Ultrasonic-Induced Phase Redistribution and Acoustic Hardening for Rotary Ultrasonic Roller Burnished Ti-6Al-4V
Source abstract
Abstract
Ultrasonic energy can promote the dislocation motion in ultrasonic-assisted machining. The phase redistribution of Ti-6Al-4V alloy will occur in ultrasonic-assisted machining with appropriate ultrasonic powers. The variations of the volume fractions of β-Ti and α-Ti influence the microhardness on the processed surface. In the present paper, various rotary ultrasonic roller burnishing experiments were conducted to investigate the ultrasonic-induced phase redistribution of Ti-6Al-4V at different ultrasonic powers. The volume fractions of β-Ti and α-Ti were measured by X-ray diffraction. SEM images of the processed surfaces were used to analyze the microstructure evolution and grain refinement of Ti-6Al-4V at various ultrasonic powers. Then, the distributions of local misorientation, texture and grain boundary were observed by EBSD. The results indicated that the microhardness approached the maximum value on the processed surface while the volume fraction of β-Ti reached its maximum value. Finally, the modified phenomenological model was applied to elucidate the relationship among the microhardness, the phase volume fractions and the grain refinement. The fitting degree for microhardness between the modified phenomenological model prediction and experimental measurement was 92.2 pct.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. F. Blaha and B. Langenecker: Sci. Nat. Heidelberg., 1955, vol. 42, pp. 556–55.10.1007/BF00623773 ↗
2. B. Langenecker: IEEE Trans. Sonics Ultrasonics., 1966, vol. 13, pp. 1–8.10.1109/T-SU.1966.29367 ↗
3. B. Langenecker and C.W. Fountain: Phil. Mag., 1965, vol. 11, pp. 512-519.10.1080/14786436508224238 ↗
4. A. Abdulla, M. Sotoodezadeh, R. Abedini and V. Fartashvand: Int. J. Precis. Eng. Manuf., 2013, vol. 14, pp. 191–98.10.1007/s12541-013-0027-9 ↗
5. C. Yang, X. Shan and T. Xie: Int. J. Adv. Manuf. Technol., 2016, vol. 83, pp. 645–55.10.1007/s00170-015-7540-1 ↗
6. Y. Wang, H. Gong, F.Z. Fang and H. Ni: Int. J. Adv. Manuf. Technol., 2016, vol. 83, pp. 461–74.10.1007/s00170-015-7549-5 ↗
7. Z. Yao, G.Y. Kim, L. Faidley, Q. Zou, D. Mei and Z. Chen: Mater. Manuf. Process., 2013, vol. 28, pp. 584–588.10.1080/10426914.2012.667890 ↗
8. Y. Liu, L.J. Wang and D.P. Wang: J. Mater. Process. Technol., 2011, vol. 211, pp. 2106–13.10.1016/j.jmatprotec.2011.07.009 ↗
9. A.T. Bozdana, N.N.Z. Gindy and H. Li: Int. J. Mach. Tools Manuf., 2005, vol. 45, pp. 713–18.10.1016/j.ijmachtools.2004.09.017 ↗
10. J. Huuki and S.V. Laakso: P. I. Mech. Eng. B-J. Eng., 2013, vol. 227, pp. 45–53.
11. J. Huuki, M. Hornborg and J. Juntunen: J. Eng., 2014, vol. 2014, pp. 5–7.
12. M. Salmi, J. Huuki and I.F. Ituarte: Prog. Addit. Manuf., 2017, vol. 2, pp. 31-41.10.1007/s40964-017-0017-z ↗
13. Z.H. Yao, G.Y. Kim, Z.H. Wang, L.A. Faidley, Q.Z. Zou, D.Q. Mei and Z.C. Chen: Int. J. of Plasticity., 2012, vol.39, pp. 75-87.10.1016/j.ijplas.2012.06.003 ↗
14. T. Wen, L. Wei, X. Chen and C.L. Pei: Int. J. Miner. Metall. Mater., 2011, vol. 18, pp. 70–76.10.1007/s12613-011-0402-4 ↗
15. T. Liu, J. Lin, Y. J. Guan, Z. D. Xie, L. H. Zhu and J.Q. Zhai: Ultrasonics., 2018, vol. 89, pp. 26–33.10.1016/j.ultras.2018.04.006 ↗
16. A. Maurotto, R. Muhammad, A. Roy and V.V. Sillberschmidt: Ultrasonics., 2013, vol. 53, pp. 1242–50.10.1016/j.ultras.2013.03.006 ↗
