Modeling of kinetics of austenite-to-allotriomorphic ferrite transformation in 0.37C-1.45Mn-0.11V microalloyed steel
Source abstract
Abstract
The present article is concerned with the theoretical and experimental study of the growth kinetics of allotriomorphic ferrite in medium carbon vanadium-titanium microalloyed steel. A theoretical model is presented in this work to calculate the evolution of austenite-to-allotriomorphic ferrite transformation with time at a very wide temperature range. At temperatures above eutectoid temperature, where allotriomorphic ferrite is the only austenite transformation product, the soft-impingement effect should be taken into account in the modeling. In that case, the Gilmour et al. analysis reliably predicts the progress of austenite-to-allotriomorphic ferrite transformation in this steel. By contrast, since pearlite acts as a carbon sink, the carbon enrichment of austenite due to the previous ferrite formation is avoided, and carbon concentration in austenite far from the α/γ interface remains the same as the overall carbon content of the steel. Hence, the soft-impingement effect should be neglected, and allotriomorphic ferrite is considered to grow under a parabolic law. Therefore, assumption of a semi-infinite extent austenite with constant boundary conditions is suitable for the kinetics of the isothermal decomposition of austenite. An excellent agreement (higher than 93 pct in R 2) has been obtained between the experimental and predicted values of the volume fraction of ferrite in all of the ranges of temperature studied.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. H.I. Aaronson: Symp. on the Mechanism of Phase Transformations in Metals, Institute of Metals, London, 1955, p. 47.
2. C.A. Dube, H.I. Aaronson, and R.F. Mehl: Rev. Metall., 1958, vol. 3, pp. 201–10.10.1051/metal/195855030201 ↗
3. J.W. Christian: Theory of Phase Transformation and Alloys, 2nd ed., Pergamon Press, Oxford, United Kingdom, 1975, Part 1, p. 10.
4. H.K.D.H. Bhadeshia: in Mathematical Modelling of Weld Phenomena III, H. Cerjak and H.K.D.H. Bhadeshia, eds., Institute of Materials, London, 1996, pp. 1–50.
5. H.K.D.H. Bhadeshia, L.-E. Svensson, and B. Gretoft: Proc. Conf. on Welding Metallurgy of Structural Steels, J.Y. Koo, ed., TMS-AIME, Warrendale, PA, 1987, pp. 517–30.
6. G.P. Krielaart, M. Onik, C.M. Brakman, F.D. Tichelaar, E.J. Mittemeijer, and S. van der Zwaag: Z. Metallkd., 1994, vol. 84, pp. 756–65.
7. M. Unemoto, A. Hiramatsu, A. Moriya, T. Watanabe, S. Nanaba, N. Nakajima, G. Anan, and Y. Higo: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 306–15.10.2355/isijinternational.32.306 ↗
8. J.W. Cahn: Acta Metall., 1956, vol. 4, pp. 449–59.10.1016/0001-6160(56)90041-4 ↗
9. M. Hillert and L.I. Staffanson: Acta Chem. Scand., 1970, vol. 24, pp. 3618–26.10.3891/acta.chem.scand.24-3618 ↗
10. K.L. Lee, J.K. Lee, K.B. Kang, and O. Kwon: Iron Steel Inst. Jpn. Int., 1992, vol. 32, pp. 326–34.10.2355/isijinternational.32.326 ↗
11. I. Madariaga, I. Gutierrez, C. Garcia de Andres, and C. Capdevila: Scripta Metall. Mater., 1999, vol. 41, pp. 229–35.10.1016/S1359-6462(99)00149-9 ↗
12. I. Madariaga and I. Gutierrez: Acta Mater., 1999, vol. 47, pp. 951–60.10.1016/S1359-6454(98)00388-7 ↗
13. I. Madariaga, I. Gutiérrez, and J.L. Romero: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1003–15.10.1007/s11661-998-0292-x ↗
14. M.A. Linaza, J.L. Romero, J.M. Rodriguez-Ibabe, and J.J. Urcola: Scripta Metall., 1993, vol. 29, p. 1217.10.1016/0956-716X(93)90112-6 ↗
15. I. Madariaga and I. Gutiérrez: Scripta Metall. Mater., 1997, vol. 37, pp. 1185–92.10.1016/S1359-6462(97)00229-7 ↗
16. C. García De Andrés, C. Capdevila, and F.G. Gaballero: Proc. Congreso Nacional de Tratamientos Térmicos y de Superficie TRATERMAT 98, M. Carsi, F. Peñlba, O.A. Ruano and B.J. Fernández, CENIMCSIC, Madrid, 1998, p. 135.
