journal article·2020-06

Interface Kinematics of Laser Impact Welding of Ni and SS304 Based on Jet Indentation Mechanism

Xiao Wang, Xiaojun Wang, Feng Li, Jiaxin Lu, Huixia Liu

Publisher page

Abstract

With the application of high-velocity impact welding (HVIW) technology, the research on the mechanism of the formation and evolution of interface waveforms has become an important research direction in HVIW. Understanding the mechanism of interface motion can help control and improve HVIW. Laser impact welding (LIW), a branch of HVIW, lacks research on the formation and evolution of interface waveforms. Therefore, LIW experiments of Ni and SS304 are carried out. The jet indentation mechanism and the smoothed particle hydrodynamics method are used to simulate and analyze the formation and evolution of the LIW interface waveform. Results show that the interface materials exhibit fluid behavior during LIW. The jet indentation mechanism can explain the formation and evolution of waveforms in LIW. Jet velocity, normal stress, and flyer horizontal welding speed are the main factors affecting the variation of the interface waveform size in LIW. At the collision point, the smaller the horizontal welding speed of the flyer, the larger the wavelength; the smaller the jet velocity, the smaller the amplitude. In addition, the propagation of the normal stress deviating from each other at the welding interface along the welding direction is the fundamental cause of springback and cracking.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Surface Treatment and Residual Stress · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Y. Zhang, S.S. Babu, C. Prothe, M. Blakely, J. Kwasegroch, M. LaHa and G.S. Daehn: J. Mater. Process. Technol., 2011, vol. 211, pp. 944-952.10.1016/j.jmatprotec.2010.01.001 ↗
2. T. DebRoy and S.A. David: Rev. Mod. Phys., 1995, vol. 67, pp. 85-112.10.1103/RevModPhys.67.85 ↗
3. J. Oliveira, T. Santos and R. Miranda: Prog. Mater. Sci., 2019, vol. 107, pp. 100590.10.1016/j.pmatsci.2019.100590 ↗
4. A. Nassiri, B. Kinsey and G. Chini: J. Mech. Phys. Solids, 2016, vol. 95, pp. 351-373.10.1016/j.jmps.2016.06.002 ↗
5. S. Chen, G.S. Daehn, A. Vivek, B. Liu, S. Hansen, J. Huang and S. Lin: Mat. Sci. Eng. A-Struct., 2016, vol. 659, pp. 12-21.10.1016/j.msea.2016.02.040 ↗
6. S. Chen, X. Huo, C. Guo, X. Wei, J. Huang, J. Yang and S. Lin: J. Mater. Process. Technol., 2019, vol. 263, pp. 73-81.10.1016/j.jmatprotec.2018.08.004 ↗
7. S. Chen, D. Yang, J. Yang, J. Huang and X. Zhao: J. Alloys Compd., 2018, vol. 739, pp. 184-189.10.1016/j.jallcom.2017.12.217 ↗
8. H. Wang and Y. Wang: Metals, 2019, vol. 9, pp. 144.10.3390/met9020144 ↗
9. W. Cai, G. Daehn, A. Vivek, J. Li, H. Khan, R.S. Mishra and M. Komarasamy: J. Manuf. Sci. Eng., 2019, vol. 141, pp. 031012.10.1115/1.4041182 ↗
10. G.S. Daehn and J.C. Lippold: Low-temperature laser spot impact welding driven without contact, U.S., Patent No. 8,084,710. 2011.
11. K. Hokamoto, T. Izuma and M. Fujita: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 1993, vol. 24, pp. 2289-2297.10.1007/BF02648602 ↗
12. A. Bahrani, T. Black and B. Crossland: Proc. R. Soc. A-Math. Phys. Eng. Sci., 1967, vol. 296, pp. 123-136.