17. Y.C. Wang and T.G. Langdon: Mat. Sci. Eng. A., 2013, vol. 559, pp. 861–67.10.1016/j.msea.2012.09.034 ↗
18. J. Fu, H. Ding, Y. Huang, W. Zhang and T.G. Langdon: J. Mater. Res. Technol., 2015, vol. 4, pp. 2–7.10.1016/j.jmrt.2014.10.006 ↗
19. H.W. Zhou, H.Q. Liu, D.Q. Yi, Y. Xiao, X.L. Zhao, J. Wang and Q. Gao: J. Iron. Steel. Res. Int., 2017, vol. 24, pp. 811–22.10.1016/S1006-706X(17)30121-8 ↗
20. J.W. Elmer, T.A. Palmer, S.S. Babu and E.D. Specht: Mat. Sci. Eng. A., 2005, vol. 391, pp. 104–13.10.1016/j.msea.2004.08.084 ↗
21. S.L. Semiation, S.L. Knisley, P.N. Fagin, D.R. Barker and F. Zhang: Metall. Mater. Trans. A., 2003, vol. 34, pp. 2377–386.10.1007/s11661-003-0300-0 ↗
22. P. Nandwana, Y. Lee, C. Ranger, D.R. Anthony, R.D. Ryan and S.B. Sudarsanam: Metall. and Mat. Trans. A, 2019, vol. 50, pp. 3429–39.10.1007/s11661-019-05247-4 ↗
23. X. Tan, Y. Kok, Y.J. Tan, M. Descoins, D. Mangelinck, S.B. Tor, K.F. Leong and C.K. Chua: Acta. Mater., 2015, vol. 97, pp. 1–16.10.1016/j.actamat.2015.06.036 ↗
24. A.A. Antonysamy, J. Meyer and P.B. Prangnell: Mater. Charact., 2013, vol. 84, pp. 153–68.10.1016/j.matchar.2013.07.012 ↗
25. J. Donoghue, A.A. Antonysamy, F. Martina, P.A. Colegrove, S.W. Williams and P.B. Prangnell: Mater. Charact., 2016, vol. 114, pp. 103–14.10.1016/j.matchar.2016.02.001 ↗
26. E. Chikarakara, S. Naher and D. Brabazon: Surf. Coat. Tech., 2012, vol. 206, pp. 3223–29.10.1016/j.surfcoat.2012.01.010 ↗
27. F. Martina, P.A. Colegrove, S.W. Williams and J. Meyer: Metall. and Mat. Trans. A, 2015, vol. 46, pp. 6103–18.10.1007/s11661-015-3172-1 ↗
28. J. Hu, T. Shimizu and M. Yang: Ultrason. Sonochem., 2018, vol. 48, pp. 240–48.10.1016/j.ultsonch.2018.05.039 ↗
29. J. Zhao and Z.Q. Liu: Mater. Des., 2016, vol. 107, pp. 238–49.10.1016/j.matdes.2016.06.024 ↗
30. V. Fartashvand, A. Abdullah and S.A.S. Vanini: Ultrason. Sonochem., 2016, vol. 38, pp. 744–49.10.1016/j.ultsonch.2016.07.007 ↗
31. J. Luo, M. Li, W. Yu and H. Li: Mat. Sci. Eng. A., 2009, vol. 504, pp. 90–98.10.1016/j.msea.2008.10.020 ↗
32. X.G. Fan, H. Yang, Z.C. Sun and D.W. Zhang: Mat. Sci. Eng. A., 2010, vol. 527, pp. 5391–99.10.1016/j.msea.2010.05.056 ↗
33. S. Mironov, M. Murzinova, S. Zherebtsov, G.A. Salishchev and S.L. Semiatin: Acta. Mater., 2009, vol. 57, pp 2470–81.10.1016/j.actamat.2009.02.016 ↗
34. C. Leyens and M. Peters: Titanium and Titanium Alloys: Fundamentals and Applications, First ed., Wiley, Weinheim, 2003, pp. 3–6.10.1002/3527602119 ↗
35. J.J. Lin, Y.H. Lv, Y.X. Liu, B.S. Xu, Z. Sun, Z.G. Li and Y.X. Wu: Mater. Des., 2016, vol. 102, pp. 30–40.10.1016/j.matdes.2016.04.018 ↗
36. H. Zhou, H. Cui, Q.H. Qin, H. Wang and Y. Shen: Mat. Sci. Eng. A., 2017, vol. 682, pp. 376–88.10.1016/j.msea.2016.11.021 ↗
37. B. Nagarajan, D. Kumar, Z. Fan and S. Castagne: Mat. Sci. Eng. A., 2018, vol. 728, pp. 196–207.10.1016/j.msea.2018.05.005 ↗
38. S. Roy and S. Suwas: J. Alloy. Compd., 2013, vol. 548, pp. 110–25.10.1016/j.jallcom.2012.08.123 ↗
39. Y. Liu and M. Li: Mat. Sci. Eng. A., 2016, vol. 669, pp. 7–13.10.1016/j.msea.2016.05.088 ↗
40. G. Rotella, O.W.J. Dillon, D. Umbrello, L. Settineri and I.S. Jawahir: Int. J. Adv. Manuf. Technol., 2014, vol. 71, pp. 47–55.10.1007/s00170-013-5477-9 ↗
41. P.C. Collins, C.V. Haden, I. Ghamarian, B.J. Hayes, T. Ales, G. Penso, V. Dixit and G. Harlow: Jom., 2014, vol. 66, pp 1299–1309.10.1007/s11837-014-1007-y ↗
42. F. Khodabakhshi, M. Haghshenas, H. Eskandari and B. Koohbor: Mat. Sci. Eng. A., 2015, vol. 636, pp 331–39.10.1016/j.msea.2015.03.122 ↗