Enhanced Mechanical Properties in a Low-Carbon Ultrafine Grain Steel by Niobium Addition
Source abstract
Abstract
The microstructure and mechanical behavior of low-carbon ultrafine grain steel (UFG; 0.165 wt pct carbon) after niobium (Nb) addition were investigated. It was found that the addition of 0.028 wt pct of Nb resulted in the optimal tensile strength of 990.8 MPa with an adequate elongation of 15.5 pct. In comparison to the normal UFG steel (without Nb), the strength of Nb-UFG steel was substantially enhanced without any sacrifice of its elongation. The main increased strengthening mechanisms of Nb-UFG steel were precipitation and dislocation strengthening. The improved work hardening and adequate elongation of Nb-UFG steel could be ascribed to geometrically necessary dislocations and heterogeneous ferrite grains. Discontinuous static recrystallization occurred by a small rolling reduction on hardened martensite laths, resulting in the formation of heterogeneous ferrite grains. Ultrafine ferrite grains were surrounded by high-angle grain boundaries, and nanoscale Nb(C, N) carbonitrides providing precipitation strengthening were precipitated mainly in the α-phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. R. Zhang, W.Q. Cao, Z.J. Peng, J. Shi, H. Dong, and C.H. Huang: Mater. Sci. Eng. A., 2013, vol. 583, pp. 84–8.10.1016/j.msea.2013.06.067 ↗
2. K. Lu: Science., 2014, vol. 345, pp. 1455–6.10.1126/science.1255940 ↗
3. B.F. Wang, J.Y. Sun, J.D. Zou, S. Vincent, and J. Li: J. Cent South Univ., 2015, vol. 22, pp. 3698–3074.10.1007/s11771-015-2912-0 ↗
4. N. Tsuji, R. Ueji, Y. Minamino, and Y. Saito: Scripta Mater., 2002, vol. 46, pp. 305–10.10.1016/S1359-6462(01)01243-X ↗
5. R. Ueji, N. Tsuji, Y. Minamino, and Y. Koizumi: Acta Mater., 2002, vol. 50, pp. 4177–89.10.1016/S1359-6454(02)00260-4 ↗
6. K. Matsybara, Y. Miyahara, Z. Horita, and T.G. Langdon: Acta Mater., 2003, vol. 51, pp. 3073–84.10.1016/S1359-6454(03)00118-6 ↗
7. D.H. Shin, B.C. Kim, K. Park, and Y.S. Kim: Acta Mater., 2000, vol. 48, pp. 2247–55.10.1016/S1359-6454(00)00028-8 ↗
8. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47, pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
9. A. Belyakov, Y. Sakika, T. Hara, Y. Kimura, and K. Tsuzaki: Metall. Mater. Trans. A., 2003, vol. 34A, pp. 131–8.10.1007/s11661-003-0214-x ↗
10. A.G. Kalashami, A. Kermanpur, E. Ghassemali, A. Najafizadeh, and Y. Mazaheri: Mater. Sci. Eng. A., 2016, vol. 678, pp. 215–26.10.1016/j.msea.2016.09.108 ↗