13. A. Ben-Artzy, A. Stern, N. Frage, V. Shribman and O. Sadot: Int. J. Impact Eng., 2010, vol. 37, pp. 397-404.10.1016/j.ijimpeng.2009.07.008 ↗
14. T.Z. Blazynski: Dynamically Consolidated Composites: Manufacture and Properties. New York: Springer, 2012.
15. G. Cowan, O. Bergmann and A. Holtzman: Metall. Mater. Trans. B, 1971, vol. 2, pp. 3145-3155.10.1007/BF02814967 ↗
16. A. Kapil and A. Sharma: J. Clean Prod., 2015, vol. 100, pp. 35-58.10.1016/j.jclepro.2015.03.042 ↗
17. A. Nassiri and B. Kinsey: J. Manuf. Process., 2016, vol. 24, pp. 376-381.10.1016/j.jmapro.2016.06.017 ↗
18. A. Nassiri, S. Zhang, T. Lee, T. Abke, A. Vivek, B. Kinsey and G. Daehn: J. Manuf. Process., 2017, vol. 28, pp. 558-564.10.1016/j.jmapro.2017.04.032 ↗
19. T. Sapanathan, R.N. Raoelison, E. Padayodi, N. Buiron and M. Rachik: Mater. Des., 2016, vol. 102, pp. 303-312.10.1016/j.matdes.2016.04.025 ↗
20. A.A. Mousavi and S.T.S. Al-Hassani: J. Mech. Phys. Solids, 2005, vol. 53, pp. 2501-2528.10.1016/j.jmps.2005.06.001 ↗
21. R.N. Raoelison, T. Sapanathan, E. Padayodi, N. Buiron and M. Rachik: J. Mech. Phys. Solids, 2016, vol. 96, pp. 147-161.10.1016/j.jmps.2016.07.014 ↗
22. X. Wang, M. Shao, S. Gao, J.-T. Gau, H. Tang, H. Jin and H. Liu: J. Manuf. Process., 2018, vol. 35, pp. 396-406.10.1016/j.jmapro.2018.08.028 ↗
23. X. Wang, H. Zhang, Z. Shen, J. Li, Q. Qian and H. Liu: Opt. Lasers Eng., 2016, vol. 86, pp. 291-302.10.1016/j.optlaseng.2016.06.018 ↗
24. X. Wang, F. Li, T. Huang, X. Wang and H. Liu: Opt. Lasers Eng., 2019, vol. 115, pp. 74-85.10.1016/j.optlaseng.2018.11.012 ↗
25. A. Nassiri, G. Chini and B. Kinsey: CIRP Ann-Manuf. Technol., 2014, vol. 63, pp. 245-248.10.1016/j.cirp.2014.03.023 ↗
26. Z.L. Zhang, D.L. Feng and M.B. Liu: J. Manuf. Process., 2018, vol. 35, pp. 169-189.10.1016/j.jmapro.2018.08.004 ↗
27. M. Liu and Z. Zhang: Sci. China Phys. Mech. Astron., 2019, vol. 62, pp. 984701.10.1007/s11433-018-9357-0 ↗
28. A. Turgutlu, S.T.S. Al-Hassani and M. Akyurt: Int. J. Impact Eng., 1995, vol. 16, pp. 789-799.10.1016/0734-743X(95)00013-Z ↗
29. H. Wang: Laser impact welding and high strain rate embossing, The Ohio State University, Columbus, 2013.
30. G.R. Johnson: Proc. 7th Inf. Sympo. Ballistics, unpublished research, 1983.
31. J.A. Zukas: High velocity impact dynamics, Wiley, New York, 1990.
32. ANSYS Autodyn User’s Manual. Release 18.0. ANSYS.
33. Q. Chu, M. Zhang, J. Li and C. Yan: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2017, vol. 689, pp. 323-331.10.1016/j.msea.2017.02.075 ↗
34. H.J. McQueen: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2004, vol. 387-389, pp. 203-208.10.1016/j.msea.2004.01.064 ↗
35. X. Zeng, X. Li, X. Chen, X. Wang and H. Yan: Weld. World, 2019, vol. 63, pp. 967-974.10.1007/s40194-019-00733-0 ↗
36. I.A. Bataev, S. Tanaka, Q. Zhou, D.V. Lazurenko, A.M.J. Junior, A.A. Bataev, K. Hokamoto, A. Mori and P. Chen: Mater. Des., 2019, vol. 169, pp. 107649.10.1016/j.matdes.2019.107649 ↗
37. S. Sadeh, G.H. Gleason, M.I. Hatamleh, S.F. Sunny, H. Yu, A.S. Malik and D. Qian: Metals, 2019, vol. 9, pp. 1196.10.3390/met9111196 ↗
38. Y. Kaya: Metal, 2018, vol. 8, pp. 780.10.3390/met8100780 ↗
39. X. Wang, M. Shao, H. Jin, H. Tang and H. Liu: J. Mater. Process. Technol., 2019, vol. 269, pp. 190-199.10.1016/j.jmatprotec.2019.02.005 ↗