The Microstructure and Properties of Laser Shock Peened CMSX4 Superalloy
Source abstract
Abstract
Abstract The influence of laser shock peening on the surface morphology and microstructure of single-crystal CMSX4 nickel-based superalloy was investigated by optical profilometry and atomic force microscopy, scanning and transmission electron microscopy as well as scanning-transmission electron microscopy in high-angle annular dark-field mode. Maps of chemical elements distribution in the laser-affected areas were determined using energy-dispersive X-ray spectroscopy. Furthermore, after the LSP, nanohardness tests were conducted on the cross section of the treated samples as well as the untreated material. Laser shock peening caused an ablation and melting of the surface layer and hence enlarged the surface roughness. Beneath the surface, in the laser shock-peened areas, severe distortion of the regular $$ {\gamma \mathord{\left/ {\vphantom {\gamma {\gamma\prime}}} \right. \kern-0pt} {\gamma\prime}} $$ microstructure was observed. In the surface layer, down to about 15 μm, shear bands of localized deformation were formed. Moreover, the result showed that the average nano-hardness value was obviously increased in the laser-treated region.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · High Entropy Alloys Studies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. C. Korner, M. Ramsperger, C. Meid, D. Burger, P. Wollgramm, M. Bartsch, and G. Eggeler: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 3781-3792.10.1007/s11661-018-4762-5 ↗
2. X. Wu, P. Wollgramm, C. Somsen, A. Dlouhy, A. Kostka, G. Eggeler: Acta Mater., 2016, vol. 112, pp. 242-260.10.1016/j.actamat.2016.04.012 ↗
3. A. Kruk, B. Dubiel, and A. Czyrska-Filemonowicz: 2nd European Symposium on Superalloys and their Applications, MATEC Web of Conferences 14, 2014, pp. 1–5.10.1051/matecconf/20141411004 ↗
4. B. Dubiel, P. Indyga, I. Kalemba-Rec, T. Moskalewicz, Acta Phys. Pol. A, 2017, vol. 131 (5), pp. 1375- 1378.
5. M. Kattoura, S. R. Mannava, D. Qjan, V. K. Vasudevan: Int. J. Fatiqe, 2017, vol. 102, pp. 121-134.10.1016/j.ijfatigue.2017.04.016 ↗
6. C. Chen, X. Zhang, L. Han, X. Yan: J. Iron Steel Res. Int., 2018, vol. 25, pp.108-119.10.1007/s42243-017-0013-z ↗
7. B.S. Yilbas, A.F.M. Arif, S.Z. Shuja, M.A. Gondal, J. Shirokof: J. Mater. Eng. Perform., 2014, vol. 13 (1), pp. 47-5410.1361/10599490417623 ↗
8. Y. Li, L. Zhou, W. He, G. He, X.Wang, X. Nie, B. Wang, S. Luo, Y. Li. Sci. Technol. Adv. Mater, 2013, vol.14, pp. 1-9.
9. R. Brockman, W. Braisted, S. E. Olson, R. D. Tenaglia, A. Clauer, K. Langer, M. J. Shepard: Int. J. Fatique, 2012, vol. 36, pp. 96-108.10.1016/j.ijfatigue.2011.08.011 ↗
10. Y. B. Guo, M. P. Sealy, Ch. Guo: Manuf. Tech., 2012, vol. 61, pp. 583-586.10.1016/j.cirp.2012.03.125 ↗
11. A. S. Gill, A. Telang, V. K. Vasudevan: J. Mater. Process. Tech., 2015, vol. 225, pp. 463-472.10.1016/j.jmatprotec.2015.06.026 ↗
12. M. Rozmus-Gornikowska, L. Cieniek, J. Kusinski: J. Mater. Eng. Perform., 2020, vol. 29 (3), pp. 1544-1549.10.1007/s11665-020-04667-3 ↗
13. Zhuang W, Wicks B (2003) J Eng Gas Turbines Power 125(4):1021-1025.10.1115/1.1610011 ↗
14. M. Rozmus-Gornikowska, J. Kusinski, M. Blicharski: Arch. Metall. Mater., 2011, vol. 56 (3), pp. 717-721.10.2478/v10172-011-0079-8 ↗
15. S. G. Irizalp, N. Saklakoglu, B. S. Yilbas: Int. J. Adv. Manuf. Technol., 2014, vol. 71, pp. 109-115.10.1007/s00170-013-5481-0 ↗
