journal article·2020-07Open access

In Situ Investigation of the Bainitic Transformation from Deformed Austenite During Continuous Cooling in a Low Carbon Mn-Si-Cr-Mo Steel

William Lemos Bevilaqua, Jérémy Epp, Heiner Meyer, Alexandre Da Silva Rocha, Hans Roelofs

Abstract

The effects of hot deformation on the bainitic transformation of a low carbon steel during continuous cooling were comprehensively studied through in situ high-energy synchrotron X-ray diffraction, dilatometry, and ex situ microstructural characterizations. The obtained results indicated that the prior deformation of austenite at 950 °C accelerates the bainite formation at the early stages. During the ongoing of the transformation, both the overall kinetics of bainite and carbon enrichment of austenite are lower in deformed austenite. The bainitic microstructure developed from deformed austenite is more refined and presents the same retained austenite content at room temperature with slightly lower carbon content when compared with the undeformed sample. Besides, a significant higher dilatation strain was measured during the bainitic transformation in the deformed sample, which can be explained by the crystallographic texture in hot deformed austenite. The evolution of the peak broadening of the {220}γ and {211}α reflections during bainitic transformation are discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. T. Sourmail: HTM J. Heat Treat. Mater., 2017, vol. 72, pp. 371–8.10.3139/105.110342 ↗
2. H.K.D.H. Bhadeshia: Bainite in Steels: Theory and Practice, Third Edit., Maney Publishing, Wakefield, 2015.
3. D. Quidort: ISIJ Int., 2002, vol. 42, pp. 1010–7.10.2355/isijinternational.42.1010 ↗
4. V.M. Khlestov, E. V. Konopleva, and H.J. Mcqueen: Can. Metall. Q., 2014, vol. 37, pp. 75–89.10.1179/cmq.1998.37.2.75 ↗
5. R.W. Regier, A. Reguly, D.K. Matlock, J.. Choi, and J.G. Speer: Mater. Sci. Forum, 2014, vol. 783–786, pp. 85–90.10.4028/www.scientific.net/MSF.783-786.85 ↗
6. L. Guo, H.K.D.H. Bhadeshia, H. Roelofs, and M.I. Lembke: Mater. Sci. Technol., 2017, vol. 33, pp. 2147–56.10.1080/02670836.2017.1353669 ↗
7. S. Reisinger, E. Kozeschnik, G. Ressel, J. Keckes, A. Stark, S. Marsoner, and R. Ebner: Mater. Des., 2018, vol. 155, pp. 475–84.10.1016/j.matdes.2018.06.014 ↗
8. K. Yan, K.D. Liss, I.B. Timokhina, and E. V. Pereloma: Mater. Sci. Eng. A, 2016, vol. 662, pp. 185–97.10.1016/j.msea.2016.03.048 ↗