11. M. Hamzeh, A. Kermanpur, and A. Najafizadeh: Mater. Sci. Eng. A., 2014, vol. 593, pp. 24–30.10.1016/j.msea.2013.09.026 ↗
12. H.T. Wang, N.R. Tao, and K. Lu: Acta Mater., 2012, vol. 60, pp. 4027–40.10.1016/j.actamat.2012.03.035 ↗
13. L.J. Zhao, N. Park, Y.Z. Tian, S. Chen, A. Shibata, and N. Tsuji: Mater. Res. Lett., 2016, vol. 5, pp. 61–8.10.1080/21663831.2016.1208301 ↗
14. Y.Q. Ma, J.E. Jin, and Y.K. Lee: Scripta Mater., 2015, vol. 52, pp. 1311–5.10.1016/j.scriptamat.2005.02.018 ↗
15. R. Ueji, N. Tsuji, Y. Minamino, and Y. Koizumi: Sci. Technol. Adv. Mater., 2004, vol. 5, pp. 153–62.10.1016/j.stam.2003.10.017 ↗
16. X. Li, T.F. Jing, M.M. Lu, and J. Zhang: J. Mater. Eng. Perform., 2012, vol. 21, pp. 1496–9.10.1007/s11665-011-0055-5 ↗
17. K. Hamad and Y.G. Ko: Mater. Trans. A., 2016, vol. 47, pp. 2319–34.10.1007/s11661-016-3405-y ↗
18. Y.M. Wang, M.W. Chen, F.H. Zhou, and E. Ma: Nature., 2002, vol. 419, pp. 912–5.10.1038/nature01133 ↗
19. T.H. Fang, W.L. Li, N.R. Tao, and K. Lu: Science., 2011, vol. 331, pp. 1587–90.10.1126/science.1200177 ↗
20. S.K. Panigrahi and R. Jayanganthan: Metall. Mater. Trans. A., 2010, vol. 40A, pp. 2675–90.10.1007/s11661-010-0328-x ↗
21. T. Shanmugasundaram, B.S. Murty, and V.S. Sarma: Scripta Mater., 2006, vol. 54, pp. 2013–7.10.1016/j.scriptamat.2006.03.012 ↗
22. Q. Yuan, G. Xu, S. Liu, M. Liu, H.J. Hu, and G.Q. Li: Metals., 2018, vol. 8, pp. 518–31.10.3390/met8070518 ↗
23. Q. Yuan, G. Xu, M. Liu, M. Liu, and H.J. Hu: Trans. Indian Inst. Met., 2019, vol. 72, pp. 741–9.10.1007/s12666-018-1526-2 ↗
24. Q. Yuan, G. Xu, M. Liu, H.J. Hu, and J.J. Tian: Steel Res. Int., 2019, vol. 2, p. 1800318. https://doi.org/10.1002/srin.201800318.10.1002/srin.201800318 ↗
25. H.A. Alizamini, M. Militzer, and W.J. Poole: Scripta Mater., 2007, vol. 57, pp. 1065–8.10.1016/j.scriptamat.2007.08.035 ↗
26. S.M. Hosseini, M. Alishahi, A. Najafizadeh, and A. Kermanpur: Mater. Lett., 2012, vol. 74, pp. 206–8.10.1016/j.matlet.2012.01.092 ↗
27. R. Song, D. Ponge, and D. Raabe: Scripta Mater., 2005, vol. 52, pp. 1075–80.10.1016/j.scriptamat.2005.02.016 ↗
28. M.F. Ashby: Philos. Mag., 1970, vol. 21, pp. 399–424.10.1080/14786437008238426 ↗
29. J.C. Fisher, E.W. Hart, and R.H. Pry: Acta Metall., 1953, vol. 1, pp. 336–9.10.1016/0001-6160(53)90109-6 ↗
30. Q. Yuan, G. Xu, J.J. Tian, and W.C. Liang: Arab. J. Sci. Eng., 2017, vol. 42, pp. 4771–7.10.1007/s13369-017-2633-9 ↗
31. X.L. Gan, Q. Yuan, G. Zhao, H.W. Ma, W. Liang, Z.L. Xue, W.W. Qiao, and G. Xu: Metall. Mater. Trans. A., 2020, vol. 5A, pp. 2084–96.10.1007/s11661-020-05700-9 ↗
