journal article·2015-09

Electrochemical and Mechanical Behavior of Lead-Silver and Lead-Bismuth Casting Alloys for Lead-Acid Battery Components

Wislei R. Osório, Leandro C. Peixoto, Amauri Garcia

Publisher page

Abstract

The present study focuses on the interrelation of microstructure, mechanical properties, and corrosion resistance of Pb-Ag and Pb-Bi casting alloys, which can be used in the manufacture of lead-acid battery components, as potential alternatives to alloys currently used. A water-cooled solidification system is used, in which vertical upward directional solidification is promoted permitting a wide range of microstructures to be investigated. Correlations between microstructural arrays, tensile strengths, and corrosion resistances of Pb-1 wt pct Ag, Pb-2.5 wt pct Ag, Pb-1 wt pct Bi, and Pb-2.5 wt pct Bi alloys are envisaged. It is shown that a compromise between corrosion resistance (represented by the corrosion current density) and mechanical properties (represented by the ultimate tensile strength) can be obtained. Comparisons between specific strengths and mechanical/corrosion ratios are also made. It is also shown that, for microstructures solidified under cooling rates higher than 10 K/s, the Pb-Ag alloys exhibit higher specific strength and mechanical/corrosion ratio. In contrast, for casting processes in which the cooling rates are lower than 5 K/s, the dilute Pb-Bi alloy (i.e., 1 wt pct Bi) is shown to have more appropriate requirements for lead-acid battery components. Comparisons between specific strengths, mechanical/corrosion ratio, and relative weight and cost with Pb-Sn and Pb-Sb alloys are also made.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Aluminum Alloy Microstructure Properties · Thermodynamic and Structural Properties of Metals and Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. El-Sayed A, HIbrahim EMM, Abdel-Rahman ES, Mohran HS, Ismael M, Shilkamy HA (2015) Metall Mater Trans A 46A:1995-200610.1007/s11661-015-2827-2 ↗
2. R.D. Prengaman: J. Power Sources, 2001, vol. 95, pp. 224-33.10.1016/S0378-7753(00)00620-0 ↗
3. R.D. Prengaman: J. Power Sources, 2006, vol. 158, pp. 1110-16.10.1016/j.jpowsour.2006.02.079 ↗
4. B. Rezaei, and S. Damiri: J. Solid State Electrochem. 2005, vol. 9, pp. 590-94.10.1007/s10008-004-0628-4 ↗
5. L.C. Peixoto, W.R. Osório and A. Garcia: J. Power Sources, 2009, vol. 192, pp. 724-29.10.1016/j.jpowsour.2009.02.081 ↗
6. L.C. Peixoto, W.R. Osório and A. Garcia: J. Power Sources, 2010, vol. 195, pp. 621-30.10.1016/j.jpowsour.2009.08.011 ↗
7. M.J. Koop, D.F.A. Koch, and D.A. Rand: J. Power Sources, 1991, vol. 34, pp. 369-80.10.1016/0378-7753(91)80102-4 ↗
8. M.J. Koop, D.A. Rand, B. Culpin: J. Power Sources, 1993, vol. 45, pp. 365–77.10.1016/0378-7753(93)80025-K ↗
9. W.R. Osório, A.D. Bortolozo, L.C. Peixoto, and A. Garcia: J. Power Sources, 2014, vol. 271 pp. 124–33.10.1016/j.jpowsour.2014.07.166 ↗
10. A. de Guibert, B. Chaumont, L. Albert, J.L. Caillerie, A. Ueber-schaer, R. Hohn, W. Davis, and M.J. Weighall: J. Power Sources, 1993, vol. 42, pp. 11-24.10.1016/0378-7753(93)80133-A ↗
11. L.T. Lam, T.D. Huynh, N.P. Haigh, J.D. Douglas, D.A.J. Rand, C.S. Lakshmi, P.A. Hollingsworth, J.B. See, J.E. Manders, and D.M. Rice: J. Power Sources, 1995, vol. 53, pp. 63–74.10.1016/0378-7753(94)02159-Z ↗
12. L.T. Lam, O.V. Lim, N.P. Haigh, D.A.J. Rand, J.E. Manders, and D.M. Rice: J. Power Sources, 1998, vol. 73, pp. 36–46.10.1016/S0378-7753(98)00020-2 ↗
13. [13] P.C. Frost: J. Power Sources, 1999, vol. 78, pp. 256–66.10.1016/S0378-7753(99)00042-7 ↗
14. W.R. Osório, L.C. Peixoto, and A. Garcia: Int. J. Electrochem. Sci., 2011, vol. 6, pp. 1522-36.10.1016/S1452-3981(23)15090-5 ↗
15. W.R. Osório, L.C. Peixoto, and A. Garcia: J. Power Sources, 2013, vol. 238, pp. 324–35.10.1016/j.jpowsour.2013.03.099 ↗
16. A.B. Craig, D. Noah: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2304-08.
17. N. Haghdadi, A.B. Phillion, D.M. Maijer: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2073-81.10.1007/s11661-015-2780-0 ↗
18. C. Lee: Met. Mater. Int., 2014 vol. 20(6), pp. 1027-135.10.1007/s12540-014-6005-7 ↗
19. D.M. Rosa, J.E. Spinelli, W.R. Osório, and A. Garcia: J. Power Sources, 2006, vol. 162, pp. 696-705.10.1016/j.jpowsour.2006.07.016 ↗
20. E.M. Sakr, M.R. Nagy, and A.S. Mahmooud: Egypt. J. Solids, 2006, vol. 29, pp. 81-99.10.21608/ejs.2006.149142 ↗
21. Bard AJ, Parsons R, Jordan J (1985) Standard Potentials in Aqueous Solutions. Marcel Dekker, New York, p. 129.
22. P. Vanýsek, 2012/2013, p. “Electrochemical Series”. Electrochemical Series. In: Haynes, W. M. Handbook of Chemistry and Physics: 93rd Edition. Chemical Rubber Company. p. 5-80. ISBN 9781439880494.