9. S.M.C. Van Bohemen: Scr. Mater., 2013, vol. 69, pp. 315–8.10.1016/j.scriptamat.2013.05.009 ↗
10. D.J. Dyson and B. Holmes: J. Iron Steel Inst., 1970, vol. 208, pp. 469–474.
11. J. Epp: Mater. Res. Proc., 2016, vol. 2, pp. 283–8.
12. S.M.C. van Bohemen: Mater. Sci. Technol., 2011, vol. 28, pp. 487–95.10.1179/1743284711Y.0000000097 ↗
13. X. Liang and A.J. Deardo: Metall. Mater. Trans. A , 2014, vol. 45, pp. 5173–84.10.1007/s11661-014-2444-5 ↗
14. P.H. Shipway and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1995, vol. 11:1116-28.10.1179/mst.1995.11.11.1116 ↗
15. H. Yi, L. Du, G. Wang, and X. Liu: J. Iron Steel Res. Int., 2006, vol. 13, pp. 36–9.10.1016/S1006-706X(06)60058-7 ↗
16. L. Du, H. Yi, H. Ding, X. Liu, and G. Wang: J. Iron Steel Res. Int., 2006, vol. 13, pp. 37–9.10.1016/S1006-706X(06)60041-1 ↗
17. M.K. Kang, D.M. Chen, S.P. Yang, and G.L. Hu: Metall. Trans. A, 1992, vol. 23, pp. 2946–7.10.1007/BF02651773 ↗
18. S.J. Lee, J.S. Park, and Y.K. Lee: Scr. Mater., 2008, vol. 59, pp. 87–90.10.1016/j.scriptamat.2008.02.036 ↗
19. C. Gupta, G.K. Dey, J.K. Chakravartty, D. Srivastav, and S. Banerjee: Scr. Mater., 2005, vol. 53, pp. 559–64.10.1016/j.scriptamat.2005.04.031 ↗
20. H.K.D.. Bhadeshia: Mater. Sci. Eng. A, 1999, vol. 273–275, pp. 58–66.10.1016/S0921-5093(99)00289-0 ↗
21. H. Hu, H.S. Zurob, G. Xu, D. Embury, and G.R. Purdy: Mater. Sci. Eng. A, 2015, vol. 626, pp. 34–40.10.1016/j.msea.2014.12.043 ↗
22. A. Eres-Castellanos, L. Morales-Rivas, A. Latz, F.G. Caballero, and C. Garcia-Mateo: Mater. Charact., 2018, vol. 145, pp. 371–80.10.1016/j.matchar.2018.08.062 ↗
23. J. He, J. Du, W. Zhang, C. Zhang, Z.G. Yang, and H. Chen: Metall. Mater. Trans. A 2019, vol. 50, pp. 540–46.10.1007/s11661-018-5038-9 ↗
24. K.D. Liss and K. Yan: Mater. Sci. Eng. A, 2010, vol. 528, pp. 11–27.10.1016/j.msea.2010.06.017 ↗
25. H. Zhao, B.P.P. Wynne, and E.J.J. Palmiere: Mater. Charact., 2017, vol. 123, pp. 128–36.10.1016/j.matchar.2016.11.025 ↗
26. A. Matsuzaki and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2010, vol. 15, pp. 518–22.10.1179/026708399101506210 ↗
27. R.Y. Zhang and J.D. Boyd: Metall. Mater. Trans. A , 2010, vol. 41, pp. 1448–59.10.1007/s11661-010-0190-x ↗
28. C. Hofer, H. Leitner, F. Winkelhofer, H. Clemens, and S. Primig: Mater. Charact., 2015, vol. 102, pp. 85–91.10.1016/j.matchar.2015.02.020 ↗
29. K. Zhu, H. Chen, J.P. Masse, O. Bouaziz, and G. Gachet: Acta Mater., 2013, vol. 61, pp. 6025–36.10.1016/j.actamat.2013.06.043 ↗
30. E.A. Ariza, A.. Nishikawa, H. Goldenstein, and A.P. Tschiptschin: Mater. Sci. Eng. A, 2016, vol. 671, pp. 54–69.10.1016/j.msea.2016.06.038 ↗
31. H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2015, vol. 31, pp. 758–63.10.1179/1743284714Y.0000000655 ↗
32. S.C. Wang and J.R. Yang: Mater. Sci. Eng. A, 1992, vol. 154, pp. 43–9.10.1016/0921-5093(92)90361-4 ↗
33. E. Mazancová and K. Mazanec: J. Mater. Process. Technol., 1997, vol. 64, pp. 287–92.10.1016/S0924-0136(96)02578-2 ↗
