 2013, vol. 3, pp. 904–14.10.1109/TCPMT.2013.2253353 ↗
23. F. McCluskey, M. Dash, Z. Wang, and D. Huff: Microelectron. Reliab., 2006, vol. 46, pp. 1910–14.10.1016/j.microrel.2006.07.090 ↗
24. G. Zeng, S. McDonald, and K. Nogita: Microelectron. Reliab., 2012, vol. 52, pp. 1306–22.10.1016/j.microrel.2012.02.018 ↗
25. A. Geranmayeh, R. Mahmudi, and M. Kangooie: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3967–72.10.1016/j.msea.2011.02.034 ↗
26. R. Mahmudi and S. Alibabaie: Mater. Sci. Eng. A, 2013, vol. 559, pp. 421–26.10.1016/j.msea.2012.08.121 ↗
27. K.E. Aasmundtveit, L. Thi-Thuy, A.S.B. Vardoy, T.A. Tollefsen, W. Kaiying, and N. Hoivik: Electron. Sys. Integr. Technol. Conf. (ESTC), 2014, 2014, pp. 1–6.10.1109/ESTC.2014.6962772 ↗
28. L. Xu and J. H. Pang: Thin Solid Films,2006, vol. 504, pp. 362–66.10.1016/j.tsf.2005.09.056 ↗
29. H. Xu, M. Broas, H. Dong, V. Vuorinen, T. Suni, S. Vahanen, P. Monnoyer, and M. Paulasto-Krockel: Microelectronics Packaging Conference (EMPC), 2013 European, 2013, pp. 1–6.