32. R.Q. Chu, Z.Q. Duan, H. Dong, K. Yang, S.X. Shou, and Z.G. Wang: Acta Metall. Sin., 2020, vol. 6, pp. 626–9.
33. X.L. Gan, Q. Yuan, G. Zhao, H.J. Hu, J.Y. Tian, and G. Xu: Steel Res. Int., 2019, vol. 90, p. 1900040. https://doi.org/10.1002/srin.201900040.10.1002/srin.201900040 ↗
34. A.G. Kalashami, A. Kermanpur, E. Ghassemali, A. Najafizadeh, and Y. Mazaheri: J. Alloy Compd., 2017, vol. 694, pp. 1026–35.10.1016/j.jallcom.2016.10.148 ↗
35. F.R. Xiao, Y.B. Cao, G.Y. Qiao, X.B. Zhang, and B. Liao: J. Iron Steel Res. Int., 2012, vol. 19, pp. 52–6.10.1016/S1006-706X(13)60020-5 ↗
36. T.S. Wang, Z. Li, B. Zhang, X.J. Zhang, J.M. Deng, and F.C. Zhang: Mater. Sci. Eng. A., 2010, vol. 527, pp. 2798–801.10.1016/j.msea.2010.01.072 ↗
37. Y. Okitsu, N. Takata, and N. Tsuji: Scripta Mater., 2009, vol. 60, pp. 76–9.10.1016/j.scriptamat.2008.09.002 ↗
38. K.T. Park and D.H. Shin: Mater. Sci. Eng. A., 2002, vol. 334, pp. 79–86.10.1016/S0921-5093(01)01796-8 ↗
39. T.S. Wang, F.C. Zhang, M. Zhang, and B. Lv: Mater. Sci. Eng. A., 2008, vol. 485, pp. 456–60.10.1016/j.msea.2007.09.026 ↗
40. L.X. Sun, N.R. Tao, M. Kuntz, J.Q. Yu, and K. Lu: J. Mater. Sci. Technol., 2014, vol. 8, pp. 731–5.10.1016/j.jmst.2014.03.008 ↗
41. M. Eskandari, A. Najafizadeh, A. Kermanpur, and M. Karimi: Mater. Des., 2009, vol. 30, pp. 3869–72.10.1016/j.matdes.2009.03.043 ↗
42. H. Ashrafi and A. Najafizadeh: Trans. Indian Inst. Met., 2016, vol. 69, pp. 1467–73.10.1007/s12666-015-0714-6 ↗
43. T.F. Jing, Y.W. Gao, X.L. Yin, G.Y. Qiao, F.R. Xiao, J. Zhao, and D.Q. Yu: Polzunov Bull., 2002, vol. 2, pp. 55–9.
44. Q.L. Yong: Microalloyed Steels Physical and Mechanical Metallurgy, China Machine Press, Beijing, 1989.
45. R.D.K. Misra, H. Nathani, J.E. Hartmann, and F. Siciliano: Mater. Sci. Eng. A., 2005, vol. 394, pp. 339–52.10.1016/j.msea.2004.11.041 ↗
46. C.S. Zheng, L.F. Li, W.Y. Yang, and Z.Q. Sun: Mater. Sci. Eng. A., 2012, vol. 558, pp. 158–61.10.1016/j.msea.2012.07.105 ↗
47. C.S. Zheng, L.F. Li, W.Y. Yang, and Z.Q. Sun: Mater. Sci. Eng. A., 2014, vol. 617, pp. 31–8.10.1016/j.msea.2014.08.050 ↗
48. K. Lu: Acta Metall. Sin., 2015, vol. 1, pp. 1–10.
49. H. Ikehata and E. Jagle: Mater. Sci. Eng. A., 2021, vol. 818, p. 141365. https://doi.org/10.1016/j.msea.2021.141365.10.1016/j.msea.2021.141365 ↗
50. J. Samei, L.F. Zhou, J.D. Kang, and D.S. Wilkinson: Int. J. Plast., 2019, vol. 117, pp. 58–70.10.1016/j.ijplas.2017.12.009 ↗
51. S.P. Yuan, R.H. Wang, G. Liu, R. Li, J.M. Park, J. Sun, and K.H. Chen: Mater. Sci. Eng. A., 2010, vol. 527, pp. 7369–81.10.1016/j.msea.2010.07.103 ↗
52. Z.H. Wang, Y. Wang, and C.M. Wang: Materials., 2018, vol. 11, pp. 1026–33.10.3390/ma11061026 ↗
53. Z. Cheng, H.F. Zhou, Q.H. Lu, H.J. Gao, and L. Lu: Science., 2018, vol. 362, pp. 559–67.
54. H.Y. Yu, S.M. Lee, J.H. Nam, S.J. Lee, D. Fabrègue, M.H. Park, N. Tsuji, and Y.K. Lee: Acta Mater., 2017, vol. 131, pp. 435–44.10.1016/j.actamat.2017.04.011 ↗