34. P. Huyghe, M. Caruso, J.L. Collet, S. Dépinoy, and S. Godet: Mater. Sci. Eng. A, 2019, vol. 743, pp. 175–84.10.1016/j.msea.2018.11.065 ↗
35. M. Villa, K. Pantleon, and M.A.J. Somers: J. Alloys Compd., 2013, vol. 577, pp. 1–6.10.1016/j.jallcom.2011.12.162 ↗
36. R.K. Dutta, R.M. Huizenga, M. Amirthalingam, M.J.M. Hermans, H. Gao, A. King, and I.M. Richardson: In: T. Kannengiesser, S.S. Babu, Y. Komizo, and A.J. Ramirez (eds) In-situ Studies with Photons, Neutrons and Electrons Scattering II, Springer, Cham, 2014, pp. 51–70.10.1007/978-3-319-06145-0_3 ↗
37. R. Rementeria, J.A. Jimenez, S.Y.P. Allain, G. Geandier, J.D. Poplawsky, W. Guo, E. Urones-Garrote, C. Garcia-Mateo, and F.G. Caballero: Acta Mater., 2017, vol. 133, pp. 333–45.10.1016/j.actamat.2017.05.048 ↗
38. B. Avishan, S. Yazdani, F.G. Caballero, T.S. Wang, and C. Garcia-Mateo: Mater. Sci. Technol., 2015, vol. 31, pp. 1508–20.10.1179/1743284714Y.0000000745 ↗
39. T.K. Liu, G.L. Wu, C.K. Liu, Z.H. Nie, T. Ungár, Y. Ren, and Y.D. Wang: Mater. Sci. Eng. A, 2013, vol. 568, pp. 83–7.10.1016/j.msea.2013.01.035 ↗
40. R.K. Dutta, R.M. Huizenga, M. Amirthalingam, M.J.M. Hermans, A. King, and I.M. Richardson: Metall. Mater. Trans. A , 2013, vol. 44, pp. 4011–14.10.1007/s11661-013-1829-1 ↗
41. C. Garcia-Mateo, F.G. Caballero, C. Capdevila, and C.G. de Andres: Scr. Mater., 2009, vol. 61, pp. 855–8.10.1016/j.scriptamat.2009.07.013 ↗
42. C. Goulas, A. Kumar, M.G. Mecozzi, F.M. Castro-Cerda, M. Herbig, R.H. Petrov, and J. Sietsma: Mater. Charact., 2019, vol. 152, pp. 67–75.10.1016/j.matchar.2019.03.038 ↗
43. F. Caballero, M. Miller, S. Babu, and C. Garciamateo: Acta Mater., 2007, vol. 55, pp. 381–90.10.1016/j.actamat.2006.08.033 ↗
44. B.L. Bramfitt and J.G. Speer: Metall. Trans. A, 1990, vol. 21, pp. 817–29.10.1007/BF02656565 ↗
45. S. Reisinger, G. Ressel, S. Eck, and S. Marsoner: Micron, 2017, vol. 99, pp. 67–73.10.1016/j.micron.2017.04.002 ↗
46. H. Kawata, K. Sakamoto, T. Moritani, S. Morito, T. Furuhara, and T. Maki: Mater. Sci. Eng. A, 2006, vol. 438–440, pp. 140–4.10.1016/j.msea.2006.02.175 ↗
47. C. Hofer, F. Winkelhofer, H. Clemens, and S. Primig: Mater. Sci. Eng. A, 2016, vol. 664, pp. 236–46.10.1016/j.msea.2016.04.005 ↗
48. H. Zhao, B.P. Wynne, and E.J. Palmiere: Mater. Charact., 2017, vol. 123, pp. 339–48.10.1016/j.matchar.2016.11.024 ↗
49. J.Y. Kang, S.J. Park, D.W. Suh, and H.N. Han: Mater. Charact., 2013, vol. 84, pp. 205–15.10.1016/j.matchar.2013.08.002 ↗
50. S. Zajac, V. Schwinnand, and K.H. Tacke: Mater. Sci. Forum, 2005, vol. 500–501, pp. 387–94.10.4028/www.scientific.net/MSF.500-501.387 ↗
51. G. Miyamoto, N. Iwata, N. Takayama, and T. Furuhara: J. Alloys Compd., 2013, vol. 577, pp. S528–32.10.1016/j.jallcom.2011.12.111 ↗
52. B. Verlinden, P. Bocher, E. Girault, and E. Aernoudt: Scr. Mater., 2001, vol. 45, pp. 909–16.10.1016/S1359-6462(01)01110-1 ↗
53. A. Mangal, P. Biswas, S. Lenka, V. Singh, S.B. Singh, and S. Kundu: Mater. Sci. Technol. (United Kingdom), 2014, vol. 30, pp. 1116–24.10.1179/1743284713Y.0000000487 ↗