16. Y. Trdan, J. L. Ocana, J. Grum: Mech. Engin. J., 2011, vol. 57 (5) pp. 385-393.
17. M. Rozmus-Gornikowska, J. Kusinski, M. Blicharski: Arch. Metall. Mater., 2009, vol. 54 (3), pp. 665-670.
18. M. Rozmus-Gornikowska, J. Kusinski, M. Blicharski: Arch. Metall. Mater., 2010, vol. 55 (3), pp. 635-639.
19. G. X. Lu, J. D. Liu, H. C. Qiaob, Y. Z. Zhoua, T. Jina, J. B. Zhaob, X. F. Suna, Z. Q. Hua: Opt. Laser Technol., 2017, 91, 116-119.10.1016/j.optlastec.2016.12.032 ↗
20. G. X. Lu, J. D. Liu, H. C. Qiao, T. Jin, X. F. Sun: Surf. Coat. Technol., 2017, vol. 321, pp. 74-80.10.1016/j.surfcoat.2017.04.044 ↗
21. F. I. Versnyder, M. E.Shank, Mater. Sci. Eng., 1970, vol. 6, pp. 213-247.10.1016/0025-5416(70)90050-9 ↗
22. M. Ramsperger, R. F. Singer, C. Korner: Metall. Mater. Trans. A, 2016, vol. 47, pp. 1469-1480.10.1007/s11661-015-3300-y ↗
23. Z. Shi, J. Li, S Liu: Prog. Nat. Sci., 2012, vol. 22 (5), pp. 426-432.10.1016/j.pnsc.2012.10.004 ↗
24. J. Hoffman, T. Moscicki, W. Mroz, Z. Szymanski: Laser-induced carbon plasma; modeling and experiment”, ESCAMPIG XXI, Viana do Castelo, Portugal, 2012
25. T. Moscicki: Int. J. Opt., vol. 2016, pp. 1–13.10.1155/2016/5438721 ↗
26. S. Tan, J. Wu, Y. Zhang, M. Wang, Y. Ou: Energies 2018, vol. 11, pp.1-17.
27. General Information on Element Nickel, www.efunda.com
28. T. Thorslund, F.-J. Kahlen and A. Kar: Opt Lasers Eng., 2003, 39, 51–71.10.1016/S0143-8166(02)00040-4 ↗
29. M. Ramsperger, R.F. Singer, C. Körner: Metall. Mater. Trans. A, 2016, 47 (3), 1469-8010.1007/s11661-015-3300-y ↗
30. S. Katakam, S. Santhanakrishnan, H. Vora, J. Y. Hwang, R. Banerjee, N. B. Dahotre: Phil. Mag. Lett., 2012, vol. 11, pp. 617-62410.1080/09500839.2012.704416 ↗
31. W. M. Steen, J. Mazumder: Laser material processing, Springer-Verlag, London, 201010.1007/978-1-84996-062-5 ↗
32. J. Z. Lu, K. Y. Luo, Y. K. Zhang, G. F. Sun, Y. Y. Gu, J. Z. Zhou, X. D. Ren, X. C. Zhang, L. F. Zhang, K. M. Chen, C. Y. Cui, Y. F. Jiang, A. X. Feng, L. Zhang: Acta Mater., 2010, vol. 58, pp. 5354-536210.1016/j.actamat.2010.06.010 ↗
33. Tinga T, Brekelmans WA, Geers MGD (2010) Mater. Sci. Eng. 18, 1-31
34. Z. Wen, D. Zhang, S. Li, Z. Yue, J. Gao: J. Alloys Compd., 2017, vol. 692, pp.301-31210.1016/j.jallcom.2016.09.052 ↗
35. M. Palumbo, D. Baldissin, L. Battezzati, O. Tassa, R. Wunderlich, H. J. Fecht, R. Brooks, K. Mills: Mater. Sci. Forum, 2006, vol. 508, pp. 591-59610.4028/www.scientific.net/MSF.508.591 ↗
36. H. U. Hong, B. G. Choi, I. S. Kim, Y. S. Yoo, C. Y. Jo: Procedia Eng, 2011, vol. 10, pp. 281–28610.1016/j.proeng.2011.04.049 ↗
37. B. Dubiel, P. Indyka, I. Kalemba-Rec, T. Moskalewicz.: Acta Phys. Pol. A, 2016, vol. 130, pp. 1110-1113.10.12693/APhysPolA.130.1110 ↗
38. S. Nath, P. Shukla, X-J. Shen, J. Lawrence: Lasers in Eng., 2018, Vol. 39, pp. 97–112