17. H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1985, vol. 1, p. 497.10.1179/mst.1985.1.7.497 ↗
18. S.S. Babu, H.K.D.H. Bhadeshia, and L.-E. Svensson: J. Mater. Sci. Lett., 1991, vol. 10, p. 142.10.1007/BF02352829 ↗
19. S.S. Babu and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1990, vol. 6, p. 1005.10.1179/026708390790189605 ↗
20. C. García de Andrés, C. Capdevila, and F.G. Caballero, and H.K.D.H. Bhadeshia: Scripta Mater., 1998, vol. 39, pp. 853–59.10.1016/S1359-6462(98)00271-1 ↗
21. C. García de Andrés, G. Caruana, and L.F. Alvarez: Mater. Sci. Eng., 1998, vol. A241, p. 211.10.1016/S0921-5093(97)00491-7 ↗
22. J. Bardford and W.S. Owen: J. Iron Steel Inst., 1961, vol. 197, p. 146.
23. A.K. Sinha: Ferrous Physical Metallurgy, Butterworths, Boston, MA, 1989, p. 379.
24. K.C. Russell: Acta Metall., 1968, vol. 16, p. 761.10.1016/0001-6160(68)90148-X ↗
25. H.K.D.H. Bhadeshia: Met. Sci., 1982, vol. 16, p. 159.10.1179/030634582790427217 ↗
26. G.F. Vander Voort: Metallography. Principles and Practice, McGraw-Hill, New York, NY, 1984, p. 27.10.31399/asm.tb.mpp.9781627082600 ↗
27. C. García, L.F. Alvarez, and M. Carsí: Weld. Int., 1982, vol. 6, p. 612.10.1080/09507119209548251 ↗
28. W.F. Lange, M. Enomoto, and H.I. Aaronson: Metall. Trans. A, 1988, vol. 19A, pp. 427–40.10.1007/BF02649256 ↗
29. R.H. Siller and R.B. McLellan: Metall. Trans. A, 1970, vol. 1, pp. 985–88.10.1007/BF02811782 ↗
30. H.K.D.H. Bhadeshia: Met. Sci., 1981, vol. 15, p. 477.10.1016/0036-9748(81)90287-8 ↗
31. S.M. Hodson: MTDATA—Metallurgical and Thermomechanical Data-bank, National Physical Laboratory, Teddington, United Kingdom, 1989, p. 1.
32. H.K.D.H. Bhadeshia: Materials Algorithms Project (MAP), URL: www.msm.cam.ac.uk/map/steel/subs/ferr-b.html.
33. N. Ridley, H. Stuart, and L. Zwell: Trans. AIME, 1969, vol. 245, p. 1834.
34. D.J. Dyson and B. Holmes: J. Iron Steel Inst., 1970, vol. 208, p. 469.
35. N.A. Gjostein, H.A. Domian, H.I. Aaronson, and E. Eichen: Acta Metall., 1966, vol. 14, p. 1637.10.1016/0001-6160(66)90016-2 ↗
36. R.W.K. Honeycombe and H.K.D.H. Bhadeshia: Steels: Microstructure and Properties, Edward Arnold, London, 1995, p. 5.
37. C. Atkinson, H.B. Aaron, K.R. Kinsman, and H.I. Aaronson: Metall. Trans. A, 1973, vol. 4, pp. 783–92.10.1007/BF02643088 ↗
38. C. Zener: J. Appl. Phys., 1949, vol. 20, p. 950.10.1063/1.1698258 ↗
39. J.W. Christian: Theory of Transformations in Metals and Alloys, 2nd ed., Pergamon, Oxford, United Kingdom, 1975, Part I, p. 482.
40. H.K.D.H. Bhadeshia: Progr. Mater. Sci., 1985, vol. 29, p. 321.10.1016/0079-6425(85)90004-0 ↗
41. G.J. Shiflet, J.R. Bradley, and H.I. Aaronson: Metall. Trans. A, 1978, vol. 9A, pp. 999–1008.10.1007/BF02649845 ↗
42. J.B. Gilmour, G.R. Purdy, and J.S. Kirkaldy: Metall. Trans. A, 1972, vol. 3, pp. 3213–22.10.1007/BF02661336 ↗
43. C. Capdevila, C. Garcia de Andres, and H.K.D.H. Bhadeshia: Materials Algorithms Project (MAP), URL: www.msm.cam.ac.uk/map/steel/programs/ferr-b.html.
44. R.C. Reed and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1992, vol. 8, p. 421.10.1179/mst.1992.8.5.421 ↗